Runway LED PCB & Firmware

@amelectronics

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.

@macroenergy

With extensive knowledge and experience in Digital Motor Control, Analog Design, Electronic Design, Power Electronics, Renewable Energy and PCB design in order to drive your project. I’m well-versed with designing for challenging environments just like yours. I'll make sure the components are weatherproof and properly spaced for open-field installations. I prioritise 6.6 A current handling without flicker or thermal runaway, which is crucial for airfield CCR level operation. I propose to utilise Altium or KiCad (your preference) to produce a reliable PCB layout. In addition, my expertise in C/C++ programming with STM32 or PIC microcontrollers means I can comprehensively develop and document the firmware that recognizes and responds to CCR step changes. I understand that your lamp must track mandated brightness levels meticulously. My skills will ensure a seamless transition across the typical 6-step dimming. Finally, I commit to providing detailed records of gerbers, BOM (with manufacturer part numbers), compiled firmware, and source code. To complement this professional service, all design files will be reviewed by me personally before any proto-typing takes place; ensuring compliance with the 6.6 A CCR interface and outdoor durability standards. The solution for optimum brightness across all CCR steps will be validated on the proto-type before handing over files and accompanying documents to você "without" a hitch!

@tshibsamuel477

Hi there, I carefully reviewed your requirements for the complete outdoor runway-light electronics, including the 6.6 A CCR interface, LED driver stage, four-layer PCB, and embedded firmware. I have experience with the technologies and component types involved in this project, including high-current power electronics, constant-current LED control, STM32/PIC-class MCUs, current/voltage sensing, PWM control, thermal management, and multilayer PCB design using Altium Designer and KiCad. I can handle the complete development cycle: schematic design, PCB layout, component/BOM selection, CCR step detection, brightness-control firmware, and production documentation. Particular attention will be given to thermal performance, current handling, protection, outdoor reliability, and stable operation across all CCR brightness steps. Given my combined hardware and embedded-development background, I can move quickly while keeping the design production-ready and well documented. Just send me a message with the LED specifications and CCR interface details, and I can get started. Best regards, Samuel tshibangu

@Amidst

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!

@hayteekeys

HI, KINDLY READ THROUGH MY PROPOSAL I will design the complete outdoor runway light system electronic schematic, PCB layout and embedded firmware that reliably drives a high-brightness LED array from a standard 6.6 A airfield CCR while supporting multi-step dimming. MY APPROACH ✅ Confirm LED string characteristics and thermal requirements ✅ Design a robust four-layer PCB with proper high-current handling, weather-resistant component selection and outdoor track spacing ✅ Develop firmware that detects CCR step changes and accurately PWM-dims the LEDs ✅ Deliver full manufacturing package and clean, well-documented source code DELIVERABLES - Schematic and PCB source files (Altium or KiCad) - Gerbers, BOM with manufacturer part numbers - Compiled firmware + source code - Brief design and test documentation QUESTIONS 1. Preferred MCU family (STM32, PIC, etc.)? 2. Target LED forward voltage / number of LEDs in the string? Ready to start immediately.

@debosx

Hello! I'm a highly skilled PCB Designer with over 10 years of expertise in delivering reliable and efficient PCB designs. I specialize in creating precision designs tailored to client's needs, utilizing top-tier design tools such as Altium Designer, Autodesk Eagle, KiCad, EasyEDA, Siemens PADS, DipTrace, Allegro/OrCAD, Fritzing and Proteus. My goal is always to ensure the highest quality and performance in every project. Core Expertise : • Schematic Capture & Layout Design • Component Selection & Library Management • Reverse Engineering (PCB Replication, PCB Cloning) • Gerber, BOM, and CPL File Generation & Manufacturing Support • Design for Manufacturability (DFM) and Design for Assembly (DFA) • PCB Design & Development (Single, Double, Multi-Layer, Flexible PCBs) Industries Served : • Medical Devices • Telecommunications • Consumer Electronics • Industrial Equipment • Automotive Electronics • Safety and Security Devices Why Choose Me? • Attention to Detail and Commitment to Quality • Strong Communication Skills & Client-Centric Focus • Timely Delivery & Flexible Approach to Meet Project Requirements I would love to help you with your next PCB design project. Feel free to reach out, and let’s discuss how I can bring your ideas to life! Best Regards, Utpal

@cesur135

With a rich and extensive background in industrial automation, I believe my skills perfectly align with the demands of your project on runway LED PCB and firmware. My span of work includes successful completion of comprehensive automation projects such as the Wastewater and Water Treatment Plant Automation, Chocolate Machines Setup & Commissioning, Electrical Panels Design and Field Applications. In these projects, I have demonstrated my prowess in utilizing Altium and KiCad for schematic production as well as an adept understanding of C/C++ programming on MCUs like STM32 and PIC. Moreover, my proficiency and dedication to yield highly efficient designs ensure that your core requirements; reliable 6.6 A current handling without flicker or thermal runaway, weather-proof component selection and track spacing suitable for open-field installation, a firmware that recognizes CCR step changes; will be met enthusiastically. Compiling with your acceptance criteria, I will meticulously review design files making sure they are compliant with the 6.6 A CCR interface and outdoor durability standards while running several prototype tests to ascertain brightness stability across all CCR steps. With me on board, you're guaranteed thorough delivery from gerbers, BOM with manufacturer part numbers, compiled firmware, to the source code - all aligned with your timeframe. Let's build reliable yet brilliant runways!

@mahmoudralizadeh

Hello, I’m a Senior Electronics & Embedded Engineer with a Master’s degree in Electrical/Electronics Engineering and over 8 years of experience in electronics design and development. My core expertise includes: • Analog and digital circuit design • Embedded systems and firmware development using STM32, ESP32, and microcontrollers • FPGA and VHDL development • DC-DC and DC-AC converter design • Power electronics and power supply design • PCB design using Altium Designer • Signal processing and hardware development • Circuit simulation using LTspice and PSpice • Hardware debugging, testing, and optimization I can handle projects from requirements analysis and initial concept through circuit design, simulation, PCB design, firmware development, prototyping, testing, and final documentation. My focus is on delivering practical, reliable, and production-oriented engineering solutions that meet project requirements and real-world constraints. Examples of my previous projects and technical work are available in my portfolio, where you can review my experience and capabilities.

@alluankit01

Hi, I can support the runway LED PCB and firmware design, including schematic, 4-layer PCB layout, CCR step detection logic, BOM, Gerbers, and embedded C/C++ firmware. My approach will be to first confirm the LED string voltage/current profile, CCR interface behavior, thermal limits, enclosure/weatherproofing requirements, MCU choice, and brightness-step logic. Then I’ll design the power/control electronics and firmware around reliable 6.6A current handling and stable dimming. I can help with: * LED driver/control circuit design * 6.6A CCR interface review * STM32/PIC firmware * CCR step detection * PWM dimming logic * 4-layer PCB layout * Outdoor component selection * Thermal and spacing review * BOM and Gerber preparation * Firmware source and binary delivery Deliverables: * Schematic * PCB layout files * Gerbers and drill files * BOM with MPNs * Firmware source code * Compiled firmware * Brightness-step logic documentation * Bring-up/test notes I’ll focus on a robust prototype-ready design with stable brightness response, clean firmware, and manufacturable PCB files. Final airfield certification/compliance testing should be handled through the required aviation approval process. Best regards Ankit

@rfandelectronics

As a highly experienced RF and Electronics Engineer, I believe my skills and expertise make me an ideal candidate for your Runway LED PCB & Firmware project. With specialized knowledge in high-frequency systems, microwave engineering, and advanced electronics design - I am uniquely equipped to handle the complexity of your project. My proficiency in KiCad, Proteus, and Altium Designer ensures that I can offer you comprehensive PCB design and layout solutions. Alongside this, I have a deep understanding of embedded systems development along with programming languages like C/C++. Past work with ARM-based MCUs like STM32 will be advantageous for effectively developing and documenting the necessary firmware for your project. Building on these practical experiences is my academic background which means that my focus will not merely be on completing the project but ensuring that every aspect is well-researched and optimized to produce reliable results. With a project of this nature, adaptability to open-field circumstances becomes crucial - over my years of practice in RF and Microwave Engineering, weather-proofing projects has been a norm. As such, I can confidently assure you of an implementation that factors in all necessary considerations to ensure the required 6.6 A current handling without flicker or thermal runaway.

@bojans9

Hi, I can handle the complete runway LED controller design from schematic and 4-layer PCB through embedded firmware. I can deliver: * High-current LED/CCR interface designed for 6.6 A operation * Thermal and power integrity analysis * Outdoor-rated component and PCB design considerations * Altium/KiCad 4-layer PCB layout * MCU firmware in C/C++ for CCR step detection and 6-level brightness control * Stable PWM dimming without flicker * Protection, filtering and reliable signal conditioning * Complete Gerbers, BOM with manufacturer part numbers * Compiled firmware, source code and design documentation I’ll validate the current/voltage requirements and CCR interface before finalizing the power and sensing stages. **Budget:** ₹37,500 fixed **Timeline:** 3–4 weeks I can start with the LED/CCR electrical requirements and thermal calculations, then proceed to schematic, PCB and firmware.

@Hmdlawal

With over 6 years of experience and an impressive track record of over 120 successful projects, I have the expertise and technical know-how required for a project of this scale. I’m deeply familiar with Altium and KiCad, which are your preferred tools for schematic design and PCB layout. Moreover, my skills in C/C++ firmware development on microcontrollers like STM32 make me confident in delivering a robust, efficient system that suits your needs. At the heart of my process is customer satisfaction: I diligently review requirements, highlight potential risks and suggest trade-offs early on to avoid any surprises down the line. For you, it means we start on the same page, waste little time in getting the design underway, and ultimately deliver a solution that's compliant with your strict safety standards. Lastly, my familiarity with outdoor hardware and expertise in thermal management will come in handy in ensuring your product's durability as well as preventing thermal runaway or other issues commonly encountered in extreme weather conditions featured by airfields. Let's not forget my work dealing with pinnacle aspects like wireless communication networks (Wi-Fi , BLE et cetra) on IoT devices also aligns flawlessly to this project' future-proof approach.

@antoniod83

Hello, I’m interested in developing the complete runway light system, including the schematic, 4-layer PCB and embedded firmware. I have experience in PCB design, STM32-based embedded systems, power electronics, high-current routing, LED control and thermal considerations. I can design the 6.6A CCR interface with reliable current handling, proper protection, grounding, thermal management and outdoor-rated components. I can also develop firmware in C/C++ to detect CCR step changes and control the LED brightness through PWM across the required dimming levels. I will provide the complete KiCad/Altium source files, Gerbers, BOM with manufacturer part numbers, compiled firmware and documented source code. I’m available to start immediately.

@poojitham18

Hi i have more than12 years experienced in circuit design and development in my past i have designed lot of electronic project for companies i can design best way under emimec

@anjalio22

I would appreciate the opportunity to handle your Runway LED PCB & Firmware project. I have experience in PCB design, embedded systems, power electronics, and firmware development, with strong knowledge of KiCad/Altium and STM32/PIC-based solutions. I can handle the complete design cycle, including: • LED string and 6.6 A CCR interface analysis • Four-layer schematic and PCB layout with proper high-current routing, creepage/clearance, grounding, and thermal management • Outdoor-rated component selection for reliable field operation • MCU firmware to detect CCR step changes and implement stable 6-step brightness control • PWM control, protection, fault handling, and brightness stability • Complete BOM with manufacturer part numbers, Gerbers, source code, and compiled firmware I will focus on reliable current handling, thermal performance, EMI considerations, and consistent brightness across all CCR levels. I will also ensure the firmware is clean, documented, and compiles without warnings. Give me one opportunity to work on your project, and I will deliver accurate, professional, and thoroughly documented results within the agreed timeline.

@moaath32010

Hi, I can handle the complete hardware and firmware design cycle for your outdoor 6.6 A CCR-driven runway light. ​Core Qualifications ​4-Layer PCB & Thermal Layout: Proficient in KiCad for high-power, multi-layer designs. Experienced in current density planning for 6.6 A continuous loads, heavy-copper traces, thermal via arrays for high-brightness LED cooling, and IPC-2221 creepage/clearance for outdoor field conditions. ​CCR Sensing Front-End: Direct experience designing isolated current-sensing circuits (CT/shunt with low-pass filtering and surge protection) to accurately detect 6.6 A RMS step changes without flicker or thermal runaway. ​Firmware (STM32 / PIC C/C++): Skilled in developing fast, warning-free ADC sampling pipelines, digital filtering algorithms for noisy power inputs, and smooth hardware PWM dimming tuned to standard 6-step airfield CCR curves. ​Key Deliverables ​Schematics & PCB Layout: Full 4-layer source files (Altium or KiCad), Gerber/NC Drill manufacturing package (RS-274X), assembly drawings, and thermal modeling notes. ​Manufacturing BOM: Itemized BOM with active Manufacturer Part Numbers (MPNs) rated for industrial/outdoor temperature ranges. ​Firmware Package: Fully documented C/C++ source code (compiles cleanly with zero warnings), compiled .hex/.bin files, and step-dimming mapping documentation. ​I can review your LED string specs and target enclosure dimensions immediately. Let’s connect in chat to confirm MCU preferences and launch the project

@bhargav922002

Hello, I’m Bhargav, with a decade of experience in electrical engineering, focusing on projects like yours. I specialize in designing complex PCBs and firmware, ensuring high performance and reliability. I understand your requirements for the outdoor runway light project. I will create a robust electronic schematic, design the PCB for high-brightness LED arrays, and develop firmware that seamlessly interacts with the constant-current regulator. The project will include verifying all components meet outdoor durability standards, ensuring reliable 6.6 A performance without flickering, and compiling detailed documentation. Let's start a chat to discuss your specific needs and clarify any details.

@paulpham93

I bring comprehensive skills in PCB design and firmware development for outdoor embedded systems. My Upwork profile has earned over $300,000 with account Paul.P., demonstrating proven experience in electronics schematics, BOM analysis, and microcontroller firmware. I'll deliver a robust runway light PCB with reliable firmware for harsh environments. Best regards, Paul.

@ostronik

Hi, Greetings from OSTronik India! We are a technology-driven company specializing in Power Electronics and Embedded System Design integrated with Artificial Intelligence (AI) and Mobile Application Development, delivering reliable, industrial-grade electronic and software solutions—from concept to mass production, all under one roof. Our in-house capabilities include R&D, Firmware Development, Hardware Design, Mobile Application(Android & iOS), Prototyping, and Scalable Mass Production, with a strong focus on quality, performance, and cost efficiency. Core Expertise: • Microcontrollers: PIC, STM32, ESP Family, AVR. • Microprocessors: Raspberry Pi • Development Tools: MPLAB X IDE, STM32CubeIDE, Arduino IDE, Atmel Studio, VS Code • Hardware Design: Industrial-grade multilayer PCBs using Altium Designer with optimized power design, isolation handling, and EMI/EMC compliance • Communication Protocols: UART, SPI, I²C, CAN, Modbus, MQTT, LAN, S-Bus, RS-485 Mobile Application Capabilities: • Custom Android & iOS mobile applications for device control, monitoring, and data visualization • Real-time dashboards, cloud connectivity, and secure user authentication • Seamless integration between IoT platforms and mobile apps We have successfully transformed multiple concepts into market-ready electronic and mobile-enabled solutions. We would be glad to share a brief reference video. Let’s schedule a meeting to discuss your requirements in detail. Best Regards, Team OSTronik India