Käynnissä

Make a 3D model of an electronics case from a diagram.

This is the case of an electrical device that will be 3D printed. All walls must be at least 1mm thick. The grid is in mm but if you think that something doesn’t quite line up just ask me about it. The white parts are where components of a fixed size will go. I will need to check cross sections and dimensions of components before final approval and am available to check over anything while you make it.

I will need the file as a STL, STP and the native file format you work in. After this I will send it to the 3D printer to ensure that the model meets their requirement. When all requirements are met the job will be complete.

There are 4 segments to this design.

The cover (in green). The purpose of this is to divert any water droplets into the catchment area and away from the 2 main shafts. The curves in the schematic are inaccurate and you will need to use your expertise to work out something functional and aesthetically pleasing. For a general idea I have attached a photo which has similar curves (but inverted).

The latch (in red). This is a cap to be placed on top of a disk shaped component. It needs to be pressed in and should lock in place when rotated. The end result will be flush with the curves of the cover (green) segment.

Body (in navy). On the outside of the lower segment there should be ventilation holes. The style is shown in the links.

Base plate (in blue). The PCB mount with 3 points is fine, but the other with 4 is not. There is a model in the links which measurements can be taken from. The hexagonal holes are for nuts and bolts so that it can be fastened in place.

The 4 Arduino Uno PCB mounting points and size are the same as in this device:

[url removed, login to view]:101985

I will also need ventilation in the bottom segment where the electrical components go. Please use this style:

[url removed, login to view]

Example of a twist lock:

[url removed, login to view]

Picture of the outward facing curve on a micro USB:

[url removed, login to view]

A model of the arduino micro to be used to find the placement of the mounts

[url removed, login to view]:393024

Example of an off-centered curve:

(Attached)

Taidot: 3D-mallinnus, 3D-tulostaminen, Teollinen muotoilu, Teollisuustekniikka

Näytä lisää: need engineer lower mantlepeice, mechanical modelling, event modelling service, d do, modelling plate ansys, sequence diagram case, diagram case study project, diagram case study, simple diagram case study, using diagram case study, project case electronics, myfreecams model make money

About the Employer:
( 5 reviews ) Sydney, Australia

Projektin tunnus: #13174739

Myönnetty käyttäjälle:

vickkjob87

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? I have designed many industrial products , with complex shapes, that have been realized with Lisää

55 $ AUD 5 päivässä
(2 arvostelua)
0.8

40 freelanceria on tarjonnut keskimäärin 92 $ tähän työhön

avtar1073

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? Yes,I have experience to make industrial design.Please contact me to will show you my previo Lisää

80 $ AUD 3 päivässä
(304 arvostelua)
7.7
80 $ AUD 2 päivässä
(301 arvostelua)
7.7
zeraw

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? yes I have such experience Proposal: Hello, I`m an experienced design engineer skilled in S Lisää

220 $ AUD 5 päivässä
(109 arvostelua)
6.5
DesireEra

Hi, Hope you are doing great! I am very interested in working on your project as it matches my skills, experience and interest. Please do respond to me so that we can discuss further regarding the project.  Please go Lisää

100 $ AUD 3 päivässä
(87 arvostelua)
6.5
udayd75

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? Hello sir, i have read the project details and understood the requirement. i have 20 years Lisää

222 $ AUD 4 päivässä
(100 arvostelua)
6.9
marthakprashant

Thank you for posting project on freelancer ,I saw your job description, and yes, I am very positive for this project. & I will complete this on time ! .You Will get a regular updates on the progress of the project. I Lisää

30 $ AUD 3 päivässä
(122 arvostelua)
6.3
61 $ AUD 3 päivässä
(84 arvostelua)
6.4
100 $ AUD 3 päivässä
(83 arvostelua)
6.3
80 $ AUD 3 päivässä
(75 arvostelua)
6.4
100 $ AUD 3 päivässä
(55 arvostelua)
5.8
shahidaasy2002

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? Yes i have complete professional experience Here it is my few design job samples. htt Lisää

99 $ AUD 6 päivässä
(37 arvostelua)
5.6
61 $ AUD 3 päivässä
(59 arvostelua)
5.6
ZzeeDsMech

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? Yes, I do have 3 years of experience designing 160 product. please visit my portfolio http:/ Lisää

150 $ AUD 3 päivässä
(18 arvostelua)
5.1
moshchan

Hello! I can do your project. I am a 3D designer (my profession is Mechanical design engineer of air vehicles). I have experience of creating 3d models using different 3d/CAD software (Solidworks, AutoCAD, Rhinocero Lisää

80 $ AUD 5 päivässä
(34 arvostelua)
5.2
61 $ AUD 3 päivässä
(14 arvostelua)
4.7
mikezx

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? I am currently working on a measurements project for 3D printing. I have done many 3D projec Lisää

77 $ AUD 3 päivässä
(16 arvostelua)
4.8
MartinDalponte

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? I´m a professional designer with an extensive experience in consumer products design. I deli Lisää

333 $ AUD 3 päivässä
(8 arvostelua)
4.2
a1services

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? yes i did many designs. Proposal: Dear, sir/Mam My name is Aisha,I’m India based profess Lisää

80 $ AUD 2 päivässä
(8 arvostelua)
4.0
yashgargmech

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? I have 6 years experience in Mechanical design, manufacturing design, Special purpose machin Lisää

100 $ AUD 2 päivässä
(18 arvostelua)
4.0
papaidada

Have you have had industrial design or engineering experience? If not are you confident you can get the measurements correct? i am ready bro . if u want we can talk in chat. Proposal: i can give u realistic Lisää

61 $ AUD 3 päivässä
(9 arvostelua)
4.1