CAD/CAM simple basic dust shoe for CNC (.stl or GCODE)

Suljettu Julkaistu 2 kuukautta sitten Maksettu toimituksen yhteydessä
Suljettu Maksettu toimituksen yhteydessä

hello everyone, I have a hobby CNC machine (openbuild CNC) and I am in the need to make a dust shoe. I bought a few on [login to view URL] and they worked but in my case they all had the same issue. the main issue is that when I flatten a wood slab, i use a 2 1/2 inch router bit and when this big puppy spins fast it creates such a huge vacuum that no matter how strong the bristles i use they get sucked in and the bit cuts all the bristles. when i use a normal bit or a smaller bit there is no issues as the bit is so much smaller. so i just need a very basic model that the skirting itself would be wider to accommodate for that bit. it can be in any shape.


- the spindle itself (router diameter): 80 mm.

- intake for the vacuum 64mm.

- the skirting plate that can be put with simple small magnet must be at least roughly 165mm (that is for the skirting or bristles)

I just need an STL file so I can create gcode and do it on the CNC. I would 3D print it but it takes for ever usually and its not quite as strong in my opinion. (but if you prove me wrong i might listen to you :-)

Again I need something simple as i do not like things when its too complicated. I do not even care if its pretty as long as it works its all I want.

here's a few example for you to see but those are for 3d prints. its only to give you an idea.

[login to view URL]

[login to view URL]

[login to view URL]


Solidworks CAD/CAM Tuotesuunnittelu Koneenrakennus Valmistuksen suunnittelu

Projektin tunnus: #37218909

Tietoa projektista

18 ehdotusta Etäprojekti Aktiivinen kuukausi sitten

18 freelanceria on tarjonnut keskimäärin $42 tähän työhön


Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, Lisää

$250 CAD 7 päivässä
(52 arvostelua)

Hello sir, I am a mechanical engineer designer and SolidWorks expert with over 10 years of experience in the CAD/CAM field. I have experience working with MasterCam, Aspire vectric, solidworks, solidcam, autocad, keysh Lisää

$60 CAD 2 päivässä
(18 arvostelua)

Mechanical Engineer Expert Hi there, I will do this project according to your concepts and requirements. I have designed more than 100 projects so for. I would give high quality work and results. I’m professional MEP Lisää

$30 CAD 1 päivässä
(41 arvostelua)

Hey there! Thanks for considering me to work on your CAD project! My name is Chirag and I have 10+ years of experience designing and developing products. I specialize in product design and development with experience Lisää

$30 CAD 1 päivässä
(31 arvostelua)

Hello,  Hope you are doing well. Just read Your project description. need to make a dust shoe i have done many project-related engineering, Solid work, CAD/CAM, product designing, CFD & FEA simulation, design analysis, Lisää

$30 CAD 2 päivässä
(11 arvostelua)

Hello! I'm an experienced design and engineering professional with over 8 years of expertise. I specialize in: SolidWorks for 3D modeling, simulations, and automation with VBA. Sheet metal design for efficient and pr Lisää

$10 CAD 2 päivässä
(24 arvostelua)

Hello, Just gone through your project CAD/CAM simple basic dust shoe for CNC (.stl or GCODE) breifly I work on AutoCAD, sketchup, CAD/CAM, Solid Work, Interior/Exterior all kinds of architectural (residential and comm Lisää

$67 CAD 2 päivässä
(5 arvostelua)

Hello Eric V., I have carefully read your project requirements for a simple basic dust shoe for your CNC machine. With over 6 years of experience in CAD/CAM and Solidworks, I am confident in delivering the perfect sol Lisää

$50 CAD 1 päivässä
(2 arvostelua)

Hello, I am excited to hear that you are looking for a simple dust shoe for your CNC machine! I understand that you need one that can accommodate a 2.5 inch router spindle and intake vacuum hole of 64mm diameter. My na Lisää

$25 CAD 1 päivässä
(1 arvostelu)

Hi I AM B TECH MECHANICAL ENGINEER AND I saw your bid and I am complete the project as per your requirement because I have good knowledge of 2d 3D drawing with industrial experience more than 4 years

$11 CAD 5 päivässä
(1 arvostelu)

Hi, I have reviewed your design requirements. You want an stl file of a dust booth with a specified diameter to enable you CNC machine it DIY and set up quickly. I have experience in designing Products for CNC milling Lisää

$27 CAD 2 päivässä
(0 arvostelua)

Dear CNC Enthusiast, I understand your need for a simple yet effective dust shoe for your openbuild CNC machine. It's clear that you've encountered issues with existing solutions, especially when using a large 2 1/2 i Lisää

$30 CAD 3 päivässä
(0 arvostelua)

I work as a Mechatronics Engineer in the R&D department of an automotive company in Turkey. I take an active role in the Design and Analysis units. I can complete this project for you professionally in a short time.

$30 CAD 1 päivässä
(0 arvostelua)

I have been working with CNC and designing for many years. I have a solution for all the problems you have. I will design anything you want according to your design. You can see my work on Instagram. online_woodart

$20 CAD 7 päivässä
(0 arvostelua)

Hello everyone, I amMohamed, a 3D Designer with over 4+ years of expertise in CAD/CAM, Solidworks. I understand from your description that you need a simple dust shoe for your CNC machine that can handle a 2 1/2 inch r Lisää

$20 CAD 1 päivässä
(0 arvostelua)

My name is Abdul Jalil, and I am Architect & Technical Designer with more than 8+ years in design & technical design/drafting. The services I offer include: • 3D modelling , based on your sketches, drawings, pictures, Lisää

$20 CAD 7 päivässä
(0 arvostelua)