Design of Control Device with LCD

Job Description:

The preliminar idea of the project is to buid a device based on a STM32, that controls a 4 inch LCD screen with RGB interface, with 2 to 4 serial data signals and 4 to 8 buttons. Design using easyEDA and prototypes made by jlcpcb. All this can be modified by designer advice. The work is design and test of the PCB.

More details:

- The work is to design PCB and schematic

- The circuit has a 12V power source

- The LCD is not deciced, but has to be high bright, problably RGB888, to be decided

- The serial data bus is CAN

- The LCD probably has a backlight power voltage of about 15v

- I decided to use easyEDA because I know it, but also to be decided

- I decided to use STM32 because it has support for CAN bus and RGB888, but again to be decided


Taidot: Piirilevyn asettelu, Elektroniikka, Mikrocontroller, Sähkötekniikka, Piirisuunnittelu

Tietoa asiakkaasta:
( 0 arvostelua ) Canillo, Andorra

Projektin tunnus: #36198364

31 freelanceria on tarjonnut keskimäärin $174 tähän työhön


Hello, thank you for your job posting read your description about-Control device am a senior electrical engineer. have plenty of experience in firmware development and micro-controller developments. can write the firmw Lisää

$30 USD 1 päivässä
(212 arvostelua)

-------------------------------PCB Designing---------------------------------- Greetings, I have read and understood your requirements, you need someone expert in PCB designing. I am an electronics engineer and exper Lisää

$140 USD 7 päivässä
(170 arvostelua)

Since 2003 I am working in Digital Electronic. So more than 18 years of experience in Electronics. Arduino NANO/UNO/MEGA, ESP32 and Raspberry PI to build a digital device to read sensor data and send it to the web serv Lisää

$750 USD 7 päivässä
(12 arvostelua)

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries Lisää

$250 USD 7 päivässä
(59 arvostelua)

Greetings thanks for posting the project there i am electrical engineer i have expertise in embedded firmware development, PCB designing and circuit designing. I can work on latest engineering tools to complete your ta Lisää

$150 USD 7 päivässä
(38 arvostelua)

Good day, I have 30 years of experience in Electronics Control Device and I can help to design and test of the PCB. I can design control Device based on a STM32, that controls a 4 inch LCD screen with RGB interface, wi Lisää

$140 USD 2 päivässä
(5 arvostelua)

Hi, THere. Which st MCU are u willing to use? can we use jlc smt as well as outside like digikey? also would it be possible to use microchip mcu it's cheap

$250 USD 7 päivässä
(20 arvostelua)

Hi, good afternoon, I am an Electronics Engineer specializing in Embedded systems and PCB design having more than 4 years of design experience in the PCB industry. I am proficient in using several EDA tools, such as Ea Lisää

$140 USD 7 päivässä
(8 arvostelua)

Hi, I am excited to submit my proposal for the PCB designer position you have advertised. With over 6 years of experience in the industry, I have extensive knowledge and skills in designing PCB layouts and creating man Lisää

$140 USD 7 päivässä
(8 arvostelua)

I am a mechatronics engineer, have sufficient experience in embedded systems, electronics, PCB design, STM32, LCD, EasyEDA, and C/C++ programming, do not hesitate to send me soon.

$50 USD 1 päivässä
(10 arvostelua)

Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, D Lisää

$140 USD 7 päivässä
(4 arvostelua)

HELLO; I am working as a research and development manager in a private company. I have more than 5 years of experience in embedded system software and hardware. As for software, I am proficient in microcontrollers such Lisää

$215 USD 21 päivässä
(8 arvostelua)

Hi need more information about the project, what to show on the screen and how to control the RGB leds also buttons I can design schematic, PCB and write the firmware for you, after building the circuit and testing it Lisää

$150 USD 9 päivässä
(11 arvostelua)

Hello mate, I read your project description for Design of Control Device with LCD. Please send me all details I ready to start work on your project right now. Here my portfolio you can check: https://www.freelancer.c Lisää

$55 USD 1 päivässä
(2 arvostelua)

Hello I have many experiences working for 4+ years with Circuit design, Sensors & Embedded systems developments. I have experience practical and theoretical in implementation different control devices I do design contr Lisää

$150 USD 3 päivässä
(1 arvostelu)

Hello, thank you for your job posting. I read your description and understood. I am a senior electrical engineer. ☑️ I can design the circuit by the Altium,Easy EDA, Eagle, KiCAD, Allegro & OrCAD, PADs. ☑️ I provide th Lisää

$140 USD 7 päivässä
(1 arvostelu)

Based on my experience and skills, I believe that I am an excellent fit for the job of designing and testing the PCB for the device. I have a strong background in working with the STM32 microcontroller and I am familia Lisää

$100 USD 7 päivässä
(1 arvostelu)

Andorra, this is the first time I saw a bid from this country. Have you selected the STM32 MCU yet? When you say Serial data you mean UART, correct? What is the application for this device?

$30 USD 1 päivässä
(5 arvostelua)

I am mechantronics engineer from Việt Nam with 5+ years of experience in designing PCBs. I am familiar with various CAD tools including tools preferred by Manufacturers. I am interested in doing this project with you. Lisää

$30 USD 1 päivässä
(2 arvostelua)

Hi Sir, How are you. I have read your project description and I can do this task of Electrical Engineering, Microcontroller, Electronics, Circuit Design and PCB Layout. Let us discuss. Please have a look on my profile Lisää

$180 USD 3 päivässä
(1 arvostelu)