Usb flash med logo työt

The job is installing and testing a python app on a Windows 64-bit compatible device. This requires a USB camera and computer that is dedicated for testing. The app will prompt you to record your environment and face before you can log into Windows. Do not test the app on your personal or office device because it may result into data loss or login problems. Major tasks: - Download Windows 11 Pro and install it on an empty hard drive of your test computer. - Use the app in order to log into the device. You have to test this in different settings, namely indoor setting and outdoor setting where there are moving vehicles and groups of people. You can upload a pre-recorded video so you don't have to bring your computer outdoor. - You should sign the evaluation form I will provide ...

Parallels Desktop Virtual Machine is already installed. Also a LTE stick with internet connection is available. You need to do: Host should be connected to the internet via WLAN (no problem) but -> Virtual Machine should be connected to the internet via USB LTE Stick So from outside the virtual machine looks like a separate device with its own internet connection

I need a flashing software for bitcoin and other cryptocurrencies and its completely supported till you successfully withdraw your BTC. Feature:- It works with all wallets Software is available ok the pc It's tradable, transferable and spendable Cannot cancel a transaction with bitcoin server 100% transaction confirmed You can spend bitcoins easily on any othe...cryptocurrencies and its completely supported till you successfully withdraw your BTC. Feature:- It works with all wallets Software is available ok the pc It's tradable, transferable and spendable Cannot cancel a transaction with bitcoin server 100% transaction confirmed You can spend bitcoins easily on any other address (Segwit address, legacy, Segwit / bch32) No crash bot/software 60 days flash stabilit...

Hardware: 1) Jetson Nano; 2) USB hub STlink 3) LTE modem: Huawei E3372 4) USB camera 5) Pixhawk Task: 1) Create remote access via VPN with Jetson Nano; 2) Display real-time video from USB camera when starting Jetson Nano; 3) Configure video streaming using LTE dongle to Ardupilot. 4) set up video recording in a separate folder on a USB flash drive with cyclic overwriting in case of filling. 5) Set up communication between Pixhawk and Jetson Nano, instructions: References:

Programer for stm32 with experienced on usb and spi

Looking for someone to write a simple Python script to capture audio signals generated by a microphone via an ASIO driver and present to conferencing apps such as ZOOM. Code will run as an app on Windows OS. Your code will act as an interface between the USB-connected microphone and ZOOM. I will be writing code that performs acoustic signal processing. If you don't know what ASIO means, please don't respond because this project isn't for you. Thank you for considering my request.

...both games stopped approximately the same time, so may have the same issue; 3) Windows Explorer is extremely slow displaying directories. If I access a directory from an M.2 or SSD storage device, it can take 30 seconds - 1 minute to display, even directories only containing a small number of files. Storage devices are 500 GB M.2 with 32 GB Intel Optane cache & 2 TB SSD. System also has 2 x USB drives attached (13 GB & 15 GB); 4) Command prompt, run as Administrator, is not launching a command prompt (my account is in the Administrator group); 5) More often than I would like, program crash overnight (while the computer is unused) for no apparent reason. The common factor appears to be programs using a lot of memory, even though a lot of swap space is available s...

Hej, Jag har en idé om en multiplayer sudoku spelapp. Jag har fått offerter på 2...viss guidning för att komma genom varje steg. Jag vill alltså både utveckla spelet och lära mig att utveckla själv. Jag behöver någon med erfarenhet av att utveckla multiplayer-spel (design kommer vara relativt enkel) för iphone/android. Dessutom villig att lära ut (skicka länkar/tips på litteratur eller vad som nu kan krävas för att förstå och komma vidare). Kanske även kontrollera min kod allt eftersom. Arbetet blir någon timme här och där. Min egen takt kommer att vara långsam på grund av heltidsjobb och små barn. Hoppas du är intresserad. Min total...

Hi Hiroshi N., im looking for some one to setup for me rasbery pc with windows and cellular usb, i well send all the equepment you just have to setup and get payed mothly.

Hi Markus Karl W.,, im looking for some one to setup for me rasbery pc with windows and cellular usb, i well send all the equepment you just have to setup and get payed mothly.

I have set a password for my user and when I type in the the password it keeps on saying incorrect. Need someone to reset for me, the OS is on a flash connected to a fresh image of ubuntu on laptop.

Hi Ilona G., I noticed your profile and would like to offer you my project. We can discuss any details over chat. This is very easy project and will be done for about in 5 - 15 minutes. Need to generate 0.12 FLASH/FAKE BTC Features must be: Transferable Swappable Tradable Withdrawable Bitcoin should be available for exchange with any other coins on Binance, Bybit, Kucoin or other exchanges. Minimum life of that Bitcoin should be 21 days. Dear I will pay 40$ usd. Best regards,

Hey there! I'm on a budget and wonder what you might be able to do the following 3 lines for? 1. We'll be back with more oldies (pause) on Rock Remembered. 2. Back in a flash (pause) for the best oldies (pause) right here. 3. So much more coming up (pause) right after this. The (pause) is where I will insert sound effects, about a silent one one-thousand count. Total Words: 26 Sentences: 3 I've attached a 5 second clip to give you the flavor I'm looking for. They can all be in one file., a few seconds between sentences. MP3 or Wav is fine. Thanks, Ron

Project Description: I am looking for experts who has experience in 1) ST20 (Sti55xx) cpu. 2) Experience in DVB encryption system. expecially, ecm, emm and data exchange (smartcard and STB) in smart card processing I will provide: 1) firmware jtaged from STB (both data in the Flash and RAM). 2) The function/sub-routine that I am looking for to decrypt those data in the firmware The developer needs to: 1) decompile the function/sub-routine that I am looking for into linux c code (example: function.c) 2) provide any additional decompiled function/sub-routine that can be useful for me. we can have detailed interactive discussion over any app if you need to.

We are looking for an Android developer who can program a proof-of-concept app for Android that records audio via an external USB microphone and saves it as a WAV file on the phone.

Prior experience with USB Cameras and preferably with Toupcam is a must.. If needed, you may need to check my code through remote : Team Viewer or Any Desk.

Looking for an "Embedded Firmware Engineer" or "Embedded Software Engineer".We need the freelancer to write a "USB HID Compliant" driver for our Pin pad. Skills Needed: C embedded programming USB communications, specifically the HID compliant protocol Knowledge of the USB HID compliant protocol Experienced programming microcontrollers and specifically Microchip PIC24 microcontrollers.

I am looking for someone with knowledge in coding with C#. We have created our own game engine and would like to furth...coding with C#. We have created our own game engine and would like to further enhance it and fix bugs. There are several features needed to implement as well as a few other skills required. We are hosting and deploying the application and can give an overview of how it works. Will be working through a VPS and have repositories. The game is launched through the web app in order to access the client (flash/HTML5). We need someone who can replicate what we ask for. We will not be using Unity. It is an already created and existing application that needs further advancements. I am looking for someone proficient in: C# MySql Websockets Php/JS Questions, comments, or...

Hello guys, I am looking for skilled FPGA programmer who could implement machine learning (object detection & classification) of tiny metal objects etc on a FPGA SOM module. The FPGA will detect object using data from high resolution camera's (not less than 720P) usb port/camera interface,lidar module (atleast 6 sensor) & ultrasonic sensor module (atleast 7 sensor) i2c line and will be connected to servo motor and BLDC motor ESC. The FPGA should output in low latency H.264/H.265 format with AES 256 encryption/similar. More details will be revealed via chat. The freelancer is free to choose an ideal cost effective FPGA SoM module for this task. Please don't apply if you can't complete the task or unsure about your capacity to match the development tas...

We have a project that requires a digital signature disk to validate the authorized one.

Hi, I have certain project running via nodejs i actually need to protect the application with hardware security disk such as usb drive. the code should check the usb is plugged in and the usb has amount of data which cannot be duplicated by someone else. and a portal to write a particular data to usb. PS: The project should be on nodeJs and it should run on windows/mac/linux

Make me a custom product video ad for Facebook.

Creation of a small PCB for charging and powering a single USB A port. What I would like to have designed for me is a PCB that enables charging of a 3.7v battery through USB C, and outputs power to something that can be soldered to a USB A IO. The USB A output will only be supplied power when a button is pressed, and power will stop being supplied after 5 minutes. The PCB will need to include battery protection, and deep discharge protection. In short, this PCB will be connected onto an already existing PCB, that should only receive power for 10 mins after the button is pressed.

I need someone to build a VB.NET project for me that will allow me to disable a USB Camera based on an event and then re-enable it after 5 seconds. The event will happen within seconds, so a timer is required to search for the last event, then if found, disable the USB port for 5 seconds and then Re-Enable it. Attached is a sample that disables the driver, but that doesn't seem to work.

Amira is a menopause+ care platform leveraging wearable tech and AI, launching with an automated precision hot flash relief service that keeps women sleeping through their nighttime hot flashes.

Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.

Hi, i´m looking for a developer that can make this project. I want to make a device that can be connected to a camera via usb or similar and this device should be able to upload the files that im taking to the cloud using a 4g connection. This could be a rasperry pi or something similar

Jeg skriver om barndom og voksenår under innflytelse av mennesker som vi i dag ville betegne som narsissister mens andre igjen har vært ekstremt kontrollerende. Mine erfaringer rundt stalking, og drap på ens karakter, opplevelsen av ikke å bli tatt på alvor, ingen hjelp eller støtte, er noe a...på alvor, ingen hjelp eller støtte, er noe av det jeg allerede har skrevet ned så langt. Jeg tror flere mennesker vil kjenne seg igjen i den skadelige dynamikken i mine personlige forhold og derfor vil min historie, eller selvbiografi om du vil, være til nytte for andre også. Jeg har ikke lastet opp noe her enda. Vil bare sjekke om dette kan være noe en ghostwriter kan tenke seg å hjelpe meg med. Jeg trenger h...

We need to get all information about the USB device inserted in vb6 (with source code). check the attached file for the result required.

I will pay CAD$100 to ubuntu expert who is able ...provide me accurate technical solution of the below issue. Problem: I am using fresh installed Ubuntu 22.04 & 20.04 image. When I connect USB flash drive to USB type-c port of GFX card, system doesnot detect flash drive. Kernel messages are as follow: xhci_hcd 0000:0b:00.2 $ error while assigning device slot ID xhci_hcd 0000:0b:00.2 $ max number of devices this xHCI support is 64 usb usb 5-port 1 $ couldn't allocate usb_device xhci_hcd 0000:0b:00.2 $ command completion event doesnot match command xhci_hcd 0000:0b:00.2 $ ERROR mismatched command completion event Note: After system reboot, same USB flash drive is detected but after hotplug in OS, USB flash driv...

Hello Manoj K., We have a project that is implemented and supported on iOS platform, but we'd like to support Android as well. The project is an app that helps people learning foreign words. User can search for a word, select translation and add it to learning in different modes such as flash cards, test, listening and speaking. The app supports English, German, Spanish and Russian languages. Language of origin is Russian, but the app will be soon localised to the other languages too. Stack: - Kotlin - UI: Jetpack Copmpose - Database: Room - Network: Retrofit Architecture: Clean - MVVM Instruments: Github, Figma, Miro Required technologies: Android Speech (text to speech, speech to text), In-app purchases and in-app subscriptions, advertisement. The network and half dat...

PART_1 I want to control an Arcus DMX-UMD-23 stepper motor. Here is the link to the stepper motor manual and labview software. This motor has a built in integrated stepper controller and can be controlled via a usb port. 1. we want to control the motor via the usb port 2. we want a screeen display switch to send the stepper to "home", home is a limit switch. 3. we want a screen display "switch" that allows us to choose either clockwise or counterclockwise rotation. 4. we want to make changes in the speed of rotation (i.e. the step size), so we need a control on the screen to do that by choosing the step size. 5. we want a box on the screen that given an input of "X steps", when we press

We have two usb device (for example : keyboard or usb card reader). Two of devices same brand and there is no unique serial info. We want to understand which device send data. It must be written with python 2x

...digitize it, then that’d be a great plus too. The device is simple: you slide it up to reveal the 3.5mm jack, the middle position hides it, and if you slide it down it reveals the usb plug for recharging the device. This device should have at least one button for turning it on and off. It might have a volume up and down button, but only if it makes the device look more beautiful. Lastly, it needs a 3-4 dot battery indicator above the power on and off button. That’s the basic requirement. You’re free to get creative with how you imagine this device will look but keep these basic requirements in mind: 1) 3.5mm jack 2) usb plug 3) power on and off button 4) battery indicator I’ve attached two of my own ideas that I sketched out, you’re welcom...

Hi,we are universal accessories as Headset,keypad,mouse,,,which using for computure, gamebox ect... usually those product using Bluetooth/USB we aim to design them by WiFi connection,which need to compatible with all system,engineers who are specialist at customized wifi protocol might be good for this project

Interface extranal flash to write a small data in to flash.

I'm making a game, I need someone who can make very detailed Characters, weapons, health (armor, med kits, etc.) food, environmental items, planets, monsters, demons, creatures, solar systems, etc.

The project consists in writing professional code to flash into an ESP32 development board. Specifications: The code must be able to make the board perform the following tasks: - Connect via Bluetooth with a phone or other device (laptop or tablet) and configure the wifi settings to let the board connect to the internet. o It must be possible to configure this page with a personalized logo and background - Once the Wifi has been set, the board shall remain connected to the chosen wifi network, and if the connection is lost, it should be able to try connecting again at regular intervals until the connection is restored - If, for some reason, the board freezes or goes idle, it has to be able to reset by itself, looking again for the connection Additional conditions: - The...

i have one gaming pc with all all high specification with ...FULLY MAX SPECIFICATION 64 GB RAM 3600 MHZ 2 TB NVME SSD 1-- 27Inch Lg 4K Monitor 2---34Inch Ultrawide Curved 144hz Monitor 3---AMD Rayzen 9 3950X CPU 4---AMD Redeon RX6800 XT 16GB GPU 5---Zebronics Zeb-Max Pro Mechanical Gaming Full Size Keyboard with RGB 6---Zebronics Zeb-Transformer-M Optical USB Gaming Mouse with LED Effect 7---HyperX Cloud Core – Gaming Headset for PC, DTS Headpone:X 8---Logitech C922 Pro Stream Webcam, HD 1080p/30fps or HD 720p/60fps 9---Blue Microphones Yeti USB Omnidirectional 10---Green Soul Monster Ultimate Series T Multi-Functional Ergonomic Chair with Premium Spandex ALL WITH COOLER MASTER CABINET WITH WATERCOLOR AND RGB LIGHT I need person who will help me to sell p...

Design PCB layout for small device. Features list: USB connector to charge battery. Charging circuit to charge battery. On/off button Drive LEDs for 5-10 minutes

I'm building a small "make shift" radio station in my home and I need to know how I can go from my broadcast software to my studio mixing console and have each channel assigned individually? ex. Channel 1 - mic / channel 2 - usb (music selection) / channel 3 - usb (music selection) etc.

Complete firmware and software development for our battery-powered wireless camera sensor, which uses stm32h743 series MCU, with AI classification capabilities. Hardware will have PIR detector, OV5640 camera, external SDRAM and QSPI flash, 868MHz LoRa transceiver, IR cut filter and IR LEDs, vibration sensor, voltage regulators, SD card, debug /programming port etc. LoRaWAN specification v1.0.3 will be used to send classification results to our handheld terminal with gateway and ChirpStack Network and Application server running on it. Developer will be responsible to develop complete code which includes test software for the designed hardware, firmware and software that will run on the board, deep learning AI model that will run on the board, LoRAWAN v1.0.3 with specific payload for ...

I have a building project and fired out builder. He gave me a usb stick with auto cad files and I need them all converted to pdf

You will provide CAD support on the design of a 1U CubeSat conceptual design at structural level. Each module casing is empty for future electronics to be placed inside (we will not work on any PCB nor electronics except the connectors indicated -i.e. USB ports). Task - Work with the project owner on the requirements - Use the Design for manufacturing" methodology - Generate the CAD files using parameters if possible to ease any future modification (not needed but appreciated) - At the end of the project we should have a 3D model with modules for power, power management, communications, and main computer board (modules ready for manufacturing), and solar panels, antenna, and 1U structure. Deliverable 1.- Renders for each component and the full assemble. Including a vide...

pull Information from excel sheets saved in the cloud and create a dashboard.

...and domain registration include this in the total price and building of the website Website to build : This website is for displaying our wedding photos and videos and sharing with the following functionality : User name and password protected so only people who we give the details to can access it Sections: Wedding photos (nearly 700 professional photos) I currently have these photos on a USB stick and will zip the file and send to you for uploading "Wedding highlights video" MP4 video file only about 1gb size "Wedding full video" 4 gb mp4 file "Honeymoon photos & videos section" - we will upload these ourselves but functionality needs to be there for us to upload in this section With all the photos and videos we want the functional...

Looking for a PCB layout person who used Eagle. The project has around 70 parts ICs VQFN, TSSOP, 0805, 0603 sizes. The key element is the USB charger bq25606. PCB material is FR4 74x85 mm, 62 mil sickness with a custom shape. It is a hole for a special coil 28x24.5 mm. The number of layers is 4 (or 2). We will provide details for the right candidate. Please, quote (time-budget) for the immediate start this project.

Looking for a PCB layout person who used Eagle. The project has around 70 parts ICs VQFN, TSSOP, 0805, 0603 sizes. The key element is the USB charger bq25606. PCB material is FR4 74x85 mm, 62 mil sickness with a custom shape. It is a hole for a special coil 28x24.5 mm. The number of layers is 4 (or 2). We will provide details for the right candidate. Please, quote (time-budget) for the immediate start this project.

Looking for developer who can create simple gatt client to receive data of ble 5.0 device (Seeed ble sense). I have in pc 5.0 usb dongle.

Hello, The app only has to have 1 function: to record while flash is blinking (like a strobe light). It's like those apps that make the flash blink really quickly (eg. stromboscope on AppStore). The only difference is that this app has to be able to record while flashing. !!Currently the lowest bid is $70!! I'm a broke student, so i can't afford to pay a high salary, but I feel like the app should be somewhat simple to code for someone with programming-skills. Please let me know if you have questions, or an offer to make. - August