STM32F407 and FSMC problem
R210-1750 ZAR
Maksettu toimituksen yhteydessä
Hi,
I have a project which is based on one of my older project.
Working project:
STM32F207 (runs at 120MHz) with USB and FSMC and 7"LCD and onboard NOR flash (M29 device).
Images are transferred from flash drive to onboard flash and then displayed on demand. This worked fine.
New project:
I redesigned the board to now use the STM32F407IGT6 (runs at 168MHz) and the S29 NOR flash device because it is bigger. The problem however is now that the imgages are misformed it seems like a FSMC setup issue i have played with different timings but it still doesn't work correctly. If i drop the CORE speed of the STM32 to about 32MHz it seems to work OK. This indicates a setup problem. I have to work on other parts of the project and would need someone to look into this problem in detail.
Attached are the relevant datasheets as well as the project. The project is built in Atollic Truestudio for ARM. A trial of this can be downloaded from the atollic website.
This is custom hadrware so an extensive knowledge of the stm32 and FSMC bus would be required.
Any help will be appreciated.
Projektin tunnus: #2458710
Tietoa projektista
9 freelanceria on tarjonnut keskimäärin R2839 tähän työhön
Hi, I have experience of 7 years in embedded system design base don 8/16/32 bit micro-controllers and processors. I have worked on Linux, Windows CE, FreeRTOS operating systems. I also worked on STM32 processors and e Lisää
Embedded Firmware ENGINEER with 9+ years of expreience.I worked for the MCU bot not for the peripheral.
Hi, We are small scale Indian Embedded Company having strong expertise over Embedded System Design and Development. looking forward to hear from you for more details, Best Regards, Dhaval