Programming a microcontroller jobs

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    3,877 programming a microcontroller työtä löytyi, hinnoittelu EUR

    This is a three part project, so pay attention. Part 1: I have two items that, sometime soon, I would like to manufacture. The first item is a custom air-oil separator tank. (see .dwg file with all of the clear instructions in it for manufacture of each individual part.) The second item is a metal arm (that will eventually hold sensors on it). [[[(PAY

    €140 (Avg Bid)
    €140 Keskimäär. tarjous
    3 tarjoukset

    I need the code to realize an hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    €196 (Avg Bid)
    €196 Keskimäär. tarjous
    25 tarjoukset

    I need a programmer to write C code for an ATTiny10 microcontroller to flicker two LEDs in a random fashion that simulates a real-world candle flame. The code needs to treat each LED as its own "candle", so this is essentially two independent flickering routines. This is different from some implementations where one "candle" consists of two LEDs in...

    €126 (Avg Bid)
    €126 Keskimäär. tarjous
    8 tarjoukset

    A relay switching (around 100 relays) using microcontroller in a pre-definite sequence and corresponding displays etc.

    €140 (Avg Bid)
    €140 Keskimäär. tarjous
    35 tarjoukset
    VENDING TELEMETRY 1 day left
    VARMENNETTU

    A hardware module(Controller) needs to be created, which will consist of the following components: processor, internal memory, rechargeable battery with capacity 950-1100mA/h (to power the device when external supply is lost), power supply module, GSM module, SIM ВТ module that can connect to Smartphone or tablet , WiFi module for data share through

    €4975 (Avg Bid)
    €4975 Keskimäär. tarjous
    20 tarjoukset

    I need to get data from 4 to 20 ma sensors and process input data using a microcontroller. After processing the data, it will be transferred to the computer via the Rs-232 protocol.

    €126 (Avg Bid)
    €126 Keskimäär. tarjous
    25 tarjoukset

    IFGtech is a subsidiary of IFGworld ([login to view URL]) geared towards producing innovative technologies that are integrated into daily life. We are searching for an electrical engineer that has experience in: -Design of PCB boards -Printing of PCB boards and soldering of individual components -Design new EMG microcontroller in tandem with biomedical engineers

    €18 / hr (Avg Bid)
    €18 / hr Keskimäär. tarjous
    26 tarjoukset

    1. Identify a good value and properly sized CPLD/FPGA and toolset (toolset needs to be relatively easy to configure) to accommodate the required functionality. 2. Develop the CPLD/FPGA code. The device needs to take as inputs a set of states (from a microcontroller so either as an I2C command or as a 3 digital input code, along with 3 digital inputs

    €106 (Avg Bid)
    €106 Keskimäär. tarjous
    17 tarjoukset

    I have a simple device that I will need to control and monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or

    €160 (Avg Bid)
    €160 Keskimäär. tarjous
    33 tarjoukset

    I need to make the piezo counter display, 2 seven segments 1.8 in. t...seven segments 1.8 in. the piezo will send low voltage (1 to 5 Volt) to the microcontroller, according to of each puls the microcontroller is going to counting and display it, one reset button to reset the micro controller, I need use Arduino to program the microcontroller (Atmel).

    €103 (Avg Bid)
    €103 Keskimäär. tarjous
    37 tarjoukset

    I have a unusual ADC/DAC/GPIO hybrid device connected to a Microcontroller via SPI. I need a driver for the ADC & DAC as well as digital IO from the device

    €451 (Avg Bid)
    €451 Keskimäär. tarjous
    36 tarjoukset

    ...This should be a simple project but I realize that I am missing something that is not obvious to me. The attached zip file contains the Excel files as well as the htm files from the website where I found this calculation in Excel. Also the website URL. The Excel file contains a design equation allowing the output voltage adjustment for a DC/DC converter

    €152 (Avg Bid)
    €152 Keskimäär. tarjous
    25 tarjoukset

    Reading Futaba TX switches state via Dragonlink using Arduino, Skills: C Programming, Arduino, Embedded Sofware, Electronics, Microcontroller

    €93 (Avg Bid)
    €93 Keskimäär. tarjous
    8 tarjoukset

    I need you to develop some software for me. I would like this software to be developed using C in MPLAB X IDE for PIC32MX250F128B microcontroller

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    9 tarjoukset

    we are looking for candidates who have experience in microcontroller , PLC programming

    €3 / hr (Avg Bid)
    €3 / hr Keskimäär. tarjous
    4 tarjoukset

    A simple project to develop hardware & firmware for a triac based starting ramp controller. This project will provide basic hardware elements as a starting point. The Developer will have input into final hardware layout including the selection of Microcontroller to aid swift project completion. Project Condition 1. LOW COST/SIMPLE hardware requirement

    €226 (Avg Bid)
    €226 Keskimäär. tarjous
    27 tarjoukset

    Need remote control and remote HD video streaming over wifi from drone. Would like to use Arduino type microcontroller board and/or Single Board Computer to control drone motors and to capture HD video via mini-HDMI camera output and have a media server like VLC stream the hdmi input over Gigabit ethernet to wireless transceiver and finally to an 802

    €206 (Avg Bid)
    €206 Keskimäär. tarjous
    18 tarjoukset

    Need to port FreeRTOS for RH850/P1H-C Microcontroller. need some basic changes which will make the RTOS compatible with RH850. you do not need to write any drivers. you just need to make some changes specific to the microcontroller. let me know if any one is interested to work on this.

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    9 tarjoukset

    I recently developed a microcontroller-based lighting controller for an art project with a local artist. It controls 3 x 3-colour LED strips. I also wrote a PC program in JAVA to define how the lights change/fade over time. The PC program has a similar UI to Audacity in that there is a timeline to represent each of the channels (the LED strips).

    €1390 (Avg Bid)
    €1390 Keskimäär. tarjous
    22 tarjoukset

    .../ I need the patents filtered so that the specification includes microprocessor cpu microcontroller or "micro controller". Also the assignee name needs to match the inventor [login to view URL] the inventor country needs to be usa I need to be able to run the code myself on a weekly basis. The data is similar to xml but it is not exactly so excel will not import

    €335 (Avg Bid)
    €335 Keskimäär. tarjous
    9 tarjoukset

    ...computers originally built by Commodore. I have recreated the Amiga 500 keyboard and want to replace the old controller(Commodore CSG 6570-036 MCU with a newer PIC chip) using a PIC18F45K50T-I/PT microcontroller as a replacement and hopefully be able to incorporate the extra logic circuit into the new MCU. I have the original schematic and have created the new

    €73 (Avg Bid)
    €73 Keskimäär. tarjous
    7 tarjoukset

    ...XC8 compiler and MPLABX environment. This could be a port of the Arduino LCD library 'U8g2'. See ttps://[login to view URL] There are details on how to port to other microcontroller platforms. See [login to view URL] Or you could write a custom library, or port another open source library.

    €187 (Avg Bid)
    €187 Keskimäär. tarjous
    10 tarjoukset

    we need a code in C, it should be written in Keil compiler with STM32 microcontroller and CMSIS libraries. sample devices for this purpose are JUMO ITRON seies in industry.

    €1940 (Avg Bid)
    €1940 Keskimäär. tarjous
    31 tarjoukset

    ####Only experience programmer will be approved#### The board will be used in cars, has dual CAN interface, CAN1= connected to Car-CAN, CAN2= connected to ECU The main function of the board is the following: 1- Forward messages between CAN1 and CAN2 (normal mode). 2- Modify specific data in some messages going to CAN2 while pre-defined data received (filtering mode). 3- Fail-safe mechanism for bot...

    €156 (Avg Bid)
    €156 Keskimäär. tarjous
    16 tarjoukset

    ...Electronics Radio Circuits designing and Radio Frequency transmitters and receiver data communication experience required, preferably in Meteor burst technology. FPGA, Microcontroller interfacing, Motorola VHF transceiver experience preferred. The main Aim is Data communication through wireless communication link x.25. VHF Meteor burst transmitter &

    €4884 (Avg Bid)
    €4884 Keskimäär. tarjous
    11 tarjoukset

    I have a double layered PCB ( top and Bottom, no more layers )with mainly 1 ARM Microcontroller, one 24bit ADC and a communication chip on there. I need you to build the autodes eagle schematic file for me. I can not provide the pcb itself but detailed photos in high resolutions of both sides. I will deliver a sample photo upon request.

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    46 tarjoukset

    I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the

    €90 (Avg Bid)
    €90 Keskimäär. tarjous
    20 tarjoukset

    Hello freelancer I am looking for someone, in order to design a project by using Proteus to simulate PIC18F4550 USB-HID Device. in which the microcontroller generated "text or code" and then read this "text or code" by C# Form to show as a label.

    €35 (Avg Bid)
    €35 Keskimäär. tarjous
    13 tarjoukset

    ...patents and patent applications whose description includes microprocessor or microcontroller or cpu or both micro and controller. I want the code to search individual application or issue dates on a day by day basis. All patent information should be scrapped and put into a spreadsheet, database or cvs file. The code should use scrapinghub's cloud service

    €135 (Avg Bid)
    €135 Keskimäär. tarjous
    4 tarjoukset

    I need to get an image from any CIS sensor using a microcontroller and transfer the data to a computer and get a gray image.

    €274 (Avg Bid)
    €274 Keskimäär. tarjous
    20 tarjoukset

    ...Ultrasound Sensor, 1 Arduino board, and a battery that will measure liquid flow. Arduino board will receive two inputs (battery, ultrasound) and send two ouputs (LCD, Solenoid). All components will be provided. You will be designing those circuits and selecting a board that is electrically compatible and creating a schematic Coding for reading Ultrasound

    €1271 (Avg Bid)
    Paikallinen
    €1271 Keskimäär. tarjous
    2 tarjoukset

    We are a small company that works with weather monitoring, we have a whole hardware development team, but we want to outsource some specific jobs like this one: Develop a driver for the sensor BMP280 in Zephyr RTOS for an ARM microcontroller from the family nRF52

    €230 (Avg Bid)
    €230 Keskimäär. tarjous
    10 tarjoukset

    PIC32MX250F128B micro controller interacting with 430Boost CC110L radio module, Sending msg from one TX station and receive at RX station without data loss using microcontroller and radio module mention above. Also want to see output on USB to serial

    €378 (Avg Bid)
    €378 Keskimäär. tarjous
    5 tarjoukset

    Development of a mecha-tronic product (houshold applicance) Tasks - CAD modeling / optimization - Prototyping - Microcontroller programming

    €14 / hr (Avg Bid)
    €14 / hr Keskimäär. tarjous
    38 tarjoukset

    we have ST based microcontroller and we want a developer to develop a USB host for this

    €153 (Avg Bid)
    €153 Keskimäär. tarjous
    6 tarjoukset

    I want to measure the temperature of the liquid in the vials. I am planning to use the...temperature of the liquid in the vials. I am planning to use thermosensor which would be connected to the microcontroller and then need to do programming. Is there anyone who can help me to set up this assembly and help me to do programming of the microcontroller?

    €138 (Avg Bid)
    €138 Keskimäär. tarjous
    13 tarjoukset

    I need to program a panel of leds built with an STM32F103 microcontroller and SPI drivers for led. when receiving commands through the serial interface or can write to the LEDs. Please read [login to view URL]

    €127 (Avg Bid)
    €127 Keskimäär. tarjous
    3 tarjoukset

    Project on ir sensor with microcontroller using embedded coding with spectials Dead line on 20 August 2018

    €141 (Avg Bid)
    €141 Keskimäär. tarjous
    1 tarjoukset

    I need to program a panel of leds built with an STM32F103 microcontroller and SPI drivers for led. when receiving commands through the serial interface or can write to the LEDs. Please read [login to view URL]

    €84 (Avg Bid)
    €84 Keskimäär. tarjous
    19 tarjoukset

    Develop a Fan and Light Dimmer Module using PIC 18F2550 or any other PIC Micro, controller. Show a working prototype with any of the PIC microcontroller and level of dimming should be 20, 40, 60, 80, 100 %. Default Code and Schematic have been attached.

    €86 (Avg Bid)
    €86 Keskimäär. tarjous
    26 tarjoukset

    ...received data. The possible cause of this issue is in a PHY receiver – pre FIFO – RS decoder – post FIFO setup, the PHY receiver was originally checking post FIFO empty signal in previously working projects, then is modified to check the pre FIFO instead. Bugs are created in this modification. Therefore, a workaround would be to switch back to check post

    €3773 (Avg Bid)
    €3773 Keskimäär. tarjous
    27 tarjoukset

    The main goal is to write a program for a ST32 mc that drives a stepper motor driver. (STEP-DIR) The hardware has a touch screen that requires menu system where user can set various settings. Although we already built the hardware but it needs to be changed as we want it to be able to save and store profile settings. Currently we don't have memory

    €1196 (Avg Bid)
    €1196 Keskimäär. tarjous
    38 tarjoukset

    Microcontroller programming required for MPPT. Must have prior experience with microcontrollers.

    €137 (Avg Bid)
    €137 Keskimäär. tarjous
    22 tarjoukset

    I needed hardware and software based on High speed microcontroller for 16 bit audio file player

    €1190 (Avg Bid)
    €1190 Keskimäär. tarjous
    9 tarjoukset

    Hi , I am working on a Project to build a machine with Software ( C#,Microcontrollers..) for Printing Data on PVC Card Printer with different Methodes like ( MagStripe Coding-Encoding, Chip Coding contactless/contactbased. ...Printing on Thermotransfer, Mechanical Embossing) Details of the Project will be shared after we agreed . BR TG

    €2835 (Avg Bid)
    €2835 Keskimäär. tarjous
    26 tarjoukset

    I am working on a datalogger project and need someone to develop a professional solution. However there are currently still several hardware options open, So first stage of project is to narrow down hardware options and refine the specifications. Basic functional specification: - 4 channel 24bit 1kSPS per channel low cost, ultra low power datalogger

    €7 / hr (Avg Bid)
    €7 / hr Keskimäär. tarjous
    1 tarjoukset

    I need you to develop some software for [login to view URL] is dancing LED patterb [login to view URL] details will be provided during chat.

    €3 / hr (Avg Bid)
    €3 / hr Keskimäär. tarjous
    13 tarjoukset

    Looking for detail design , manufacturing BOM, complete software files for Annunciator. Channel count 24 Channel, Communication - Modbus RS485.

    €82 (Avg Bid)
    €82 Keskimäär. tarjous
    5 tarjoukset

    ...project aims to develop a smart irrigation system that automatically controls the flow of water, taking the state of the soils moisture level and temperature into consideration. Traditional irrigation systems may cause either over or under-watering, both of which are harmful to plants and may cause plant death. Also, overwatering is a waste of water. The

    €223 (Avg Bid)
    €223 Keskimäär. tarjous
    27 tarjoukset

    This is about creating a demo which connects ESP32 micro-controller to Bluetooth speaker or hands free. In this case the ESP32 micro-controller will connect to the bluetooth speaker and stream audio. The audio can be streamed via wifi or from audio stored on the ESP32. The source code must utilise Free RTOS. Successful freelancer will get US$300 for

    €135 (Avg Bid)
    €135 Keskimäär. tarjous
    5 tarjoukset