Tekniikka Jobs

Chemical Engineer required for writing project.. I will provide you details but you have to write Abstract, Introduction and Results and discussion.

Project Title: 19227-COMSOL Simulation Purpose of the COMSOL simulation: Investigation of the internal arc behavior of high voltage outdoor terminations Requirements for successful freelancers: - Past work: Please include examples of previous COMSOL simulation projects related to heat transfer, fluid dynamics, or electromagnetic fields Specific requirements for the simulation results: - Detailed specifications: The client has specific requirements for the simulation results, which will be provided to the selected freelancer Ideal skills and experience for the job: - Strong proficiency in COMSOL simulation software - Expertise in analyzing heat transfer, modeling fluid dynamics, or simulating electromagnetic fields - Understanding of high voltage outdoor terminations and internal arc...

I am looking for a freelancer who can simulate specific renewable energy system using MATLAB SIMULINK or LABVIEW. The ideal candidate should have experience in simulating renewable energy systems and be proficient in either MATLAB SIMULINK or LABVIEW. Project Requirements: - Simulate a required renewable energy system - Use either MATLAB SIMULINK or LABVIEW for the simulation Ideal Skills and Experience: - Proficiency in MATLAB SIMULINK or LABVIEW - Experience in simulating renewable energy systems Additional Information: - The level of complexity required for the simulation is basic - No specific output or result is needed from the simulation, any output is fine.

Project Title: Need 32amp power outlet in Garage I am looking for someone to install a 32amp power outlet in my garage. Power Outlet Type: - Currently, there is no power outlet in the garage, so the new outlet needs to be installed from scratch. Location: - I am open to suggestions for the best location to install the power outlet. Purpose: - The main purpose of the new power outlet is for charging an electric vehicle. Skills and Experience: - Experience in electrical installations and wiring. - Knowledge of electrical codes and regulations. - Familiarity with different types of power outlets and their specifications. - Ability to provide recommendations for the best location based on the client's needs. - Understanding of electric vehicle charging requirements and equipment.

I am looking for a kinematics engineer to assist with motion analysis for a basic level project. The specific aspect of kinematics engineering that I need assistance with is motion analysis. I do not have any specific software preferences for this project. The ideal candidate should have experience with kinematics engineering and be proficient in motion analysis.

I am looking for a skilled freelancer to create a timer based device that can dispose of medium-sized food portions once an hour in an indoor environment. The device should be designed to handle meal portions and be suitable for indoor use. My mom has alzheimer and she’s a smoker and I want to make something that disposes a cigarette once an hour for her with the ability to add a voice recording to it maybe. Please let me know if you need more information Ideal Skills and Experience: - Experience in designing and building timer-based devices - Knowledge of food disposal mechanisms and systems - Understanding of indoor environmental requirements and safety regulations

Concrete Wall Repair Recommendations I am looking for a structural engineer to evaluate and recommend method of repair of cracks and spalling on tilt-up concrete walls. The ideal candidate will have experience in concrete wall repairs. Preferred Repair Method While I do not have a preferred repair method, I am open to suggestions and recommendations from the engineer. Number of Sections There are more than 7 sections of the concrete wall that need to be repaired. It is important that the engineer and contractor have the capacity and resources to handle a project of this size. Skills and Experience To successfully complete this project, the contractor should possess the following skills and experience: - Extensive knowledge and experience in concrete wall repairs - Familiarity wi...

I am looking for a freelancer who is experienced in conducting static analysis simulations using Autodesk Nastran. The ideal candidate should have a strong understanding of structural dynamics and be able to accurately analyze the behavior of the model. Skills and experience required for this project: - Proficiency in Autodesk Nastran for dynamic analysis simulations - Strong knowledge of structural dynamics and analysis techniques - Ability to accurately interpret and analyze simulation results - Experience in model validation and verification - Attention to detail and ability to troubleshoot and resolve simulation issues The end goal of the simulation is to gain a comprehensive understanding of the behavior of the model.

I am seeking a chemical formulation consultant with expertise in Ayurvedic soap formulation. The ideal candidate should have experience in both the formulation and production process. Additionally, they should be able to incorporate specific ingredients that I provide into the formulation. We are ayurvedic soap manufacturer mainly Gram Flour soap Grade 1 with 78% TFM using Soap Noodles base.

I want to design on CATIA or SolidWorks a linear guide containing a motor, an elastic coupling, a ball screw with a specific diameter, two bearings with their housings, and an embedded carriage with the nut of the screw that translates along a given stroke."

Project Title: Seeking a Solar Power Engineer for Window-Powered Solar System Design I am in need of a skilled solar power engineer who can assist me in inventing windows powered by solar energy. Specific Area of Assistance: - Expertise in photovoltaic systems and solar thermal systems - Experience in solar power plant design Specific Requirements: - None specified; I am open to suggestions and innovative ideas Expected Completion Timeframe: - Within a month Ideal Skills and Experience: - Strong background in solar power engineering - Proficient in photovoltaic systems, solar thermal systems, and solar power plant design - Innovative thinking and ability to develop window-powered solar systems - Ability to meet project deadlines and work efficiently Note: Please provide a portfolio ...

I am looking for a freelancer to help me with my project to control 3 dampers on a temperature probe. The ideal candidate will have experience in electronic control systems and a strong understanding of temperature regulation. Requirements: - Experience with electronic control systems for damper control - Knowledge of temperature probes and their operation - Ability to design and implement a system to prevent overheating - Familiarity with room temperature range and its implications on temperature control Skills: - Electronic control systems - Temperature regulation - System design and implementation - Troubleshooting and problem-solving If you have the necessary skills and experience, please submit your proposal.

Chemical Engineer required for writing task. Further details via PM

Chemical Engineer required for writing task. Small task.

I am looking for a freelancer who is experienced in control engineering and can help me with a PID control assignment. Skills and Experience: - Strong knowledge and understanding of PID control - Familiarity with control engineering principles and concepts - Ability to conduct detailed analysis and provide accurate solutions - Proficiency in using relevant software and tools for control engineering assignments Requirements: - The freelancer should be able to analyze the given problem in detail and provide a comprehensive analysis. - The assignment requires a detailed analysis, so the freelancer should be able to provide in-depth explanations and calculations. - The freelancer can use their own sources for reference materials. - The deliverable should include a detailed analysis report a...

We are seeking an electrical engineer with a PhD in the field to provide assistance with deepening EEG signals. The project involves the following tasks: - Algorithm development: The main focus of the project is to develop algorithms for processing EEG signals. - Data analysis: The engineer will be responsible for conducting thorough data analysis on the EEG signals. - Hardware setup: The engineer should be experienced in setting up the necessary hardware for EEG signal acquisition. Ideal Skills and Experience: - PhD in electrical engineering or a related field, with a specialization in EEG signal processing. - Strong knowledge of algorithm development and data analysis techniques. - Experience in setting up hardware for EEG signal acquisition. - Familiarity with specific software usage...

Chemical Engineer required. Place bid if you can start now.

Description of the mechanism: By turning a manual crank the mechanism activates a microswitch to activate an electronic circuit. The rotation is continuous and the microswitch must remain activated while rotating. When you stop turning the crank, the microswitch is deactivated, deactivating the electronic circuit.

Project Title: Dual Saw Design Purpose: - The purpose of the dual saw design is to facilitate foam material cutting for projects. - The design should allow for dato cuts on the top and bottom side of the material simultaneously. requires to be parallel. Design Requirements: - The client is open to suggestions and does not have any specific design preferences. - The design should be efficient and effective in achieving the desired purpose. Time Frame: - The client expects the completion of the design within a month. Ideal Skills and Experience: - Experience in designing cutting tools and machinery. - Proficiency in foam material cutting techniques. - Knowledge of woodworking and metalworking projects. - Ability to provide innovative and practical design solutions. - Timely delivery of...

Project Description: Developing a method to solve a simple mathematics problem with a simplified explanation Skills and Experience Required: - Strong background in mathematics, especially in advanced concepts - Ability to simplify complex mathematical problems for easy understanding - Proficiency in problem-solving techniques and logical thinking - Experience in teaching or tutoring mathematics is a plus Project Requirements: - Develop a method to solve a specific simple mathematics problem - Provide a simplified explanation of the solution - Ensure the solution is easy to understand for individuals with an advanced level of understanding in mathematics Deliverables: - Detailed explanation of the problem-solving method - Simplified explanation of the solution - Clear and concise documen...

Electrical Engineer I am Imran Rashid and I am founder of company named SMALL WORD ONLINE SERVICES registered since 2013 in UK. We offer various services including Electrical Designs to our clients. Due to expansion of our business, we need more contractor who can provide the best services to our clients. I’m looking for Electrical Designs. He/she shall expert in Electrical Designs and hardworking. If interested please Provide a few examples of your work and let me know what you charge for a given level of quality. Also, so I know that you’ve read and understood this job post, please start off your response with how many years you’ve been doing this for. Cheers, Regards Imran Rashid

1. We need to design a torsion springs. They will be used for the unfolding of 2 wind towers. 2. Emphasis should be placed on the fact that the repulsive force should work on decomposition. And during assembly, this force must be overcome by the worker who assembles the sections of the tower. That is, the force of the spring should not be strong, but should fulfill its role. 3. The movement and control of unfolding/folding is done by a human using cables attached to each section of the towers. 4. Offer options for attaching springs to tower sections. 5. The estimated weight of the tower sections is 70 kg, but we accept it as 100 kg. We can provide drawings of towers and sketch of a spring.

Project Title: Control Systems Expert Needed for Immediate Task I am looking for an expert in mechatronics with specific expertise in control systems. Nature of the Task: - The task involves completing a given task related to control systems. - This could include designing a control system, troubleshooting an existing control system, or maintaining a specific control system. Deadline: - The task needs to be completed within one day. Skills and Experience: - Proven experience and expertise in mechatronics, with a focus on control systems. - Strong knowledge of control system design, troubleshooting, and maintenance. - Proficiency in relevant software tools and programming languages. - Ability to work efficiently and meet tight deadlines. If you are an expert in mechatronics and have t...

Project Description: I am looking for a freelancer who can conduct a stress analysis (FEA) for a STP file. The intended use of the stress analysis results is for failure prediction. The material properties of the object in the STP file are known and can be provided. I require a high level of accuracy for the stress analysis. Skills and Experience: - Proficiency in stress analysis and FEA - Experience in conducting failure prediction analysis - Strong knowledge of material properties and their impact on stress analysis - Ability to work with STP files - Attention to detail and ability to provide high accuracy results

On existing frame work such as make, Google form, and other software plugsin chats gpt Required expertise in social media and high engagement and likes expertise CRM Reply to customers for small space , to arrange spot on bookings, trigger to send invoice after placement of spot, follow up on what's app message CRM 2 Social media multiple accounts postings on multiples social media accounts To boost followers, engagement and likes on trending content creations CRM 3 Community building , allowing community to build a followers, foster growth

I am looking for a freelancer who can use Simulink to analyze a high voltage generator schematics. There are a few modules in the schematics, including - a PWM control module, which takes the inputs of preset parameter and the sample feedback to auto-adjust itsPWM output - HV Drive that drives the HV power module - HV power module that contains a transformer and a Voltage Multiplier. It also samples the voltage and feedback to the PWM for auto-adjust. The schemeatics will be provided. Analysis Required: - I am looking for both efficiency and stability analysis from the Simulink model. Ideal Skills and Experience: - Proficiency in Simulink and its various analysis tools - Strong understanding of high voltage generator schematics - Experience in analyzing efficiency and sta...

<Overview> Please collect information on vehicles or service information that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology is related to vehicle navigation systems. A problem with using a vehicle's navigation system is that the user must enter information about the destination themselves. To solve this problem, the in-vehicle computer acquires information about the car's current location and direction of travel, as well as information about the user (schedules, frequently used routes, etc.) stored in the cloud, etc., and uses these to predict the destination. It then provides the user with information related to the destination. Information related to the destination i...

<Overview> Please collect product information on vehicles information that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology is used to automatically open and close vehicle windows, such as power windows. One of the problems that can occur when parking a vehicle is that if the windows of the vehicle are completely closed, the temperature inside the car may become too high. To solve this problem, this technology observes the temperature inside or outside the vehicle and opens and closes the vehicle's windows based on the observed temperature. In particular, the technology determines how much to open the vehicle's windows depending on the difference between the temperatu...

<Overview> Please collect product information on cars that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology is a technology to automatically control the opening of car window. If the car window is wide open when driving in an area with a lot of fallen leaves, there is a possibility that the fallen leaves will get into the car. To solve these challenges, this technology automatically reduces the opening degree of the car window if the climate in the area where the car is driving is such that leaf litter occurs. <<NOTICE>> The target car brands in this search are limited to US, European, Chinese, and South Korean brands. <Requirements for Payment> ・Submit documenta...

There is no mechanical work to be done on that project, but the city of Denver requires "As built" drawings: - Need As-built Mechanical Plans prepared by a licensed professional requires verifiable digital signature "Admin Use Only IC01" -We have adopted a new code. Please make sure your drawings have been designed per the 2021 IECC 2022 DCBA - 2023 NEC – 2022 Energy Compliance-2022 Denver Building and Fire Code (DBC or DBCA).

Faire le travail suivant, tout est expliqué dans le doc. Vous pouvez le faire dans la langue de votre choix je me charger de la traduction moi meme

<Technology Description> **See attached image for contest details** __________________________________________________________________________ <Overview> Please collect product information on vehicles or service information that have or will have the technologies described in the “Technology Description” section below. <<NOTICE>> The target car brands in this search are limited to US, European, Chinese and South Korean brands. <Requirements for Payment> ・Submit documentary evidence that clearly states the details of the subject product, the name of the company selling the product, and the company that plans to sell the product. Documentary evidence includes websites, YouTube videos, repair manuals, photos of the actual product, vehicle owner...

The project is hard to explain but mathematicians and computers researchers can easily understand the task. The final goal will be to locate light probes (or tetrahedrons) in a 3D scene to generate indirect illumination. The problem with our current implementation is that the the full convex hull may produce not enough light probes because of merging multiples convex hulls agorithm made by our ingeneers. I must notice that there are 2 algorithms for location generation : one is by light probes, the other is by using light propagation volumes for very close meshes. We previously tried to solve this problem by using 5D or 4D convex hull and test with matlab and we also tried to solve this problem by using multiple types of convex hulls types but, now, we encounter hesitation. The source code...

I am looking for a skilled freelancer to help me create a Gerber file for an ASIC miner board with customizable mining capabilities. The board should be able to mine Bitcoin using common software. Skills and experience required: - Strong knowledge of ASIC miner board design and development - Expertise in creating Gerber files for electronic circuit boards - Familiarity with Bitcoin mining and common mining software - Ability to customize mining capabilities based on specific requirements The project has a specific deadline of one week, so the freelancer should be able to complete the task within this timeframe. The ASIC miner board should have general software compatibility, meaning it can work with a variety of software options. If you have the necessary skills and experience, please ...

Budu prodavat obleceni. Chci mi velkej obchod, kterej bude znamej

I am looking for a freelancer who can help me with my project. I have a digital image file of a design that I would like to have drawn on SolidWorks as different parts in an assembly. The final design should be in the .SLDASM file format for SolidWorks. Skills and experience required for this job include: - Proficiency in SolidWorks software - Ability to accurately convert a digital image file into a SolidWorks assembly - Understanding of assembly design and part modeling The measurements for the different parts of the assembly are not specific, as long as the final design looks like the drawing. However, having precise measurements would be a plus. If you have the necessary skills and experience, I would love to hear from you. Please include examples of similar projects you have comp...

Chemical Engineering Expert Needed for Detailed Analysis and Recommendations in Reaction Engineering I am seeking a highly skilled and experienced chemical engineering expert to provide a detailed analysis and recommendations for a real-world application in the field of reaction engineering. Specific Requirements: - Expertise in reaction engineering and its application in real-world scenarios - Ability to conduct a detailed analysis of the project's requirements and provide recommendations for improvement - Strong knowledge of chemical reactions, kinetics, and reaction mechanisms - Experience in designing and optimizing chemical reactions for industrial applications - Proficiency in utilizing software tools and simulations for analyzing reaction systems Project Deliverables: - Det...

Project Title: Free surface Simulation Description: This project requires a freelancer with expertise in fluid flow simulations using SolidWorks. The ideal candidate should have experience in conducting research simulations. Requirements: - Proficiency in fluid flow simulations using SolidWorks - Strong understanding of free surface simulations - Ability to conduct thorough research and analyze simulation results - Familiarity with relevant mathematical models and equations - Excellent problem-solving skills and attention to detail Skills and Experience: - SolidWorks - Fluid flow simulations - Research methodology and analysis The main goal of this project is to conduct research through a fluid flow simulation using SolidWorks. The freelancer will be responsible for setting up and runn...

Project Title: SSO Configuration for Web Application Description: I am seeking a skilled freelancer to assist me in configuring Single Sign-On (SSO) for a web application. The primary goal of this project is to streamline access management for users.

Project Title: Drafting Specialists, Inventor I am looking for a mechanical and structural drafting specialist with experience in using Inventor for my project. Skills and Experience: - Proficiency in mechanical and structural drafting, - Strong experience in using Inventor software - Ability to create accurate and detailed technical drawings - Knowledge of industry standards and best practices in mechanical drafting - Strong problem-solving and analytical skills to convert conceptual ideas into technical drawings Ideal Freelancer: - Experienced mechanical drafters with a proven track record in using Inventor - Attention to detail and ability to work accurately and efficiently - Excellent communication skills to understand project requirements and provide regular updates - Ability to ...

Hybrid renewable energy integration

I am looking for a skilled professional who can design and create manufacturing drawings for various capacities of a Nitrogen Gas Plant. The project requires expertise in design calculations and the ability to work with small to medium range capacities. Specific requirements for the design are not provided, so the freelancer should be open to suggestions and able to offer creative design options. There are no specific industry standards or regulations that need to be adhered to for this project. Ideal skills and experience for this job include: - Proficiency in designing and creating manufacturing drawings for Nitrogen Gas Plants - Strong understanding of design calculations for small to medium range capacities - Ability to offer creative design options and work collaboratively with ...

As a production and sales company, our machines are exported to 170+ countries and we are looking for experienced after-sales service technicians to work with us on the maintenance of our machines. Requirements: Experience in the operation and maintenance of CNC machine tools; Proficient in CNC programming and operating skills, able to troubleshoot and repair machines and equipment Good teamwork and communication skills, strong sense of responsibility, meticulous work Possess good problem analysis and solving ability, able to complete the work task independently.

Mechanical Engineer - HVAC, Automotive, or Structural Design Projects - Seeking a skilled mechanical engineer with expertise in HVAC, automotive, or structural design - Specific area of mechanical engineering will be determined based on the project requirements - Open to suggestions and specific requirements from the client - Project completion timeframe is flexible, depending on the complexity and scope of the project - Ideal candidate will have experience in the chosen area of mechanical engineering - Strong problem-solving and analytical skills required - Ability to work independently and meet project deadlines - Proficient in relevant software and tools for design and analysis - Excellent communication skills to collaborate with the client and team members - Attention to detail and ac...

Assembler Project for 80C552 Microcontroller Task: Sensor Interfacing - Our project requires the development of an assembler program for the 80C552 microcontroller to interface with sensors. - The main task of the program will be to collect data from the sensors and process it accordingly. - We have already selected the sensors and they are ready for use. - The assembler program should be able to communicate with the sensors and retrieve data from them. - The program should also be able to process the data and perform any necessary calculations or actions based on the sensor readings. - We have a specific timeline for this project and it needs to be completed within 1 month. - The ideal freelancer for this project should have experience in programming with assembly language and working w...

We are seeking a computer vision engineer with expertise in hair diameter recognition to assist us in developing a system that can accurately measure hair diameter in images. The successful candidate will be responsible for implementing and optimizing computer vision algorithms to detect and measure the diameter of hair strands. Strong knowledge and experience in the field of computer vision, image processing, and machine learning is required. The engineer should also have expertise in one or more of the following areas: image segmentation, feature extraction, object detection, and deep learning. Attention to detail, ability to work independently, and strong problem-solving skills are essential for this project.

Mechanical Engineer I am looking for a skilled mechanical engineer to assist me with a specific area of mechanical engineering. Skills and Experience: - Expertise in HVAC systems, structural analysis, and fluid dynamics - Strong understanding of mechanical engineering principles and concepts - Proficiency in relevant software and tools - Excellent problem-solving and analytical skills Timeline: - The timeline for completing the project will be discussed and agreed upon with the selected freelancer. Budget: - The budget for this project will be determined based on the complexity and scope of the work.

I am looking for a freelancer who can assist with implementing CAN communication between an IoT device, a BMS (Battery Management System), and a controller. CAN Communication Protocol: - The project requires expertise in implementing CAN 2.0B protocol. IoT Device: - I have a specific IoT device that needs to be integrated into the system. BMS Functionality: - The primary function of the BMS is battery monitoring. Skills and Experience: - Experience in CAN communication protocols, specifically CAN 2.0B, is required. - Knowledge of IoT device integration is necessary. - Familiarity with BMS functionality and battery monitoring is preferred. If you have the required skills and experience, please submit your proposal for further discussion.

<Overview> Please collect product information on vehicles or service information that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology is related to vehicle agents. A vehicle agent is a virtual partner that can talk to, teach, and help the people who ride in a car. It uses the screen, speaker, and other devices in the car to show the voice, face, and movement of the agent. For example, the agent can tell them about the weather or news of a destination. In this search, we are looking for something that can detect the direction of the gaze of the person in the car and adjust the content and timing of the agent's conversation. For example, when the driver is not looking ahead, t...

<Overview> Please collect product information on vehicles or service information that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology improves safety by restricting the function of starting the engine of a vehicle by remote control. One of the problems that users face when starting a vehicle engine remotely is that the vehicle may start unexpectedly when the engine is started. For example, if a vehicle is parked with the parking brake inoperative, the vehicle may move out of its parked position when the engine is started. Since the user is at a distance from the vehicle, the user may be unaware of the vehicle's movement, potentially compromising the safety of the surrounding a...