Mechanical cad drawings samples työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    13,042 mechanical cad drawings samples työtä löytyi, hinnoittelu EUR

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    €137 (Avg Bid)
    €137 Keskimäär. tarjous
    18 tarjoukset

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    €144 (Avg Bid)
    €144 Keskimäär. tarjous
    19 tarjoukset
    CAD Drawings (House Elevations) 6 päivää left
    VARMENNETTU

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    28 tarjoukset
    Construction Drawings 6 päivää left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    27 tarjoukset
    patent drawings 6 päivää left
    VARMENNETTU

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    14 tarjoukset
    AutoCad drawings 6 päivää left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    55 tarjoukset

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    €7 / hr (Avg Bid)
    €7 / hr Keskimäär. tarjous
    6 tarjoukset
    Contsruction Drawings 6 päivää left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €293 (Avg Bid)
    €293 Keskimäär. tarjous
    47 tarjoukset
    CAD drawings 6 päivää left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    11 tarjoukset
    Trophy icon CAD drawings 6 päivää left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €56 (Avg Bid)
    €56
    6 työtä

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    €27 (Avg Bid)
    €27 Keskimäär. tarjous
    28 tarjoukset

    Native English Writer Needed for long term writing jobs. I'll pay 1.25-1.35 AUD per 100 words. Newbies are also welcome but must show samples. Non-natives please don't apply. Your bid will be reported.

    €64 (Avg Bid)
    €64 Keskimäär. tarjous
    32 tarjoukset

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    €127 (Avg Bid)
    €127 Keskimäär. tarjous
    59 tarjoukset

    In need of a versatile script writer

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    5 tarjoukset

    We are a Electrical Control Panel Manufacturer in Noida. We design, manufacture and commission ACDB, PLC panels. We have been in business since 2014. We are a professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years....

    €18 (Avg Bid)
    Paikallinen
    €18 Keskimäär. tarjous
    3 tarjoukset
    Samples of Article 5 päivää left

    I need someone to submit some articles for me.

    €3 / hr (Avg Bid)
    €3 / hr Keskimäär. tarjous
    26 tarjoukset
    3D component drawings 5 päivää left

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    €244 (Avg Bid)
    €244 Keskimäär. tarjous
    95 tarjoukset

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    €34 (Avg Bid)
    €34 Keskimäär. tarjous
    37 tarjoukset

    I need to capture vibrational data from a system consists of Ball bearing, shaft, weights, bearing housing and pulley. The 3D model is ready (Solidworks-2018, STEP, IGS, X_T ant others format as need). only need simulation. It will not take more than 2 hours as design is ready.

    €75 (Avg Bid)
    €75 Keskimäär. tarjous
    11 tarjoukset

    I need a heating element to heat food (vegetables, rice, meat, anything homemade) from 20 to 75 degrees Celsius in less than 20 minutes, contained in a...bank or similar). I need the full detailed specifications on the materials for all parts, connectivity, materials, heating elements, battery, thermostat and timer. High-level CAD design is available.

    €136 (Avg Bid)
    €136 Keskimäär. tarjous
    25 tarjoukset

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    €4807 (Avg Bid)
    €4807 Keskimäär. tarjous
    29 tarjoukset
    cartoonised drawings 3 päivää left

    Need 8-10 still image drawings if cartoonised characters. The drawing needs to be done in adobe illustrator and file provided in .svg format. Similar to this in the video attached. [kirjaudu nähdäksesi URL:n]

    €122 (Avg Bid)
    €122 Keskimäär. tarjous
    22 tarjoukset

    Installing a boiler - feed tank - blow-down tank - water softener with heat exchangers (steam shell , water tube) to act as a split system to provide hot water to 30 wash stations for CIP and two different temperature zones (120 degree x 29 zones and 170 degree 1 zone)

    €321 (Avg Bid)
    €321 Keskimäär. tarjous
    32 tarjoukset
    Need acad drawings 2 päivää left

    I need Autocad designs copied from a PDF.

    €39 (Avg Bid)
    €39 Keskimäär. tarjous
    16 tarjoukset
    Amazon Mechanical Turk Id Creation 2 päivää left
    VARMENNETTU

    Want to create Amazon Mechanical Turk Id (Mturk) and work on it.. Need Indian ids...

    €15 (Avg Bid)
    €15 Keskimäär. tarjous
    19 tarjoukset

    Have 2d drawing of a machine with 26 parts. I require a 3d model with assembly and motion simulation using catia kinematics

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    47 tarjoukset

    Seeking animated artist to assist in project.

    €141 (Avg Bid)
    €141 Keskimäär. tarjous
    10 tarjoukset

    Require a logo for a makeup artist, simplistic and basic enough it can be printed onto business cards but also have elements of elegance and brightness. Logo will read:- "Michelle Hale Make-Up Artist"

    €35 (Avg Bid)
    Taattu
    €35
    46 työtä

    ...to be exactly the same as the pictures. My interest is in the clothing. If you can finish adding the legs that would be a plus. PLEASE DO NOT BID BEFORE LOOKING AT THE SAMPLES. There are 45 pictures in a batch and I will have a new batch every few weeks. The price you bid must be for all 45 pictures. Please complete of of the pictures as a sample

    €113 (Avg Bid)
    €113 Keskimäär. tarjous
    31 tarjoukset

    any body expert in event or infographic ppt work share there few samples

    €21 / hr (Avg Bid)
    €21 / hr Keskimäär. tarjous
    8 tarjoukset
    Conveyor Feeder Drawings 1 päivä left
    VARMENNETTU

    Need schematics of parts required to create conveyor feeder. Video file of working model as well.

    €364 (Avg Bid)
    €364 Keskimäär. tarjous
    52 tarjoukset

    voice over for 20-30 projects a year. Please send samples.

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    43 tarjoukset
    Mechanical Engineering Project 1 päivä left
    VARMENNETTU

    Mechanical Engineering Project

    €94 (Avg Bid)
    €94 Keskimäär. tarjous
    44 tarjoukset

    Need an experienced doodle creator for a 90 sec video. You must have experience in creating custom drawings for doodle and some basic animation

    €171 (Avg Bid)
    €171 Keskimäär. tarjous
    43 tarjoukset

    I need line drawings made . vector form . li e thickness 0.50mm . main lines / outlines only no small details . please know how to do this.. be responsive be honest do not complain argue or dissapear be responsive UNDERSTAND WE PAY $2 PER HOUR NO MORE !! message me

    €2 / hr (Avg Bid)
    €2 / hr Keskimäär. tarjous
    24 tarjoukset

    I want simulation of a structure to be done in abaqus. I will provide the details the chat.

    €117 (Avg Bid)
    €117 Keskimäär. tarjous
    3 tarjoukset

    I'm looking for a help to solve exercises of mechanics / phyisics about rigid bodies and mathematical analyisis of mechanical systems. In particular we will face problem concerning statical and dynamical systems and kinematic aspects. The job requires only few hours of work. Please contact me for more details. Thanks in advance!

    €105 (Avg Bid)
    €105 Keskimäär. tarjous
    40 tarjoukset

    I need a spreadsheet with the ability to input multiple variables involving mechanical engineering and electrical engineering knowledge. This is different from the 1st project I posted last week. Please review the PDF I have supplied before bidding on this project. The spreadsheet will calculate a system that involves a Force that is spinning a gear

    €190 (Avg Bid)
    €190 Keskimäär. tarjous
    18 tarjoukset

    I need the expert freelancer for my current project. Details will be shared with winning bidder. Please bid if you have the experience.

    €51 (Avg Bid)
    €51 Keskimäär. tarjous
    36 tarjoukset

    hello my name is Manuel and i am currently working at a pizza restaurant where me and a partner came up with an idea in designing an easy but useful machinery that may benefit bakerys and pizzerias. Its a simple mechanism that may help prevent future injuries for workers in such places. We would like to sit down and design the machine with someone that has experience with machines that may lift he...

    €284 (Avg Bid)
    €284 Keskimäär. tarjous
    31 tarjoukset

    hello my name is Manuel and i am currently working at a pizza restaurant where me and a partner came up with an idea in designing an easy but useful machinery that may benefit bakerys and pizzerias. Its a simple mechanism that may help prevent future injuries for workers in such places. We would like to sit down and design the machine with someone that has experience with machines that may lift he...

    €969 (Avg Bid)
    €969 Keskimäär. tarjous
    30 tarjoukset

    I have 2 trucks and 9 bins that are currently green and need to be changed to red and current logos changed out for a multilayered logo thats usable from the internet website [kirjaudu nähdäksesi URL:n] front page with butterfly top RHS. All design and AI files created already. You may need to on some hook lift bins delete some lines but nothing really hard to do. This should be a 1-2 h...

    €46 (Avg Bid)
    €46 Keskimäär. tarjous
    34 tarjoukset

    First, please know that this is our first time employing a freelance mechanical engineer, which means our limitations (ie hourly rate v flat rate) is flexible. To finish sand our product, we have been using Festool Rotex Sanders, which are geared random orbital sanders. If you know what a Timesaver is, we want to be able to lay the product down on

    €349 (Avg Bid)
    €349 Keskimäär. tarjous
    21 tarjoukset

    Redesign very old logo in Illustrator based upon guidelines and attached files as guide. New logo should be print and digital friendly with basic color scheme. Resulting files should include .ai. Please let me know questions and artist should be willing to make final adaptations as necessary.

    €88 (Avg Bid)
    Taattu
    €88
    12 työtä

    For detached double height double garage, which will have car ramp inside to store second car on each space at height, and also be able to be doubled up as car repair workshop. Site layout plan, Ground floor plan, Elevations, Cross section.

    €52 (Avg Bid)
    €52 Keskimäär. tarjous
    16 tarjoukset

    We are remodeling an apartment building. Changing out vanitys, showers, floors, furnaces. Most everything was existing we are just updating. We h...everything was existing we are just updating. We have the floor plans but the local city wants an engineers stamp on them. We are looking for someone to update and stamp the drawings so we can submit them.

    €797 (Avg Bid)
    €797 Keskimäär. tarjous
    16 tarjoukset

    We are a currently making a proof of concept of our product which is a protective insert. We have designed a model and require 2D, aerial and segment drawings of this model for production.

    €65 (Avg Bid)
    €65 Keskimäär. tarjous
    32 tarjoukset

    Create 15 unique pencil animal drawings, you can use inspiration from photos or other sites but the work must be unique and not be copyrighted. If you do a good job then there will be regular work each month. Any questions just ask, please provide a sample of your work if possible. Attached image for example purpose only.

    €27 (Avg Bid)
    €27 Keskimäär. tarjous
    21 tarjoukset

    You will need to make 3d models, and 2d models and drawings to pdf. I only have pictures of the item that needs to be 3d modelled in solidworks/edge/autocad. Model is with chain drive.

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    85 tarjoukset