I have a Avaya 4850 GTS network switch. Currently I have setup 2 VLANs (one for users, the other for devices). This switch is connected to my ISP's broadband router which gives out DHCP. What I need is for both VLANs to be routed so they can all go online, but without seeing the other VLAN. DHCP is also required on both VLAN. I dont mind if it came from my broadband router or from the switch, as longs as all devices attached to the network can have a dynamic IP address. You will need Teamviewer to login to my pc and use Putty to connect to the switch and program it with CLI. I will switch on the "save log" so all your work is captured just in case I need to re-do it again after a reset. If you know what you are doing, it will probably takes you no more than 20 mins to set it. Note: As I understand it, Avaya network switch has a similar command set as the Cisco network switch.
15 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön
I'm CCNA Certified, never worked with Avaya switches before, but as you said, if it's similar to cisco it won't be a problem. As you said, for a network enginner it's a easy task.
I m ready to take up this project, i have 10+ years of experience in networking with CCNA, CCNP, CCDP-arch & JNCIA-EX certifications. Please reach me to discuss further on this.
skillful net manager with quality and credit here! have rich experiences in net management. so hope to contact me and have a detailed discussion over chat Thanks