
Closed
Posted
Paid on delivery
I have drafted a small ESP32 board with an on-board MOSFET switcher in TSCircuit and want a fresh, expert set of eyes on the layout before I send it to PCBWay. The schematic is stable; what I need now is reassurance that the physical design will sail through fabrication and assembly without surprises. Your review should concentrate on overall layout quality and manufacturing readiness: track widths, clearances, drill sizes, footprint accuracy, placement, copper areas, layer stack-up, and mounting holes—all per PCBWay’s standard capabilities. If you spot any DRC conflicts or optimisation opportunities, please document them and suggest precise fixes. Deliverables • Annotated copy of the PCB file (or PDF/PNG screenshots) marking every issue and recommended change. • Updated Gerber/NC drill set or clear written guidance so I can apply the fixes myself. • A brief summary confirming compliance with PCBWay tolerances and expected yield. If you can turn this around quickly and keep the feedback practical and concise, we’ll be a great fit.
Project ID: 40800039
94 proposals
Remote project
Active 11 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
94 freelancers are bidding on average $135 USD for this job

Greetings, Recently, I worked on a battery-powered sensor board using ESP32 and STM32, handling 4-layer PCB layout, power circuits, component footprints, and manufacturing files in Altium. During testing, we found a few hardware issues related to component selection and footprints, so I know how important a proper review is before production. For your board, I'll check trace widths, clearances, vias, drill sizes, MOSFET switching paths, ESP32 antenna clearance, and PCBWay manufacturing requirements. I'll also review Gerbers and DRC results, then provide annotated screenshots with clear instructions for fixing any issues. I can deliver the initial findings within 24 hours and complete the full review in 2 days for $120. Can you share the TSCircuit source files and exported Gerbers? Sincerely, Oleksandr Gergel
$250 USD in 3 days
8.4
8.4

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with ESP32 hardware, MOSFET switching circuits and preparing PCB designs for manufacture, including consumer products from concept through production. I can review your TSCircuit layout against PCBWay’s standard fabrication and assembly capabilities, checking track widths, clearances, drills, footprints, placement, copper areas, stack-up and mounting holes. I’ll also pay particular attention to the ESP32 antenna keepout and the MOSFET’s current paths and thermal layout. You’ll receive annotated screenshots identifying each issue and its recommended fix, clear written guidance for correcting the layout and regenerating the Gerber/NC drill files, and a brief manufacturing-readiness summary covering compliance and any remaining yield risks. I’ll keep the feedback practical and concise, with critical fixes clearly distinguished from optional improvements. Please share the board files, intended stack-up and maximum switched current. I can complete the review within two days of receiving these. Please contact me to discuss details.
$225 USD in 2 days
7.6
7.6

My combination of PCB layout, power electronics, and ESP32 experience makes me well suited to review your board before fabrication. I have designed PCBs in Altium and EasyEDA, worked with manufacturer CAD files, and developed ESP32/ESP8266 embedded systems, giving me the practical perspective needed to assess both electrical layout quality and production readiness. My background includes DC-DC converters, AC/DC converters, SMPS and power boards, so I can give particular attention to the on-board MOSFET switcher, including current paths, track widths, copper areas, clearances, component placement, thermal considerations, and suitable grounding. My circuit design and schematic review experience also supports checking footprints, drill sizes, mounting holes, layer usage, and likely DRC or assembly concerns against PCBWay capabilities. I will provide concise annotated findings with precise corrective guidance, plus clear recommendations for the Gerber and NC drill output. I would be glad to give your ESP32 PCB a thorough manufacturing-readiness review before submission to PCBWay.
$100 USD in 3 days
7.5
7.5

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$140 USD in 7 days
7.5
7.5

I have been designing professional PCBs since last 10 years and using JLCPCB/PCBWay for many years now. I will use KiCad to design this board and accurately postion the components as per the image you provided. Let's get started.
$140 USD in 3 days
7.0
7.0

Reliable ESP32 and power-electronics PCB design is central to my work, including multilayer embedded-system boards, DC-DC and AC-DC power circuits, and RF layouts. I can review your TSCircuit board with particular attention to the on-board MOSFET switcher, ESP32/RF-sensitive placement, return paths, copper areas, and practical PCBWay manufacturing constraints. My PCB layout and circuit-design experience covers track widths, clearances, footprints, drill requirements, mounting details, layer-stack considerations, and fabrication readiness. I will identify DRC conflicts and layout risks, document each issue with annotated PCB views or screenshots, and provide precise corrections or clear guidance for applying them. My ESP32 experience also helps me assess Wi-Fi/Bluetooth-related layout concerns rather than treating the board as a purely mechanical review. I can deliver concise, practical feedback focused on preventing fabrication and assembly surprises, along with a clear summary of manufacturing compliance and any remaining recommendations. Choose me for a focused expert review before you release the design to PCBWay.
$200 USD in 1 day
6.9
6.9

Hi there, I carefully reviewed your ESP32 PCB review requirements, including the on-board MOSFET switching section and the need to verify track widths, clearances, drill sizes, footprints, copper areas, placement, mounting features, and overall PCBWay manufacturing readiness. I am a mechatronics engineer with almost half a decade of experience in embedded electronics, PCB design, power circuitry, hardware prototyping, and manufacturing preparation using Altium Designer. My background includes ESP32-class embedded systems, MOSFET-based circuitry, power distribution, component placement, routing, and DFM-oriented PCB development. Because PCB review, power electronics, and manufacturing preparation are already part of my core skillset, I can provide a practical second opinion focused on real fabrication or assembly risks rather than unnecessary redesign, with clear recommendations for any issues found. Please send me a message so we can discuss the project and start. Best regards, Samuel tshibangu
$140 USD in 1 day
6.5
6.5

Hi there I'm an Electronic Engineer with over 10 years experience designing embedded applications and their PCBs, you can learn more about me from my Freelancer Profile. How about a private message so we discuss how I can perform a derating analysis of your schematic and layout. Kind regards V.T.
$50 USD in 1 day
6.8
6.8

I have 8 years of experience in PCB design and hardware development, working with Altium Designer and KiCad. I have designed and reviewed multilayer PCBs, including ESP32-based products, power electronics, and MOSFET switching circuits. I can thoroughly review your TSCircuit PCB for track widths, clearances, drill sizes, footprints, component placement, copper areas, stack-up, mounting holes, and PCBWay manufacturing capabilities. I will document DRC issues, highlight optimisation opportunities, and provide precise recommendations to ensure manufacturing readiness. I can also share relevant PCB design samples and start immediately.
$140 USD in 7 days
6.6
6.6

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!
$230 USD in 7 days
6.0
6.0

Hello, My 10+ years in electronics and PCB design make me well suited to review your ESP32 board before fabrication, particularly where embedded hardware, power electronics, and manufacturing readiness overlap. I work across schematic review, PCB layout, component and footprint selection, design optimisation, DFM, prototyping, and manufacturing documentation. I can assess the physical design against PCBWay capabilities, including track widths, clearances, drill sizes, footprints, placement, copper areas, layer stack-up, and mounting holes. My ESP32, analog/digital electronics, power supply, and hardware troubleshooting experience also helps me identify practical risks around the on-board MOSFET switcher, connectivity, and assembly. I will provide concise annotated findings with precise recommended corrections, plus clear guidance for any Gerber or NC drill updates. I am ready to give your design a careful manufacturing-focused review and provide the practical feedback needed before submission to PCBWay. Thanks!
$155 USD in 4 days
5.7
5.7

Okay, I got what you want exactly. I am a Full Stack Engineer PCB Designer and Embedded Engineer with 10 years of experience, providing ESP32 hardware design, MOSFET power switching, PCB layout optimization, DRC verification, and manufacturing preparation. In my opinion, a thorough PCB review before fabrication can prevent costly assembly issues and unnecessary revisions. I will carefully inspect the layout against PCBWay's manufacturing capabilities, focusing on electrical clearances, track widths, drill sizes, footprints, copper distribution, and mechanical constraints. This project is very similar to my previous works. I have designed and reviewed ESP32-based embedded boards with switching power circuits, multilayer layouts, and compact component placement. I also have experience preparing fabrication-ready Gerbers, NC drill files, BOMs, and assembly documentation for PCB manufacturers. ✅ So, I will divide your project into three major steps. 1️⃣ Review the schematic, PCB layout, stack-up, and manufacturing constraints. 2️⃣ Identify DRC, DFM, placement, routing, and mechanical issues and recommend fixes. 3️⃣ Provide annotated review files, updated manufacturing outputs or correction instructions, and a concise readiness report. Via private chatting or meeting, I will provide the creative idea and good tech solution for your project. Best regards. Maksym
$100 USD in 2 days
5.5
5.5

Hello sir, With a M.Sc. in Power Electronics, I can help you with the technical expertise to develop your PCB. I specialize in the full development schematic capture and component selection to layout, thermal management, and physical fabrication. My background in power electronics includes power converters, motor control, and on-grid applications. With my previous experience in designing and fabricating multiple custom PCBs, I deliver clean, production-ready Gerber files, BOMs, and documentation on time. I would love to discuss your project requirements and bring your circuit from concept to prototype! Best regards, Alaa.
$250 USD in 3 days
5.7
5.7

Hello, I’m an Electrical/Electronics Engineer with 15+ years of experience in PCB design, embedded systems, power electronics, and hardware development. I can perform a detailed review of your ESP32 PCB layout, focusing on track widths, clearances, via and drill sizes, footprint accuracy, component placement, copper pours, layer stack-up, mounting holes, and MOSFET switching circuitry. I use Easyeda,Altium Designer and Proteus and can review your manufacturing files against PCBWay capabilities, identify DRC issues, and recommend precise layout improvements. I will provide annotated screenshots, a documented list of issues and fixes, and updated Gerber/NC drill files if required. I can start as soon as you share the TSCircuit project and board specifications. Best regards, Hamza
$70 USD in 4 days
5.4
5.4

PCB layout review is directly covered by my Circuit Design, Electronics, and PCB Layout skills, making me well suited to inspect your ESP32 board before fabrication. I can review the physical design for track widths, clearances, drill sizes, footprint accuracy, component placement, copper areas, layer stack-up, mounting holes, and DRC-related concerns against PCBWay’s standard manufacturing capabilities. My background also includes CAD, drafting, 3D modeling, and technical design, which supports careful inspection of footprints, board geometry, and fabrication-ready details. I will provide practical annotations on the PCB file or clear PDF/PNG screenshots, document each issue with a precise recommended correction, and include written guidance for the Gerber/NC drill export or updated files where appropriate. I will keep the review concise and focused on preventing manufacturing and assembly surprises. Choose me for a thorough, practical PCB layout check before you submit the board to PCBWay.
$51 USD in 1 day
5.2
5.2

PCB layout and electrical engineering are established parts of my skill set, making me well suited to review your ESP32 board before fabrication. I can assess the TSCircuit layout for track widths, clearances, drill sizes, footprints, component placement, copper areas, layer stack-up, and mounting holes against PCBWay’s standard manufacturing capabilities. My background also includes control engineering, PLC design, computational analysis, and technical documentation, allowing me to evaluate both electrical practicality and manufacturing readiness. I can identify DRC conflicts and layout risks, annotate each issue with a precise recommended correction, and provide clear guidance for applying fixes or preparing the Gerber and NC drill files. I will keep the review practical and concise, with a focused summary of PCBWay tolerance compliance and potential yield concerns. Choose me for a careful, engineering-focused final review before your board goes to production.
$150 USD in 3 days
5.0
5.0

Hi, I am ready to review your ESP32 PCB layout for manufacturing readiness, focusing on track widths, clearances, footprint accuracy, component placement, and copper areas, following IPC-2221, IPC-7351, IPC-6012, and IPC-A-600 standards for a smooth, high-yield assembly process. Project Deliverables: Annotated copy of the PCB file (or PDF/PNG screenshots) marking every issue and recommended change. Updated Gerber/NC drill set or clear written guidance so client can apply the fixes. A brief summary confirming compliance with PCBWay tolerances and expected yield. I have a few questions: Q1: Could you share the TSCircuit design files (or exported Gerbers) and confirm if you are using PCBWay’s standard 1.6mm FR4 stack-up? Q2: Do you have any specific concerns about the MOSFET switcher placement or copper area for thermal dissipation that you want me to prioritize? Over 8 years of experience in PCB layout review and manufacturing readiness. Similar projects I have done: ESP32 PCB Layout Review with DFM Audit and PCBWay Compliance Power-Switching PCB Review with Thermal Copper Analysis and DRC Fixes Software I can use: Altium Designer/KiCad I am ready to start immediately. Thank You! Warm regards, Abubakar
$140 USD in 7 days
5.1
5.1

Custom IoT hardware, PCB design, and ESP32/STM32 firmware are core parts of my work, making me well suited to review your ESP32 board before fabrication. My background in circuit design, electrical engineering, electronics, and PCB layout allows me to assess the complete physical design—not just whether the schematic is electrically correct. Recently completed work similar to your projcts: https://www.freelancer.com/projects/electronics/KiCad-PCB-Layout-Optimization/reviews I can examine the MOSFET switcher layout, routing, clearances, track widths, copper areas, footprints, drill sizes, mounting holes, layer stack-up, and DRC issues against PCBWay’s standard manufacturing capabilities. I will provide practical annotations with precise recommended changes, along with clear guidance for updating the Gerber and NC drill outputs. My custom IoT hardware experience also helps me evaluate the board as a manufacturable assembly rather than only as a drawing. I’m ready to give your TSCircuit design a concise, expert manufacturing-readiness review before you submit it to PCBWay.
$140 USD in 7 days
5.2
5.2

This is not an AI-generated bid like all the others I saw. As you can see in my portfolio on my profile, I have extensive experience designing PCBs and mass production equipment, just like you need. I can handle your project. I apologize for the simple proposal; I know you're probably tired of reading AI-generated proposals, and I'd rather not waste time on that. If you're interested in working with me, send me a message and we can work out the details! Best Regards!
$50 USD in 7 days
4.8
4.8

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq
$140 USD in 7 days
5.3
5.3

Glendale, United States
Payment method verified
Member since Jul 21, 2020
$1500-3000 USD
$30-250 USD
$10-30 USD
$10-30 USD
$30-250 USD
£20-250 GBP
€12-18 EUR / hour
$30-250 USD
$30-250 USD
$10-30 USD
£20-250 GBP
$30-250 USD
£250-750 GBP
$1500-3000 USD
£20-50 GBP
$1500-3000 USD
€30-250 EUR
₹150000-250000 INR
₹1500-12500 INR
₹600-1500 INR
$250-750 USD
₹1500-12500 INR
₹37500-75000 INR
₹750-1250 INR / hour
$25-50 AUD / hour