Need a live MS-Teams session finishing configuring a new cAP ax on my MikroTik CCR2116

@tangramua

Dear ,   We carefully studied the description of your project and we can confirm that we understand your needs and are also interested in your project. Our team has the necessary resources to start your project as soon as possible and complete it in a very short time.   We are 25 years in this business and our technical specialists have strong experience in Linux, Network Administration, WiFi, Network Security, System Administration and other technologies relevant to your project.   Please, review our profile https://www.freelancer.com/u/tangramua where you can find detailed information about our company, our portfolio, and the client's recent reviews.   Please contact us via Freelancer Chat to discuss your project in details.    Best regards, Sales department Tangram Canada Inc.     

@AZTURK1

Bid: $27 — Finish New cAP ax Join to Existing CAPsMAN Why I’m a fit I’ve run MikroTik CAPsMAN deployments on CCR routers (CCR2004/CCR2116 class) with cAP ax units in mixed fleets, including the exact failure mode you’re hitting — cert is trusted, device shows up in `/caps-man registration-table`, but doesn’t promote to a provisioned AP. It’s almost always one of three things: 1. Certificate Common Name mismatch — CAPsMAN matches the AP by the CN in its cert against the expected name pattern. If your two existing units were provisioned before you standardized the CN, the new one is silently rejected even though the cert validates. 2. Radio/channel/profile not matching the new hardware revision — cAP ax has dual-band radios; if CAPsMAN’s `datapath`/`configuration` profile doesn’t list both, or the channel list excludes what the new radio is advertising, it stays unregistered. 3. Bridge/VLAN tagging on the AP-side uplink port — different from the working pair. What I’ll do in the session (ssh-only, all commands logged) - Pull `/caps-man registration-table`, `/caps-man interface print`, `/caps-man provisioning print`, `/interface bridge port print`, `/certificate print detail` - Diff working APs vs new one: cert CN, radio MAC, bridge port PVID, caps-man identity - Fix the root cause (likely cert re-issue or `provisioning` rule edit)

@ExpertNetworkEng

Hello, I’m a Senior Network & Security Engineer with 10+ years of hands-on experience designing, implementing, and migrating enterprise and service-provider networks. I specialize in Network Security, SD-WAN, routing & switching, enterprise wireless, and secure network architecture, helping companies modernize legacy networks, improve reliability, and reduce WAN costs. Core expertise: - Firewalls & Security: FortiGate, Palo Alto, Cisco ASA / Firepower IPsec & SSL VPN, site-to-site, remote access, policy design - Routing & Switching: Cisco ASR/ISR, Catalyst, Nexus, Juniper Routers (M10, MX 960) and SRX 500 (BGP, OSPF, EIGRP, IS-IS, MPLS, VLANs, STP, HSRP/VRRP) Enterprise LAN & campus design - LAN Switching (Multi-Vendor): Cisco, Juniper, Meraki, HP, Aruba, FortiSwitch Access/core design, redundancy, QoS, segmentation - Enterprise Wireless: Cisco WLC & APs, Cisco Meraki Wi-Fi, Ubiquiti, Aruba Wi-Fi, FortiAP Coverage design, roaming, security, troubleshooting - SD-WAN: Fortinet SD-WAN, Cisco SD-WAN (Viptela), Cisco Meraki (hub-and-spoke, MPLS + Internet, segmentation, HA, traffic steering) - Cloud & Hybrid Networking: AWS / Azure / GCP Site-to-site VPN, routing integration - Network Automation: Python Certifications: CCIE Enterprise Cisco Certified Specialist – Enterprise SD-WAN Implementation CCNP Data Center CCNP Security Juniper JNCIA-Junos, JNCIA-Cloud If you share your current setup and goal, I can propose a clear and practical solution. Best regards,

@zulqrn

Hi there, I’m a Network Engineer. I would love to assist you. Please let me know a good time to discuss. Thanks

@naminghn

Hi there, I can assist you with configuring your new cAP ax on the MikroTik CCR2116 using MS-Teams for screen-sharing and voice interactions. Since you're aiming for CAPsMAN recognition, I can provide direct support for command execution via SSH to ensure seamless integration with your currently configured APs, including completing WPA3-Enterprise setup and resolving any issues with RADIUS server linkage. It’s crucial to get this configuration right, and I’m committed to delivering high-quality results that meet your project needs effectively. Your satisfaction is my priority and I guarantee that I will deliver you a high-quality result. Regards, Ali

@emilesd617

Hi, Thanks for your invite. I am a network administrator with 8 years of rich experience in software development, with a background in Linux systems, network administration, WiFi infrastructure, and secure network configuration. I am familiar with Linux, MikroTik RouterOS, CAPsMAN, WiFi, VLANs, WPA3 Enterprise, RADIUS, SSH, and network security. For this project, I can work with you through MS Teams and screen sharing to troubleshoot the CAPsMAN registration, compare the new cAP ax configuration with the existing access points, and complete the required SSH configuration so the new AP operates consistently with the current setup. I'm an individual freelancer and can work on any time zone you want. Please contact me with the best time for you to have a quick chat. Looking forward to discussing more details. Thanks. Emile.

@binayatri

Hi, The main issue is getting the new cAP ax adopted by CAPsMAN and matching the working configuration of your existing two APs, without changing anything unnecessarily. I’m comfortable troubleshooting RouterOS 7, CAPsMAN, VLANs, certificates, WPA3-Enterprise and RADIUS, and I can work entirely through your SSH session over Teams so every command is visible and recorded. I’d first compare the new AP’s CAP configuration and discovery/adoption state against the two working cAP ax units, identify the mismatch, then make the minimum required changes and verify client authentication, VLAN assignment and wireless operation. I’ll work only through your shared SSH session; no direct access is required. Let's connect and get started soon. Best regards, Binaya T.

@ahmaddar2970

I can help finish this live MikroTik CAPsMAN setup over MS-Teams by working through SSH only, exactly as requested. Since your two existing cAP ax units already work on RouterOS 7.22.3 with WPA3-Enterprise, certificates, and RADIUS, I’ll focus on making the new cAP ax match the current CAPsMAN configuration and identifying why it is not being recognized. We can proceed methodically: verify CAPsMAN provisioning and discovery, compare the new AP’s identity and radio settings to the working units, check certificate trust and management connectivity, and confirm the VLAN and CAPsMAN parameters needed for the AP to register correctly. I’ll keep the process command-based so you can record every step. My goal is to get the third cAP ax functioning identically to the other two with minimal disruption to your existing Wi-Fi service. I’m ready to start from the current SSH state and troubleshoot live until the AP joins CAPsMAN correctly.

@miguelcen64

Hello, The key part of this project is **getting the new cAP ax fully adopted by CAPsMAN so it behaves exactly like your existing two access points over SSH**. I can help you handle this accurately and efficiently without overcomplicating the process. I have hands-on experience with **Linux, System Administration, and Network Security**, including troubleshooting RouterOS-style access and authentication flows in managed WiFi setups. For your project, I would focus on **CAPsMAN provisioning**, **WPA3-Enterprise/RADIUS validation**, and **certificate and VLAN alignment checks**, while making sure the final result is **stable and matches the current AP behavior**. I can start immediately and expect to complete this within 3 hours. One detail I'd like to confirm before starting: **is the new cAP ax already set to the same CAPsMAN datapath and provisioning rule as the other two APs**? Best regards, Miguel

@amadorjay

Hi there, The hard part is ensuring the new cAP ax is fully integrated into the existing CAPsMAN setup without disrupting your current network. Since the new AP is already recognized by the CCR2116, the challenge lies primarily in configuring its settings to match the other access points effectively. I can assist you with the SSH commands needed to finalize the configuration, ensuring the new access point mirrors the functionality of your existing devices. We can address any potential issues with CAPsMAN recognition during our sessions. Could you confirm if there are specific settings or features from the existing APs that you want to ensure are replicated in the new one? Looking forward to discussing the details in chat.

@oleksandrp67

Hi there! Ensuring CAPsMAN properly recognizes the new cAP ax requires verifying certificate trust and VLAN consistency across all managed APs. I will deliver a fully configured access point integrated into CAPsMAN with matching WPA3-Enterprise settings and seamless VLAN operation, ensuring consistent network security and management. I've worked with MikroTik RouterOS, CAPsMAN, WPA3-Enterprise, RADIUS servers, and SSH-based network configuration. Looking forward to discussing with you. Best regards, Oleksandr

@bojans9

Hello, I understand you need to finish provisioning one new cAP ax so it joins CAPsMAN and behaves exactly like your two existing APs, while preserving your VLANs, certificates, WPA3 Enterprise, and RADIUS setup. I can help diagnose the CAPsMAN discovery and provisioning issue by comparing the new AP configuration against the working cAP ax units and tracing the registration path from the CCR2116. I can work through SSH and provide clear commands you can record and keep for future reference. I can also help identify whether the issue is CAP mode, certificate trust, CAPsMAN provisioning rules, interfaces, or RouterOS configuration differences. Could you share sanitized exports from the CCR2116, one working cAP ax, and the new cAP ax? Also, does the new AP appear in any CAPsMAN registration or log output? Best regards, Bojan Spasic

@Maxxionn

Hi , You need an expert in Linux, System Administration, Network Administration, Network Security and WiFi, and I have a tailor-made solution ready for you. Your project brief instantly reminded me of a recent client who faced similar challenges, and I know exactly how to execute this flawlessly for your specific needs. To ensure we hit the ground running, I have three quick questions: Are there any additional technical details or constraints not mentioned in the brief? What is the primary hurdle currently blocking your progress on this? What is your strict timeline for completion? Why trust me with your project? The Record: 250+ Projects. 6+ Years. 100+ consecutive 5-star reviews. The Standard: Zero misses. I don’t just finish the job; I guarantee flawless execution. The Availability: Full-time freelancer, online 9 AM - 9 PM EST. My biggest "heavy-hitter" projects are kept off my public portfolio to protect client confidentiality. Click 'CHAT', and I’ll immediately send over relevant, private samples so you can see the standard of my work firsthand. Best regards, Muhammad Arsalan

@FizzaNadeemK

Hello, I can help complete the configuration of your new cAP ax and integrate it cleanly with the existing CAPsMAN setup on your CCR2116. I’ll work with you through MS Teams using screen-share and voice, perform the configuration via SSH as requested, and ensure the new AP matches the existing WPA3-Enterprise, certificate, RADIUS, VLAN, and wireless configuration. I’ll first troubleshoot why CAPsMAN is not recognizing the new AP, then complete the required provisioning and verify connectivity, authentication, and client functionality. I’ll keep the process transparent so every command is recorded and provide a concise summary of the final configuration. Best Regards, Fizza

@bhargav922002

Hello, I’m bharghav, and I bring over 10 years of experience in matching job skills, particularly in Linux environments. My expertise aligns well with the project you’ve outlined, ensuring that I can assist you effectively with the MikroTik CCR2116 configuration. I understand your need to finalize the setup of your new cAP ax access point through MS-Teams, using SSH for command execution. Our session will focus on diagnosing why CAPsMAN isn't recognizing the new access point and maneuvering through the necessary configurations to ensure it functions like your existing units. I’m well-versed in RouterOS and familiar with WPA3-Enterprise setups, which will enable us to streamline the process and ensure all devices work harmoniously in your network. Let’s start a chat so we can discuss this project further and tackle the configuration challenges together. Your setup will soon be up to the desired specifications with my help. Best regards, bhargav922002

@aribaumer

Hi, Clear technical direction ensures a smooth RouterOS setup, and keeping that in mind, I can complete the provision of your new cAP ax so it mirrors your existing deployment. I am ready to start immediately by joining your MS-Teams screen-share to execute all steps via SSH. My approach focuses on reviewing your current CAPsMAN interface configs, verifying certificate bindings, and applying the matching provisioning rules. Let me know if the remote cAP ax is currently showing as an authorized CAP device in the main router system log. Recently, I worked on a similar project involving a multi-site MikroTik wireless deployment. The setup was built to centralize access point management across isolated VLANs using CAPsMAN on RouterOS 7. I configured the SSH command pipelines, verified RADIUS settings, and mapped WPA3-Enterprise security profiles across all CAP devices. I look forward to discussing the project further and helping bring your vision to life. Best, Ariba

@bcosley

Hi, You're finishing provisioning a new cAP ax on the MikroTik CCR2116 that should join two CAPsMAN-managed APs. I’ve handled similar MikroTik CAPsMAN upgrades where a new AP enrolls with the same WPA3-Enterprise policy, certificates, and RADIUS flow. I’ve done SSH-based provisioning for CAPsMAN in production environments. I’d start by validating CAPsMAN's AP registry and certificate trust, then push provisioning to new AP and watch for binding. I’ll verify client authentication and VLAN tagging with a quick test and capture the commands for audit. CAPsMAN state caching can delay recognition of the new AP; a reload or rebind may be needed. What should we do if CAPsMAN fails to recognize the AP after provisioning, a rebind under the same profile or a reset and redo? Are there any maintenance window constraints, and where should I store the command log for later review? If we're aligned, I'd be happy to walk you through the implementation plan before we get started. Best regards, Brandon

@akshaykumarp07

Hello, I can help you complete the configuration of your new MikroTik cAP ax and get it working consistently with your two existing CAPsMAN-managed APs. I understand your setup includes: * MikroTik CCR2116-12G-4S+ * RouterOS 7.22.3 * CAPsMAN management * WPA3-Enterprise * Certificate-based CAPsMAN management * RADIUS authentication * VLAN-based network configuration * Multiple cAP ax access points Since the new AP is already recognized by the CCR2116 and the required certificate/VLAN configuration is in place, I would focus on identifying why CAPsMAN is not recognizing/adopting the new cAP ax and then matching its configuration with the existing APs. I’m comfortable working through SSH and can keep the troubleshooting process command-based so you can record the complete session. I’ll also compare the working AP configuration with the new device and make changes carefully to avoid affecting the existing wireless network. I can provide clear explanations of each command and verify connectivity, CAPsMAN adoption, certificates, RADIUS authentication, VLANs, and wireless configuration after the changes. I’m available to work with you through an MS Teams screen-share session. Best regards, Akshay Kumar Patel

@bhaskark96

Hello, I can assist you through MS Teams screen-sharing and voice sessions to complete the onboarding of the new cAP ax into your existing CAPsMAN environment. I am comfortable working entirely via SSH so all commands can be recorded and documented. Given that the AP is already reachable, has the required certificate, and is connected to the correct VLANs, I will focus on CAPsMAN discovery, provisioning, certificate validation, CAP registration, wireless configuration, and WPA3-Enterprise/RADIUS integration to ensure it operates identically to the existing access points. We will validate each step, compare the working AP configurations, and perform end-to-end testing to confirm successful client authentication and wireless operation. I am available to start immediately and can work alongside you until the new AP is fully operational. Thank you.