Zybo työt

DEADLINE 21st I need an Object Detection(displays text on screen of object name) & Live Streaming system(records video when switch or button pressed), all to be implemented on a Zybo Z7 board with a pcam 5c camera module. Here are the details: - **Programming Language**: The system needs to be developed using verilog and xlinx tools. - **Standalone or Integrated**: I'm looking for the Object Detection & Live Streaming system to be integrated with zyboz7 and pcam5c. - **Functionality**: The system should perform real-time object detection and identification, as well as record and store live streams for later analysis. Finally report that includes tests/testbenches should be included based on requirements in

I'm looking for a developer to create a system for my Zybo Z7 board that can detect people in real-time through a connected pcam5c camera and display the detection text on the video feed(to be honest anything that can tick the extra feature given in requirements). I'd also like to record video on pcam(my files i've started working on are (zip too big)and requirements) and need to include a report with testbenches(requirements attatched). Deadline is 21st Key Requirements: - Object Detection: The system should be able to detect people accurately. - Real-time Video Streaming: The video feed should be streamed in real-time. - Text Overlay: The detection results should be displayed as a text overlay on the video. Skills/Experience Required: - Proficient in Xilinx SDK...

I wanted to design a snake game using zybo board Zybo-XCZ010-1CLG400C. The programming language should be VHDL and it has to interfaces on a monitor using vgi cable and the snake should be controlled using the buttons on the zybo board . The movements of the snake is UP , down , right and left . Also one of the button should be dedicated to pause and continue the game .

...K-line, J1850 and DoIP required, per manufacturer spec 4. Interface needs to centre around an FPGA, to allow for future feature upgrade. FPGA firmware code to be written in either SystemC (preferred) or VHDL. In either case, needs to be fully documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided

Project: Microcontroller Communication over Ethernet Subject: Data transfer between two zybo boards which are connected to laptop. Software: Vivado 2018.3 Hardware: Zybo board (Not mandatory to have it with you, testing part will be done at our end) Eg: If we try to send character "a" from one zybo board to another, it has to pick up and turn on the LED.

Project: Microcontroller Communication over Ethernet Subject: Data transfer between two zybo boards which are connected to laptop. Software: Vivado 2018.3 Hardware: Zybo board (Not mandatory to have it with you, testing part will be done at our end) Eg: If we try to send character "a" from one zybo board to another, it has to pick up and turn on the LED.

Hardware: Zybo board (If you don't have that, we will handle that part of testing in hardware) Software: Vivado (Version: 2018.3) Subject: Data transfer between two zyb boards over ethernet. (Zybo boards will be connected to laptops) Eg: If we try to send character "a" from one zybo board to another board then it has to sense the data and turn on the LED light. PS: You just need to do the coding part then the testing part will be done by us.

I need someone write Verilog code for pan Tompkins algorithm to detect ECG QRS, Bpm, Heart rate make IP core on vivado ECG sensor AD8232 needs to connect to zybo board then get Bpm using vivado program.

I wanna connect sensor Max30100 with zybo using vivado and SDK program(C language).

I wanna connect sensor Max30100 with zybo using vivado and SDK program(C language).

I need some one write veriloge code for pan tompkins algorithm to detect ECG QRS, Bpm , Heart rate , contact ECG sensor with FPGA zybo

I wanna connect sensor Max30100 with zybo using vivado and SDK program(C language).

I wanna connect sensor Max30100 with zybo using vivado and SDK program(use c).

Create Free rtos based system running on Zybo boardfolllowing feature: *)High priority task that is self blocking *)Scan 4 bit input port connected to press button the button should be polled at an approx 5ms interval and be stable for 20 msdebounced button acces via GPIO hardware or usal AXI gpio *)For efficency the entier port is to be treated as single input rather than individually debouncing the 4 button *)Debounced switch presses and releases are to be entered into a que of event for processing by another task. A suitable data structure/ type should be created to represent event *)Lower prioroty task that process events from the queue and report them on the console.

expert in zybo z7 board and xilinx vivado software need to store data coming to the zybo z7 board and saving it on sd card ( data logging)

Expert on Xilinx Vivado and Zybro Z7 board. Having expertise in VHDL and FPGA. We need to store data that is coming from Zybo Z7 board in text or C file in MircroSD.

Hi! We have a project where we have a raw image in FPGA... We need to convert it to jpeg and move it to memory (DDR3). The board we're using is a Zybo Z7-20 from Diligent. Code is already done to get the image from the camera sensor and the bayer filter... These are 2 samples code i could find on internet Open core Paper with source code ~yc3096/cad/ Thanks!

1. You should have an AMBA AXI based design with an ARM processor. 2. Let us say, from your computer you transfer an image to a memory for Harris Corner detection. 3. Once you release the reset, your design should read the image in the memory and calculate the corners and generate an output image, 4. There should be an indication saying the HC is done; then you should read the image from memory using an ARM processor and display on your computer. 5. For a final demo, a sequence images should be used which will be processed one after the other in sequence.

Hi, I currently have a project to offer you. I want to make a music visualizer to be displayed on a monitor. I am using Xilinx Vivado 2019.1 and the Digilent Zybo Z7 development board. Please send me a message if you would like to further discuss this.

Get one normal image in Zybo Z7 with PCam 5c Camera and send it to a computer, then do another one. In another mode, process image (join several of them) and send it to the computer, then do another one. Communication by Ethernet. If it's easier on another board we can talk about it Done on Vivado or any other software... Source code required Thanks!

Hi, I need : * ANN IN FPGA using my mac unit? *zybo-zynq-7000-arm-fpga-soc-trainer-board/ *verilog *MNIST

Hi need someone experienced for car detection and classification in zybo z7-10 FPGA board.. the out must show on monitor as well must be there on serial Pmod..

The above project i want to execute on VIVADO and SDK

Wanted to run this Project in My ZYBO board Wanted to finish by end of this day.

An upload of a song is done from computer to Zybo by using a Wifi Pmod and audio processing operations like low-pass and band-pass filtering using FIR filter with adjustable cut-off frequency and bandwidth will be done on Zybo. The processed audio will be played using audio codec and necessary options will be displayed on a OLED Pmod for selection.

I wanted to code Moving Objects detection and Tracking on Vivado integration with Vivado. HW platform ZYBO Z7-10 Board.

I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

I'm trying to port PYNQ over to a diligent board that is not directly supported. I'm hoping somebody has already done this that would be willing to share their SD card files with me to save me the trouble. I'm looking for PYNQ version 2.2 or 2.3. Please and thankyou.

Viết phần mềm chạy trên bo Zybo thu tín hiệu từ hai chân GPIO một chân clk 1 chân data. Khi chân clk chuyển mức tín hiệu từ thấp lên cao thì đọc dữ liệu chân data. tần số chân clk 16.368Mhz. Ghi dữ liệu đọc được từ chân data vào file trên thẻ nhớ 30s một file.

Good evening, I'm trying to make a project but I haven't purchased a board yet because I'm not sure which board to buy. So far, I've looked at the Zybo-Z7 or Arty-Z7. You will need to have these boards already obviously to complete this project. They both have sample projects for HDMI in and HDMI out. What I'm trying to accomplish is have: 1) PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes over the income HDMI feed from the PC....

Hi Ahmed M., I noticed your profile and would like to offer you my project. My project is to solve the problem. The problem is written in the following link. Can you solve my problem? Do you have experience using Petalinux or embbeded Linux?

I need someone who can walk me through building linux for zybo or Zed Board. And also how to develop device drivers.

Please solve my problem, please teach the solution method and deliver the project file. This project is relevant to FPGA, Ubuntu. My problem is the following. =========================== I want to get image from Pcam 5C from Ubuntu running on ZYBO-Z7-20. First, I cloned this repository,() and tested pre-built image. I could get camera image by command-line. Next, To use ubuntu, I changed the configuration and built petalinux project. $ petalinux-config Linux Components Selection -> u-boot -> u-boot-plnx Linux Components Selection -> linux-kernel -> linux-xlnx Image Packaging Configuration -> Root filesystem type -> SD card And I modified project-spec/meta-user/recipes-bsp/device-tree/files/ as described in README.md. After

Benutzt werden die importieren Informationen aus Vivado. Ich habe bereits eine Applikation in SDK geschrieben. Diese läuft jedoch noch nicht richtig... Also es soll eine Datei aus der SD-Card im Zybo-Board zu einem Computer über FTP geschickt werden. Am besten im lwip Raw api als standalone

*The purpose and overview of my project I am designing easy application on zynq programmable ...HW/S15/tutorials/tutorial_4_files/example_c_code.c *Problem I build the project, and run on ZYBO. The result is the following. Error : RxBuffer[0] = 0 Error : RxBuffer[1] = 0 Error : RxBuffer[2] = 0 Error : RxBuffer[3] = 0 Error : RxBuffer[4] = 0 Error : RxBuffer[5] = 0 RxBuffer[6] = 11 RxBuffer[7] = 12 RxBuffer[8] = 13 RxBuffer[9] = 14. … The first 5 values of the beginning is wrong. *Notice I want to use C code for high-synthesizing and application code. Don't use C++ code. *Deliverable *design file and project file which run correctly *the explanation why my design doesn't work *My environment Vivado 2015.4 Vivado HLS 2015.4 SDSoC 201...

*The purpose and overview of my project I am desi...HW/S15/tutorials/tutorial_4_files/example_c_code.c *Problem I build the project, and run on ZYBO. The result is the following. Error : RxBuffer[0] = 0 Error : RxBuffer[1] = 0 Error : RxBuffer[2] = 0 Error : RxBuffer[3] = 0 Error : RxBuffer[4] = 0 Error : RxBuffer[5] = 0 RxBuffer[6] = 11 RxBuffer[7] = 12 RxBuffer[8] = 13 RxBuffer[9] = 14. … The first 5 values of the beginning is wrong. *Notice I want to use C code for high-synthesizing and application code. Don't use C++ code. *Deliverable *design file and project file which run correctly *the explanation why my design doesn't work *My environment Vivado 2015.4 Vivado HLS 2015.4 SDSoC 2015.4 Board zedboard, zybo *I am th...

Using ZYBO Zynq 7000 Dev Board & Vivado 2017.2.1, the project goal is to display ADC result on VGA. It has to be done in a week. (By 11/10/2017)

Hi I am trying to create custom IP block for the Zybo Hardware using Xilinix Vivado 2016.4. The custom IP needs to poll for the input of the knob (PWM signal) and show it as a value of counter. At the same time, it need to poll for the input of the button as well I need this to be done on urgent basis, so only members who knows VHDL, have worked on Vivado 2016.4 and have the software, bids Please PM for further details

I am struggling really badly in understanding the hardware and software co design. I have couple of projects that needs to be done, please PM me for details

Hi! My name's Stefano and I am a Computer Engeneering Student at Politecnico di Torino in Italy. I am doing a project for my course of Computer Architecture and I need to create a videogame using a zybo. I''ve seen that you have completed a project called "Interfacing DDR3 sdram in zynq using vivado vhdl". This is the part that I have to do in my group project, and it is very difficult for me. Could you please share your work with me? Unfortunatly I don't have any money for paying you, so I'm really just asking an act of kindness from you. You can contact me at @ Thanks for reading this, have a good life!

Hi ahmedmohamed85, oscilloscope and spectrum analyser using Zybo Zynq™-7000 Development Board and matlab

Hi ahmedmohamed85, I noticed your profile and would like to offer you my project, digital oscilloscope project using Zybo Zynq-7000. We can discuss any details over chat.

the project is to design the game tic tac to both in hardware and in software. equipments used zybo-7000 PmodKYPD PmodOLED programmes used VIVADO 2014.1 XILINIX SDK 2014.1 The basic function of this design is to receive every player input using a keypad and display them into the OLED Pmod as an output. However, the first player who succeeds to make a straight horizontal, vertical, or diagonal line of the same three characters will be the winner. The system will be using two different characters to distinguish between the two player’s inputs. In case, if neither players were able to complete a straight line of three characters and the total of inputs is nine, then it is a tie game. Requirements Specifications: The system shall do the followings: Use...

implement a fm transmitter on the fgpa board!

implement a fm transmitter on the fgpa board!