Kinco MK070E-33DT HMI + PLC Programming for Tank Level Control with VSD

@tshibsamuel477

Hi there, I’ve carefully read your project description and I fully understand your goal: developing a complete HMI + PLC solution on the Kinco MK070E-33DT for reliable tank level control with proper automation, scaling, and operator interaction. This fits my skillset very well. With my background in mechatronics and industrial automation, I have strong experience with PLC ladder programming, HMI design, analog signal scaling (4–20mA), VSD control, and sensor integration. I can implement stable Auto/Manual logic with proper hysteresis, clean pump control, and fault handling. I can deliver a well-structured KincoBuilder PLC program and a clean, user-friendly HMI in DTools, including accurate level scaling (0–1.2m and %), clear status visualization, and intuitive controls. The code will be organized and documented so it’s easy to maintain and adjust. Given my experience, I’m confident I can complete this efficiently and professionally. Just send me a message and we can get started right away. Best regards, Samuel Tshibangu

@HafizAhmad5358

Hi, I can develop the complete PLC and HMI solution for your tank level control system using the Kinco MK070E-33DT. I have experience with PLC-based level control systems, including analog scaling (4–20mA), pump control, VFD integration, and Auto/Manual operation logic. I will implement clean, structured ladder logic in KincoBuilder, including input mapping, scaling (0–1.2m and %), pump start/stop with hysteresis, and stable control of the Vacon 20 drive. For the HMI (DTools), I will design a clean and user-friendly interface showing tank level (meters and %), raw values, pump status, high/low level indication, faults, and operator controls such as Auto/Manual, Start/Stop, Reset, and speed setpoint. Importantly, I also have a physical Kinco PLC + HMI setup available, so I can test the logic on real hardware—not just simulation. This helps ensure reliable behavior before delivery. You will receive: • KincoBuilder PLC project • DTools HMI project • Complete I/O and tag mapping • Simple documentation for operation and adjustments Once you share any specific configuration details, I can start immediately and ensure smooth commissioning. Regards, Hafiz Ahmad

@stolzenterprises

The professional with 16 years of experience in Industrial Automation. ^^Development,Commissioning of PLC Control System, HMI and SCADA^^ ◾PLC- Siemens [S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!] Rockwell [(Allen Bradley)- SLC500,MicroLogix,CompactLogix.] Schneider [Zelio, M171/72] Automation Direct [DirectLogic Click PLC] Unitronic [V200-18-E3XB Controller] Delta [Delta DVP ES2] Click [C2 series] ◾HMI- Siemens ** Weintek ** Kinco ** Unitronics ** Hitachi ** Schneider ** Wecon ** DeepSeaElectronics** EZ Automation**Maple ◾SCADA - WinCC ** In-Touch Wonderware ** Citect ** Ignition ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss, Hitachi ◾ Industrial Networks- PPI-MPI ** Profibus ** AS-i ** Profinet ** Ethernet ** Modbus RTU/Modbus TCP ◾ OPC - PC Access ** OPC Scout ** OPCUA ** Metrikon ** Kepware ◾ Project Documentation- ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP. ◾ Programming Languages - C# ** VBA ** VB.net ** Javascript ** Python ◾ Arduino Uno ** RS485 ** Ethernet shield ** Data Logging ◾Raspberry pi ** Raspi Camera ? Networking Devices - Siemens ** Teltonika ◾OT Cybersecurity ? NIS2 Compliance **NO OFFSITE COMMUNICATIONS**

@engabdo172

Hello sir I'm PLC programmer with 10 years of experience in the automation field I have good experience with kinco PLC and Hmi and I do alot of jobs using it I have kinco builder and Dtool for hmi installed on my PC and I can start working from now Please contact me for more detailes I hope we can work together Best regards

@tymoteuszs52

Hello, Drawing from my extensive experience as a Senior Full Stack Developer, I believe I am a prime candidate to fulfill your industrial automation needs. My skillset aligns directly with your project requirements, ranging from proficiency in HMI programming with tools such as Kinco DTools and PLC development using KincoBuilder, to overseeing cloud-native backend solutions - critical for handling and analyzing the vast amount of data required for tank level control. During my time at Tech Innovators, I spearheaded the development of a microservices-based platform that streamlined business operations for numerous clients across different industries. This involved designing and implementing robust REST APIs, an aspect that will be vital in facilitating seamless communication between components of your control system. Furthermore, this experience honed my problem-solving capabilities, ensuring any issues identified during the process could be rectified promptly and efficiently. In conclusion, I offer you not only the technical expertise to handle your project's stacked requirements but also a proven dedication to delivering on time and meeting client objectives. Combining my skills in both frontend and backend technologies with a thorough understanding of industrial automation guarantees you a clean, maintainable solution built specifically to your needs. Together we can successfully bring your vision of efficient tank level control Thanks!

@OBRY8246

Dear Client, I am excited about the opportunity to develop an HMI and PLC solution for your tank level control system using the Kinco MK070E-33DT. With my extensive experience in industrial automation and control systems, I can provide you with a comprehensive solution that meets all your requirements. For this project, I will design a ladder logic PLC program that appropriately integrates the ultrasonic level sensor and the Vacon 20 VSD to control pump operations efficiently. The system will include auto and manual modes allowing for user flexibility. I will also ensure the HMI displays all necessary parameters, including tank levels, pump status, and fault indications, in a clean and user-friendly manner. Additionally, I will deliver the necessary documentation to guide you on system adjustments and maintenance. Could you tell me more about any specific design preferences you have for the HMI interface? I am confident that my approach will provide a robust and reliable system. I look forward to discussing this further with you. Thanks,

@aleksk49

Hello, As a seasoned industrial automation engineer, my skills align perfectly with your project requirements. I've completed numerous projects like yours and have the necessary expertise in programming HMIs and PLCs, especially with the Kinco MK070E-33DT. I am proficient in KincoBuilder and Kinco DTools, and will create an intuitive, efficient tank level control system for you. Additionally, I have extensive experience working with various inputs and outputs - RS485, 4-20mA, analog signals, and relay outputs - just like your project needs. My control logic implementation ensures a reliable, efficient operation of interconnected systems such as the ultrasonic sensor, the level transmitter, and the Vacon 20 VSD. Using kincoBuilder's ladder logic programming capabilities coupled with my fault handling experience will guarantee a robust output. Besides delivering robust hardware solutions, my documentation skills are top-notch to ensure seamless operator engagement , clearly explaining system functionality, modifying scaling values, and setpoints adjustments. With me on board, expect not only a well-executed system but a comprehensive user guide empowering operator interactions with your new tank control system. Let's get this system up and running optimally! Thanks!

@haseebsidd07

Hey , I just went through the project description, and I see you are looking for someone experienced in Simulation, PLC, Electronics, Engineering, Instrumentation, Electrical Engineering, Automation and Microcontroller. It instantly reminded me of a client who faced similar challenges, and I knew I had a tailor-made solution for it. Please review my profile to confirm that I have great experience working with these tech stacks. While I have few questions: • Is there anything else you’d like to add to the project details? • What’s the top hurdle you’re facing with this project? • What is the timeline to get this done? Why Choose Me? 250+ Projects. 5 Years. Zero Misses. My reputation is built on a single metric: Flawless Execution. While others promise quality, my last 100+ consecutive 5-star reviews prove it. I don’t just finish the job; I set the standard. Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) The portfolio here is just the tip of the iceberg. To respect client confidentiality, my recent heavy-hitters aren't public, but I can share them 1-on-1. Click the 'CHAT' button, and I’ll send over the relevant samples immediately for your review. Regards, Abdul Haseeb Siddiqui.

@letswork92

I understand that you need a comprehensive HMI and PLC solution for your tank level control system using the Kinco MK070E-33DT unit. Effective management of tank levels is crucial for operational efficiency, and your requirements highlight the importance of precise control over pump operations. With over 12 years of experience in industrial automation, I specialize in developing tailored automation solutions that incorporate technologies such as ladder logic programming and user-friendly HMI interfaces with Kinco DTools. The integration of ultrasonic sensors and Vacon 20 VSD into the system will be executed to ensure seamless communication and reliable operation. I will provide thorough documentation along with project files, ensuring that your team understands how to manage scaling values and modify setpoints effectively. Could you clarify if there are any specific safety protocols or compliance standards we should adhere to during development?

@manoval09

Your ultrasonic sensor and VSD integration needs PLC logic that reliably switches the pump based on tank levels while displaying live data on the HMI. I'll program the Kinco MK070E-33DT to handle the 4–20mA analog inputs, relay outputs for level detection, and 0–10V speed control to the Vacon drive. $55, 5 days. Best regards, Val

@MarcusCMP

Hey — saw your post about the Kinco MK070E-33DT HMI + PLC programming for tank level control with VSD. Getting the level logic, VSD control, and alarms all talking cleanly without weird trips or hunting is usually where these systems get painful. Quick question before I suggest an approach: Do you already have a defined control philosophy (setpoints, interlocks, fail-safe states), or does that still need to be designed? I’ve done similar HMI + PLC setups with VSD-based level control, including analog signal scaling, PID tuning, and clear operator screens for maintenance teams. If you can share your P&ID, I/O list, or any existing PLC/HMI files, I’ll review them and tell you what’s realistic within your timeline and hardware limits.