Structural engineer can työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    8,245 structural engineer can työtä löytyi, hinnoittelu EUR

    Work with me to zone and design a race course in Pattaya Thailand. Complete full conceptual 3d walkthrough for the site includ...layout, site and floor plans, 3d walkthrough Artist impressions. The project must be to scale but the drawings don't need to be architecturally accurate i.e. I don't need structural engineering drawings showing steels etc.

    €1960 (Avg Bid)
    €1960 Keskimäär. tarjous
    15 tarjoukset

    Work with me to zone and design a race course in Pattaya Thailand. Complete full conceptual 3d walkthrough for the site includ...layout, site and floor plans, 3d walkthrough Artist impressions. The project must be to scale but the drawings don't need to be architecturally accurate i.e. I don't need structural engineering drawings showing steels etc.

    €2069 (Avg Bid)
    €2069 Keskimäär. tarjous
    34 tarjoukset

    Building a service targeting AEC professionals (structural engineers, architects, etc) where traditional and common design tasks that are typically carried out in a parsed manner can be put out for a fixed price or to bid. Engineers or architects can bid on the job. Service matches skills, licensing requirements, with short-term tasks or projects

    €26356 (Avg Bid)
    €26356 Keskimäär. tarjous
    83 tarjoukset

    I have a 800 sqmter plot in sector-67 of noida and looking for a person for its structural design

    €305 (Avg Bid)
    €305 Keskimäär. tarjous
    6 tarjoukset

    I need someone to make a report about our project, its a Dremel tool like the one in this link. [kirjaudu nähdäksesi URL:n]

    €108 (Avg Bid)
    €108 Keskimäär. tarjous
    20 tarjoukset

    ...tone of voice for a pitch video that will be displayed to investors all over the world. P.S. You don't have to read the bullets (numbers), they are in the script just for structural reasons. I'll attach the script below! Kind regards, Luka ...

    €31 (Avg Bid)
    €31 Keskimäär. tarjous
    1 tarjoukset

    Plot size: ~2100 sq ft, Expecte...views of the building (sketch up generated views) 4- All required Structural details. • Foundation and footing drawing. • Plinth beam drawing • Sump drawing • Staircase drawing • Columns details and beam details for each floor. • Water tank details. • Any architectural feature – structural details.

    €588 (Avg Bid)
    €588 Keskimäär. tarjous
    28 tarjoukset

    We inherited a church bell and stand for king of Glor . Now we need a structural engineer to figure out what kind of base is needed to support it.

    €273 (Avg Bid)
    €273 Keskimäär. tarjous
    5 tarjoukset
    Structural Steel Logo 4 päivää left

    I was looking to update our current logo and came across an example on your website. It looks like it was a submission for a contest entry. [kirjaudu nähdäksesi URL:n] Thanks, Mark

    €39 (Avg Bid)
    €39 Keskimäär. tarjous
    78 tarjoukset

    I have 7 sets of drawings for Portable Power Distribution Panels that need to be reviewed and stamped by a licensed PE in Ontario Canada. These consist of Mechanical/Structural drawings and electrical drawings.

    €3342 (Avg Bid)
    €3342 Keskimäär. tarjous
    3 tarjoukset

    Structural engineering and engineering supervision required for a house construction in Mavelikara, Alleppey Dist. Kerala, India

    €93 (Avg Bid)
    €93 Keskimäär. tarjous
    18 tarjoukset
    Fairplaycabin 2 päivää left

    ...square foot single level, the dementioned hand drawings already done on Mayline board, want hand drawings converted to AutoCAD. will then submit AutoCAD drawings to local structural engineer for review and stamping. Drawings required but not limited to the following: Foundation plan First floor framing plan Floor plan Four elevations Building sections and

    €819 (Avg Bid)
    €819 Keskimäär. tarjous
    36 tarjoukset

    ...important than job completion and he did not complete the project fully. My website [kirjaudu nähdäksesi URL:n] Has been around along time but its been through many structural changes. Nearly two years ago I installed a new template and it was AMP friendly. Now it is not. If you check the pages on the main menu/sub and footer menu, there is not

    €583 (Avg Bid)
    €583 Keskimäär. tarjous
    13 tarjoukset
    3d modelling 18 tuntia left

    make sheet drawing and model 3d equipment and structural detail

    €10 / hr (Avg Bid)
    €10 / hr Keskimäär. tarjous
    26 tarjoukset

    Looking for an engineer with experience in skating and structural metal design work to help designing a framework for a new skate structure. This engineer is living in Europe preferably in Holland, Germany or Belgium.

    €161 (Avg Bid)
    €161 Keskimäär. tarjous
    17 tarjoukset
    Trophy icon Design me a Stackable Chicken Coop 10 tuntia left

    Clarifications - "Stackable means that they nest into each other like buckets - not stackable like bricks" I am looking for a design for a stackable chicken coop so that it can be fully manufactured and assembled in the factory and then freighted out to wholesalers stacked on top of each other. Design parameters - 1. The maximum length x depth

    €280 (Avg Bid)
    Mainostettu Taattu Sinetöity
    €280
    13 työtä

    We are a steel fabrication company...are a steel fabrication company, currently have a job. There is structural steel frame on the roof. We need the 3D model for our client review. And also need the detail drawings, single part drawing, bolt list, material list for our fabrication. Please see the attached drawing. If you can do it please let me know.

    €1827 (Avg Bid)
    €1827 Keskimäär. tarjous
    17 tarjoukset
    Scientific Research Loppunut left

    I am lookin...looking for a scientific researcher in the field of Civil/Geo technical Engineering to assist with my project topic . You should have a great knowledge of Russian Language Structural Mechanics and Analysis and also Soil Mechanics . Should be skilled in Scad,Lira or GTS midas. Should be able to complete research work at a specified time.

    €379 (Avg Bid)
    €379 Keskimäär. tarjous
    11 tarjoukset

    ...am currently a Structural Engineer transitioning to Real Estate Development in the United States. Our firm will focus primarily in the Multifamily, Mixed Use sectors. We will be doing acquisitions of existing buildings and ground-up development as well. I'm looking at a plethora of sites around Boston and need a BIM/CAD Designer who can do 3D renderings

    €226 (Avg Bid)
    €226 Keskimäär. tarjous
    57 tarjoukset

    need to be able to work in AutoCad and various systems, We design gas pipelines

    €22 - €44 / hr
    Paikallinen
    €22 - €44 / hr
    0 tarjoukset
    Field Engineer Loppunut left

    I want a Network Field engineers in USA and UK , Engineer Who has a working knowledge on cisco routers and switches ,Juniper Routers and switches how to connect a console to our laptop and give a remote access to backend team via webex or team viewe

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    2 tarjoukset
    Steel project Loppunut left

    Analysis and design main structural system of industrial building First and second request was finsh

    €124 (Avg Bid)
    €124 Keskimäär. tarjous
    12 tarjoukset
    Project for Alden P. 17 tuntia left

    I am structural draughtsman I have 5 experience in construction field.

    €1 / hr (Avg Bid)
    €1 / hr Keskimäär. tarjous
    1 tarjoukset

    I am looking for an assistant / trainee to produce structural frame drawings in sketchup and AutoCAD along with the use of takeoff software suites. Client drawings Site frame construction drawings Component Design Manufacturing Drawings / Information Joint Detailing Able to produce material takeoffs using relevant software suites. Able to provide

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    25 tarjoukset

    ...them apart from woo’s own, or woo membership 2. My company is looking to offer structural steel companies the ability to sell their products as well as our standard products that are loaded. 3. A manual set up of the product category of the supplier is done a. The supplier can add his own products to that category and no other b. The supplier has full

    €586 (Avg Bid)
    €586 Keskimäär. tarjous
    66 tarjoukset
    structural drawing Loppunut left

    Needed are building plans for the addition of second level to an existing to a home

    €362 (Avg Bid)
    €362 Keskimäär. tarjous
    53 tarjoukset

    AM Noise in AM PCM and Time Division Multiplexing (TDM) PAM and Time Division Multiplexing (TDM) Phase division modulation and demodulation

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    6 tarjoukset
    Structural engineer Loppunut left

    Domestic side return kitchen extension and minor internal alterations to Victorian terraced house in Knowle Bristol. We require structural design input to develop the design.

    €2002 (Avg Bid)
    €2002 Keskimäär. tarjous
    22 tarjoukset

    Hi Pronaya, we are launching a website under Wordpress (Genesis) and would like to implement structural improvements in speed and technical SEO. We are looking for a partner to audit our site, and make/implement recommendations. A lot of the site was handcoded, so we are somewhat advanced (use W3TC with Cloudflare) but we would like code suggestions

    €34 / hr (Avg Bid)
    €34 / hr Keskimäär. tarjous
    1 tarjoukset

    Geotechnical Engineering Spread Sheet: for the following: *Bearing ca...*Free head and Fixed Head *SPT to all kind of relationships, e.g cpt, max dry density, submerged density (as much as possible) Please note that this is Geotechnical and no structural information is available. Graphical representation would be good showing distribution to depth.

    €155 (Avg Bid)
    €155 Keskimäär. tarjous
    12 tarjoukset

    I have a round shaft ...and radial) applied near the centre, so it simulates the type of loading you would see in the assembly picture. I need a quad mesh and a convergence of less than 2%. If you can do this for me I have some other ANSYS work also available (please be aware that this is not an entry level project and requires ADVANCED ANSYS skills).

    €64 (Avg Bid)
    €64 Keskimäär. tarjous
    4 tarjoukset

    Memoir needs structural edit. 70,000 words. Needs restructuring, particularly first chapter. Based on young woman's childhood, coming of age and early travels. Looking for editor with experience of similar content.

    €904 (Avg Bid)
    €904 Keskimäär. tarjous
    54 tarjoukset

    I have designed a lightweight modular wood building. I'm curious about the possibility of using the same structural design but with reinforced moulded concrete instead of wood. As such I'm looking for some with both technical experience in calculating strengths for concrete and practical experience to advise regards the outsourcing such manufacturing

    €27 / hr (Avg Bid)
    €27 / hr Keskimäär. tarjous
    33 tarjoukset

    Hi there Dia. I’m andrew and I’m a structural engineer. I’m wanting to know if you have experience with civil design for residential to light commercial ?

    €26 / hr (Avg Bid)
    €26 / hr Keskimäär. tarjous
    1 tarjoukset

    ...use, how to create a nice flow throughout the whitepaper, what to avoid, etc. (10-15 pages) In addition to the guide, I'd like to have a 'template' added, which can be used as a structural guide for people who want to write their own whitepaper. Please reference your past experience in this particular niche, and share your thoughts on what might need

    €400 (Avg Bid)
    €400 Keskimäär. tarjous
    19 tarjoukset

    I am in the initial process of planning my house build. The house will be supported on pillars. House requirements: 1] 250m/squared 2] Floors/levels 3] Mostly glass all round 4] house needs to be supported on pillars I will require a steel frame construction drawing of the house which specifies: material, weight and thickness of beams used. The drawings required need to be presented in CAD to si...

    €430 (Avg Bid)
    €430 Keskimäär. tarjous
    61 tarjoukset

    Cell has a requirement for detailed structural designs for a new 33kV skid mounted substation. Attached with this submission is a brief scope of work but essentially: 1. Complete structural designs for three new skid mounted substation (mostly identical) 2. Source or create accurate GA drawings of the components used (some of which have been supplied

    €551 (Avg Bid)
    €551 Keskimäär. tarjous
    29 tarjoukset
    House plan Loppunut left

    I have a house plan layout almost finalized to complete in pala, kottayam, kerala. I need an licensed Architect and structural engineer to complete my project.

    €144 (Avg Bid)
    €144 Keskimäär. tarjous
    29 tarjoukset
    Trophy icon Design an Investment Flyer Loppunut left

    ...The 2016 Census identified about 9,205,000 existing housing units that were in need of major work. The list included such things as defective plumbing or electrical wiring, structural repairs to walls, floors and ceilings. -Become a partner in a new revolutionary startup -Offering 15% Class A shares for $500,000 -Invest in the future and help us change

    €32 (Avg Bid)
    €32
    23 työtä
    Design a Flyer Loppunut left

    ...The 2016 Census identified about 9,205,000 existing housing units that were in need of major work. The list included such things as defective plumbing or electrical wiring, structural repairs to walls, floors and ceilings. -Become a partner in a new revolutionary startup -Offering 15% Class A shares for $500,000 -Invest in the future and help us

    €64 (Avg Bid)
    €64 Keskimäär. tarjous
    78 tarjoukset

    Structural design of steel building needed

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    43 tarjoukset

    need structural design of concrete structure as per australian code

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    24 tarjoukset

    I will provide .ifc file which needs to be checked for accuracy and using which detailed drawings has to be prepared. Preferred software is Tekla Structural Steel.

    €391 (Avg Bid)
    €391 Keskimäär. tarjous
    17 tarjoukset

    I need a factory designed,Industrial factory building structural design 100mx25m

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    46 tarjoukset

    ...which is already made in STAAD PRO. Objective:- We required to conduct a small Research & development work to investigate that, If it is possible to reduce section sizes of structural members comprising the solar module mounting structure, with help of ANSYS software ? The solar module mounting structure is originally made in STAAD PRO software. Purpose:-

    €356 (Avg Bid)
    €356 Keskimäär. tarjous
    4 tarjoukset

    Hi, Looking for a structural engineer to provide structural drawings and calculations for a 2 storey shipping container building Must be familiar with IBC and CA current codes. the right candidate should provide a similar project or references. Regards, Sam

    €152 (Avg Bid)
    €152 Keskimäär. tarjous
    25 tarjoukset

    A service to be carried out on a Ricoh Aficio 220 photocopier. Not been done for a while.

    €23 - €284
    €23 - €284
    0 tarjoukset

    We need some one good in structural designing

    €18 / hr (Avg Bid)
    €18 / hr Keskimäär. tarjous
    31 tarjoukset