Embedded Hardware and Software Engineer

Hi! I have understood your requirements about your project with every detail of it. I am an Electrical Engineer with more than 9 years of experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embedded systems, microcontrollers, Proteus, Arduino, ESP32, Raspberry pi, NB-IoT, MATLAB, PLC Design, Algorithm, and Product design. I can assure satisfactory work. I'll be glad to work with you. Thanks

Hello I am Electrical Engineer and a professional PCB designer, I can do your task quite efficiently. I have 5 years of experience designing boards that involves FPGA’s, spi, i2c, stm, nrf, antenna etc. Check my profile and inbox me to discuss it more. I am a verified and preferred freelancer in the field of PCB designing. Thanks

Hi there I'm an Electronic Engineer with over 6 years experience designing embedded applications and PCBs. I also have C and C++ certifications here on freelancer. How about a private message so we can discuss the details of your project Kind regards V.T.

Good day, I can design provide electronic Circuit Design with Altium using GSM Module and ESP32 you in a quality and timely manner. I have 30 years of experience in Embedded Hardware and Software Design and I am the best fit for your project requirements. I have seen the attached image you shared and I will do this project quickly. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, LoraAltium, GSM Module, ESP32, EC200U Mini PCIE, Guson GM196 Mini PCIE etc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you Regards Hari Mohan

I am a professional PCB design engineer i have expertise in PCB and circuit design for industrial level products. I can help you to reduce the cost of the board, dealing with industrial level-based PCB and circuit to make it cost effective and design improved is my daily routine. I have more than 4 years of experience as hardware design engineer. I am working as hardware design engineer in a reputed firm based in Germany, where my job is to analyze the working of electronic circuit and bring new improved design for our costumer. I understood the project description i can deliver your task as per your requirements at a reasonable budget. Your satisfaction will be my priority, you can trust on me. I am sure you will consider me for this task when you take a look to my portfolio. Looking forward to your earliest response. Best Regards Muhammad Adeel

OE; Firstly, I express my deepest condolences to the victims of the earthquake in Turkey. As an experienced electronic circuit designer and software developer, I would like to offer my skills to help with your project. I am proficient in using Altium Designer for circuit design and have extensive knowledge of Quectel EC200U Mini PCIE and Guson GM196 Mini PCIE as GSM modules, as well as Nuvoton and ESP as processors. With my expertise in software development, I can create a telemetry circuit that communicates through UART and MDB protocol and can be updated remotely using MQTT protocol over the GSM module. I am confident that I can complete the project within 15-20 days after starting work, as I have done similar projects in the past. I understand the importance of the project and can assure you of my professionalism and commitment to delivering quality work. I am excited about the opportunity to work with you and believe that my skills and experience make me a great fit for the job. I would be grateful for the chance to discuss the project further and provide you with a detailed proposal. Please do not hesitate to contact me for more information. Thank you for considering my application, and I look forward to hearing from you soon. - Abbas

OE I am professional in the field of embedded IoT software engineering, I have the expertise required to handle any project related to this domain. With extensive experience in working with both the ESP32 board and Quectel technology, I am confident in my ability to take your project from conception to successful deployment. I would be grateful for the opportunity to bring my skills and expertise to your project. Thank you for considering me.

HELLO!!! I CAN DO THIS PROJECT Professionally, Electronic Circuit Design and software will be purchased. Altium designer will be used for circuit design. Quectel EC200U Mini PCIE or Guson GM196 Mini PCIE will be used as GSM Module. Nuvoton or ESP will be used as the processor. With the software to be developed on the processor, MQTT protocol will be used over the GSM Module, a telemetry circuit that can communicate with UART and MDB protocol and which can be updated remotely will be made. We expect the project to be completed within 15-20 days after the start of work.

HI. I am good at embedded firmware programming and can help you. Hope more discuss with you about your project details. Regards.

Hello there, I am a MEng. Electrical and Electronic Engineering (Electronic) graduate from the University of the West of England in 2019 and I have 3 years of experience as a Product development engineer in LE Robotics Pvt. Ltd., Sri Lanka. I have developed complete design of servo motor controller including the optimal servo motor design according to the company requirement, Controller PCB design including CAN, Power PCB design for Low power (48V DC) as well as High Power (230V AC), HMI, Absolute, Incremental, Multi-Turn Absolute encoder designs and Firmware for the system. Apart from that, I have experience in biomedical sensor development (EMG sensors, ECG sensors etc.), Power electronic designs (Switch mode power supplies, converters etc.) and many more. You can have a look at a sample in my profile portfolio. I have actively started freelancing recently. As a beginner, I am trying to build my reputation as a freelancer. Your task can be completed within the time limit with high efficiency if you hire me for the job. I can guarantee you a quality and ethical work from my side. I think I am a good fit for your job and waiting for your response. Best Regards Aloka Perera

NOTE: Before continuing with the order, please Ready about myself and my work ability. My name is Abdul and I am an expert PCB designer with 17+ years of experience. I have Done many projects for Xilinks, AMD, Advancetest, Intel, Innowi, Huawei, Cisco, Keysight, Alef, Samsung, Nebulon, Nvidia, Amazon, Airspan, Flexlogic and many others companies from USA and all our the world. WHY should we work together? We are a team of PCB designers and electronics engineers. we are Passionate and specialize in creating a circuit diagram or schematic, PCB design, or Layout in multilayers, 3D views, and 3d enclosures. Proficient in PCB Software like OrCAD Cadence Allegro, Altium Designer, PADS. You will get a professional PCB (printed circuit board) or PCB Layout for your professional product, (DIY) Project, or PCB you need & perfect fit for you. Your ideas and sketch or any information you'll share shall be highly confidential. An (NDA) shall always be between us. Just send your schematic diagram, and write down your idea or what you want. WHAT we can provide you with the following 1-Up to 6 Layer PCB 2-Gerber Files / Fabrication 3-PDFs and Images 4-BOM file with best price/quality parts including 5-manufacturer part numbers 6-3D in STEP or VRLM file format 7-Source files Price will be more negotiate like 400$, I just want make long relationship with my clients. If you have any questions, please ask. Thank you.

Hi there I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Embedded Hardware and Software Engineer plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

OE Hello Client, I am a senior hardware and software developer who has over 9 years of experience. I understand your job requirements clearly. I can finish your device and firmware perfectly. I can start right away. Looking forward to hearing from you, Regards

I am a highly experienced software developer with expertise in working with electronic circuits and microcontrollers. I understand the requirements of your project and am confident that I have the necessary skills and knowledge to deliver high-quality results within the given time frame. I have experience in developing applications using MQTT protocol and UART communication and have a solid understanding of the telemetry circuit. I am familiar with GSM modules like Quectel EC200U Mini PCIE and Guson GM196 Mini PCIE, and microcontrollers like Nuvoton and ESP. I have expertise in Altium Designer and can effectively use it for circuit design. I am committed to delivering high-quality work, and I am confident that I can exceed your expectations. If you are interested, I would be happy to discuss further details and start working on this project.

OE Hello, I've been working at Intel for 7 years at low-level SW and firmware development and validation. I had my hands on UART controller before and I also developed once a MQTT client service using paho lib. The scheme you draw in the picture makes sense to me. I would be glad to join the project. Thanks, Shandor

OE As a firmware developer with over 5 years of experience in embedded systems, electronics, and industrial automation, I have had the opportunity to work on diverse projects ranging from Electric Vehicles (EVs), Medical Devices, Board Support Packages (BSP), and Over the Air (OTA) support. I have a deep understanding of the intricacies involved in developing firmware for various applications, making me an expert in the field of firmware development. I can develop code in ESP IDF SDK for a freertos based memry optimized code for you in record time. I am new to this platform but let's connect and I will share my previous projects portfolios with you