Peruttu

Make a 3D model of an electronic device from diagrams

This is the case of an electrical device that will be 3D printed. All walls must be at least 1mm thick. The grid is in mm but if you think that something doesn’t quite line up just ask me about it. The white parts are where components of a fixed size will go. I will need to check cross sections and dimensions of components before final approval and am available to check over anything while you make it.

I will need the file as a STL, STP and the native file format you work in. After this I will send it to the 3D printer to ensure that the model meets their requirement. When all requirements are met the job will be complete.

There are 4 segments to this design.

The cover (in green). The purpose of this is to divert any water droplets into the catchment area and away from the 2 main shafts. The curves in the schematic are inaccurate and you will need to use your expertise to work out something functional and aesthetically pleasing. For a general idea I have attached a photo which has similar curves (but inverted).

The latch (in red). This is a cap to be placed on top of a disk shaped component. It needs to be pressed in and should lock in place when rotated. The end result will be flush with the curves of the cover (green) segment.

Body (in navy). On the outside of the lower segment there should be ventilation holes. The style is shown in the links.

Base plate (in blue). The PCB mount with 3 points is fine, but the other with 4 is not. There is a model in the links which measurements can be taken from. The hexagonal holes are for nuts and bolts so that it can be fastened in place.

The 4 Arduino Uno PCB mounting points and size are the same as in this device:

[url removed, login to view]:101985

I will also need ventilation in the bottom segment where the electrical components go. Please use this style:

[url removed, login to view]

Example of a twist lock:

[url removed, login to view]

Picture of the outward facing curve on a micro USB:

[url removed, login to view]

A model of the arduino micro to be used to find the placement of the mounts

[url removed, login to view]:393024

Example of an off-centered curve:

(Attached)

Taidot: 3D-mallinnus, 3D-tulostaminen, Teollinen muotoilu

Näytä lisää: how to make a 3 d model of an euplectella, south africian company to help electronic hobbyist to make money, menmbhkn 3d model d cad 2015, download electronic model of house arquitetura 3d studio max, 3d model d orbital, 3d model d, make me presentation keynoteppt all fine, make me presentation (keynoteppt all fine) , d modelling design, d modelling contest, d modelling architecture, d modelling and autocad, d modelling and animation, d modelling 3d design, d modelling 3d animation 3d rendering 3ds max 3d design,, d modelling 3d animation 3d rendering 3ds max 3d design, d mechanical modelling, d max modelling, d jewellery modelling, d event modelling service, d do, d character modelling, d cad modelling, yahoo ajax car model year make, make simple electronic device

About the Employer:
( 5 reviews ) Sydney, Australia

Projektin tunnus: #13173366

22 freelanceria on tarjonnut keskimäärin 178 $ tähän työhön

avtar1073

Please ask about any questions you have and let me know if you have had any industrial design exp. Yes I have lots of experience in industrial [url removed, login to view] ping me when you will be available to discuss. Proposal: He Lisää

160 $ AUD 5 päivässä
(295 arvostelua)
7.7
inderar88

Please ask about any questions you have and let me know if you have had any industrial design exp. I understand the device requirements very well and will provide you STL file. Regarding my similar experience I design Lisää

170 $ AUD 3 päivässä
(296 arvostelua)
7.7
Singhstudio

Please contact me

100 $ AUD 3 päivässä
(66 arvostelua)
6.3
166 $ AUD 3 päivässä
(80 arvostelua)
6.4
DesireEra

Hi, Hope you are doing great! I am very interested in working on your project as it matches my skills, experience and interest. Please do respond to me so that we can discuss further regarding the project.  Please go Lisää

200 $ AUD 7 päivässä
(86 arvostelua)
6.5
Mdesigner1

Please ask about any questions you have and let me know if you have had any industrial design exp. you will 3d printed it for prototype and will do injection mold for munufactured large number of product ? Proposal: H Lisää

277 $ AUD 5 päivässä
(14 arvostelua)
6.0
vw2082690vw

Please ask about any questions you have and let me know if you have had any industrial design exp. I am a mechanical engineer specializing in 3D design with 10 years experience. I am interested your project and hope Lisää

250 $ AUD 3 päivässä
(79 arvostelua)
6.3
155 $ AUD 3 päivässä
(54 arvostelua)
5.8
Rinkustudio

Please ask about any questions you have and let me know if you have had any industrial design exp. i will provide you stl and step file format for printing i will ask you question when we will talk about it Proposa Lisää

200 $ AUD 3 päivässä
(31 arvostelua)
5.8
200 $ AUD 3 päivässä
(36 arvostelua)
5.8
120 $ AUD 3 päivässä
(27 arvostelua)
5.4
babanpreet852

Please ask about any questions you have and let me know if you have had any industrial design exp. I designed lots of product [url removed, login to view] show you my previous work. Proposal: Hello, After reading the job I understa Lisää

130 $ AUD 4 päivässä
(51 arvostelua)
5.3
100 $ AUD 3 päivässä
(13 arvostelua)
4.7
giritech

Hello, This is in regards to the advertisement posted by your organization for the vacancy in the position of a freelance designer. I would like to introduce myself as a graphic as well as 2D, 3D model and anima Lisää

70 $ AUD 3 päivässä
(15 arvostelua)
4.8
papaidada

Please ask about any questions you have and let me know if you have had any industrial design exp. hi . i am ready to do this. Proposal: i can give u realistic design , give me a chance and watch...if u dont like , no Lisää

155 $ AUD 3 päivässä
(6 arvostelua)
3.8
vikramjumwal

Please ask about any questions you have and let me know if you have had any industrial design exp. HI, i have checked the images i will do it can you let me know you need same model or need changes into that and also Lisää

300 $ AUD 4 päivässä
(11 arvostelua)
4.4
155 $ AUD 3 päivässä
(4 arvostelua)
3.9
funtastic24

Please ask about any questions you have and let me know if you have had any industrial design exp. i have checked the pdf and jpeg i will do it you need same model that you show? and can you provide me more view of Lisää

100 $ AUD 3 päivässä
(6 arvostelua)
3.6
tommydo1908

Please ask about any questions you have and let me know if you have had any industrial design exp. We have lots of experience in 3D design and 3D modelling using Solidworks. And we have lots of sample for 3D print tha Lisää

100 $ AUD 1 päivässä
(6 arvostelua)
3.0
abhayky93

Please ask about any questions you have and let me know if you have had any industrial design exp. Hi, this is Abhay. I am Design Engineer. I have several years of experience in product designing, especially in Solidwo Lisää

155 $ AUD 3 päivässä
(6 arvostelua)
3.0