
Closed
Posted
Paid on delivery
BUDGET NOTICE: Any displayed budget is an administrative placeholder, not the project fee or a spending cap. Please propose your own realistic itemized price and schedule. No work or purchases are authorized by this posting. Funding and budget This project is personally funded, with no external funding and a very limited budget. We are looking for a small, specialised engineering company or a team operating under a registered legal entity, with relevant experience and access to suitable equipment. Please provide a realistic preliminary estimate of the total cost, including components, testing and external services. We are seeking an economical, documented implementation—not a low introductory price followed by unclear additional charges. Project objective Develop an owner-originated concept into an integrated physical wearable prototype intended to develop and test early warning of approaching syncope (fainting). We want one provider responsible for the complete engineering process: requirements review, electronics and software, experiments, troubleshooting, assembly, testing and delivery of the device and its development files. Signal recording supports the main objective; it is not a substitute for implementing and testing the agreed warning logic. This is a development prototype. Demonstrating warning performance in humans will require a separate, later validation stage. Required functions - Record ECG through at least one channel, optical pulse signals (PPG), and motion data needed to estimate body posture. - Provide raw ECG, PPG and motion data with verifiable synchronised timing. - Deliver a local on-body alert that does not depend on a nearby phone. - Store recordings and events locally. - Provide a practical way to review and export data; a full commercial app is not required. - Implement a documented version of the agreed warning logic, with its inputs and limitations clearly stated. - Deliver a compact, presentable wearable prototype without loose external wires during normal intended use. Initial limits for size, weight, operating time, attachment and recording capacity must be agreed before the relevant design stage is approved and finally priced. The design must address mechanical pressure while lying down, sweat, agreed thermal conditions, battery safety and skin-contact materials. Shower resistance must be assessed against defined test conditions and acceptance criteria. Swimming is outside the scope of the first version. Development approach Work begins with a small, fixed-price assignment to establish whether the measurement equipment and test method are suitable. The agreed hypothesis must then be tested and the results evaluated before committing to final miniaturisation and enclosure manufacture. Development boards may be used during early integration, but they are not the final deliverable. The provider must: Test the hypothesis, identify the cause of any failure—or explain what remains unknown—and propose a practical alternative within the available resources. Then test the approved modification against the baseline and report what improved, what deteriorated and what remains inconclusive. We welcome flexibility in implementation, with substantive changes approved in advance. We require reliable evidence, not a predetermined positive outcome. Raw recordings and failed or inconclusive attempts must also be delivered. A correctly conducted experiment with a negative result may fulfil an agreed research deliverable; it does not demonstrate successful device performance. No testing or wearing on humans, including the provider or its team members, is permitted within this engagement. Commercial medical certification and clinical validation are outside the scope. Provider qualifications Please demonstrate: - Relevant experience in wearable devices or physiological-signal measurement electronics. - Ability to build and deliver a complete physical prototype, rather than consultancy or theoretical design only. - Suitable measurement equipment, or documented access to a partner laboratory. - Ability to provide a dated, signed report identifying the responsible entity, personnel, equipment, settings, results and limitations. - Willingness to allow confidential review of the deliverables by specialists selected by the client. A CV or equipment list alone is insufficient. Please provide available, non-confidential evidence of relevant work and equipment access. Clearly distinguish equipment currently available from equipment that requires purchase or access that still needs arranging. Any subcontracted work must be disclosed. The contracting provider remains responsible for the integrated delivery. Deliverables - The agreed physical wearable prototype. - Editable design files, schematics and bill of materials. - Source code and instructions for building, programming and operating the system. - Raw data, test records and records of modifications. - Dated, signed reports documenting results, failures and remaining limitations. Rights and confidentiality The contract must provide for transfer to the client of rights in results developed specifically for this project, including designs, software, data, project-specific know-how, improvements and inventions arising from the work, with contributors documented in their correct capacities. Pre-existing intellectual property, third-party rights and the licences needed to use them and continue developing the device must be disclosed and agreed in advance. The provider must not file patent applications or register rights for itself or a third party based on project results or the client’s confidential information. Non-public details will be shared only after a signed non-disclosure agreement. Project details must not be published or included in a portfolio without written permission. We do not request inventive ideas, free detailed designs or new experiments as part of the application. Pricing, schedule and payment Please state: - Currency, estimated price per stage and estimated total cost. - Labour, components and external testing costs separately. - Taxes, platform fees, shipping and exclusions. - Price of the first integrated unit and manufacturing cost of an additional unit of the same design. - Included modification and re-testing cycles. - Expected start date, duration of each stage, and delivery dates for the integrated bench prototype and wearable prototype. - Major assumptions, dependencies and items that could change the estimate. Estimates provided before reviewing the confidential specification are preliminary and subject to written assumptions. The scope and fixed price of each stage must be agreed before it begins. Payments will follow agreed milestones, deliverables and acceptance criteria, using the platform’s authorised payment system when contracting through a platform. No additional work or purchases may be charged without prior written approval. Later stages require written authorisation to proceed. Please confirm that no applicable legal restrictions or sanctions prevent contracting, performing the work or receiving payment. Selected candidates will receive the complete terms document before submitting their final proposal and entering into a contract. Application questions Please begin your reply with brief answers: 1. What is the closest physical device your team has actually built? What was your role, and what non-confidential evidence can you provide? 2. Can you take responsibility for the complete implementation and delivery? Which tasks would be outsourced? 3. What measurement equipment is currently available, what evidence of access can you provide, and what is missing? 4. What is the most important issue that needs verification before you can commit? 5. What is your preliminary estimate of the total cost and duration, including assumptions and exclusions? 6. Do you accept starting with a limited, fixed-price measurement qualification stage, with subsequent stages authorised separately in writing? Communication is in writing only. This posting invites preliminary proposals; it does not accept an offer or authorise paid work.
Project ID: 40791816
28 proposals
Remote project
Active 7 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
28 freelancers are bidding on average $207 USD for this job

Greetings, I previously worked on a wearable sensor platform involving motion and biometric sensors, real-time data acquisition, and hardware debugging, as well as a vehicle measurement system involving sensor calibration and noise handling. My role covered firmware development, sensor integration, and testing on actual hardware, although I haven't performed this exact optical-vibration interference study. My proposed fixed-price breakdown is $250 for rig qualification (stop-cost cap), $300 for setup, $500 for controlled recordings and repeats, $450 for analysis and reporting, and $150 for parts, totaling $1,650 USD, with optional mitigation and retesting estimated at $600; qualification would take around 3 working days and the complete first stage around 10–14 working days after equipment access. I can start within 3 business days of agreement, but first need to confirm the exact optical, vibration, timing and reference instruments available, their calibration status, and any external costs or applicable taxes before making the quotation unconditional. I'll provide all raw recordings including failed runs, test documentation, a signed and attributable PDF report, and agreed confidential review rights, and I can also handle a later physical wearable prototype covering PCB design, firmware, and testing, with fabrication outsourced if needed. Sincerely, Oleksandr Gergel
$30 USD in 7 days
8.4
8.4

My Master’s in Embedded Systems and experience in biomedical instrumentation make me well suited to develop an integrated physiological-signal wearable prototype rather than provide consultancy alone. I can combine electronics, firmware, signal processing and mechanical enclosure design across the complete device. My expertise includes ECG/physiological measurement systems, STM32, ESP32 and Nordic nRF52/nRF53 platforms, embedded C/C++, RTOS, DMA and peripheral drivers. I can design the acquisition electronics and PCB, implement synchronized raw-data recording and local alert logic, and support practical export and review without making a phone connection essential. Signal processing and AI/ML experience also support documented warning logic with its inputs and limitations clearly identified. I can additionally model a compact custom housing in 3D CAD while addressing battery, skin-contact, pressure and environmental considerations within the agreed prototype scope. I am prepared to begin with the requested fixed-price measurement-equipment and hypothesis assessment, then provide documented results—including failed or inconclusive trials—before any further miniaturisation work. I would be glad to submit a transparent itemized estimate and schedule and take responsibility for delivering the complete physical prototype and development files.
$3,500 USD in 45 days
8.5
8.5

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$50 USD in 7 days
7.4
7.4

⭐⭐⭐⭐⭐ I find this project particularly interesting because it requires genuine engineering and experimental validation, not just assembling sensors into a wearable enclosure. I'd approach it in stages, starting with your fixed-price measurement qualification assignment. First, I'd evaluate ECG, PPG and motion-sensor suitability, signal quality, synchronization and the proposed measurement method before committing to miniaturization. The development would cover: • Integrated ECG, PPG and motion-sensing electronics. • Synchronized raw-data acquisition and local storage. • Embedded firmware and independent on-body alerts. • Documented warning logic with clearly stated limitations. • Compact wearable PCB, battery management and enclosure. • Baseline experiments, troubleshooting, modifications and comparative testing. All source files, schematics, BOMs, firmware, raw recordings, test results and technical reports would be included. Failed and inconclusive experiments would also be documented honestly. I fully respect your confidentiality, IP ownership and staged written-approval requirements. No human testing would be performed. I'd first like to review the NDA and discuss the measurement hypothesis, available test equipment and initial acceptance criteria before fixing the complete project price.
$10 USD in 1 day
5.8
5.8

Hello, I’m an Electrical/Electronics Engineer with 15+ years of experience in embedded systems, sensor integration, signal conditioning, vibration-related electronics, PCB design, and experimental testing. My proposed Stage 1 would establish a controlled bench-test plan, synchronized data acquisition, repeatable actuator on/off tests, independent reference checks, and documented analysis of interference and recovery behavior. I can develop the required electronics and firmware and provide raw data, test logs, setup documentation, and a versioned technical report. Before quoting a fixed price, I would need to confirm the optical sensor interface, available actuator, acquisition requirements, and equipment needed. I will clearly distinguish verified capabilities from proposed work and identify any equipment or external services required. Best regards, Hamza
$50 USD in 3 days
5.4
5.4

My physics research background in sensors, energy-harvesting devices, computational modeling, and data analysis is directly relevant to characterizing optical-sensor disturbance from a nearby actuator. I can contribute as a practical research and analysis specialist, focusing on controlled measurements, synchronized channels, repeatability, traceable run records, and defensible interpretation rather than assuming the hypotheses are correct. My expertise includes classical mechanics, electromagnetism, solid-state physics, MATLAB, OriginPro, Excel, and technical research documentation. This supports analysis of mechanical coupling, contact-related changes, electrical interference, post-stop behavior, timing, reference checks, and measurement limitations. I can prepare the written measurement plan, acceptance criteria, run/change logs, plots, reproducible analysis, and a dated versioned report that clearly distinguishes measured data from modeling or replay. I would be transparent about my role and any equipment or physical assembly capabilities not personally available, while documenting actual performers, tools, limitations, and required purchases. I can provide an itemized quotation for a bounded rig-qualification and analysis-focused engagement, and I would be pleased to support this carefully controlled bench study.
$1,000 USD in 45 days
5.0
5.0

Hi there! As you can see in my portfolio by visiting my profile, I have extensive experience in electronics development and even a project very similar to yours. This isn't an AI-generated bid; the rest is quite simple. I apologize for its simplicity, but I prefer to save time, and we can review your needs in detail if you contact me via message. Best Regards!!
$280 USD in 20 days
4.8
4.8

Hi there, I'm a senior mechanical engineer with extensive experience in machine and product design. You can see my portfolio. I'm ready to help you make: ✨ Written measurement plan and assembled test rig for synchronized optical and vibration data. ✨ Raw data runs, setup logs, and analysis distinguishing physical measurement from simulations. ✨ Dated, versioned PDF report detailing calibration, test methods, results, and limitations. ✨ SolidWorks 3D models and practical mechanical mitigation designs for the actuator. I'm excited to work with you on your project and deliver the best results possible. I'm waiting for your message.
$20 USD in 1 day
4.4
4.4

Hi there, Which optical sensor, actuator, controller, and existing reference instruments will be available for Stage 1? What alert-performance metric and post-stop recovery window should define acceptance? Which Stage 1 outcome would give you the strongest confidence to authorize mitigation testing? The study should separate mechanical coupling, contact variation, and electrical interference rather than treat them as one effect. I would define controlled runs, synchronized raw channels, independent references, repetitions, and traceable IDs before assembling the non-human bench rig. The main risk is false improvement caused by filtering, timing drift, weaker actuation, or excluded difficult runs. Fixed actuator settings, synchronization checks, blinded run comparisons, and complete retention of failed and negative runs would keep conclusions defensible. Before engagement, I would provide a factual equipment and calibration inventory, identify purchases or outside facilities, and state any capability gaps without inventing evidence. Work would produce versioned data, logs, photos, videos, reproducible analysis, and an attributable signed report, with NDA, IP, review rights, clarification limits, and optional retesting agreed first. Best, Hlib
$35 USD in 1 day
2.4
2.4

Hi! We have experience with IoT hardware-software integration, sensor-based systems, and embedded automation. Our work includes an IoT sewing-to-embroidery machine combining hardware control with software processing. However, we would need to verify the available optical acquisition, vibration measurement, and calibration equipment before committing to this specific bench study. We can provide an itemized quotation after confirming equipment availability and the minimum test requirements, with raw-data preservation, repeatable testing, documented findings, and agreed IP and confidentiality terms. Could you share the expected optical sensor type and actuator specifications so we can assess whether the study fits our available capabilities?
$30 USD in 7 days
2.0
2.0

Hello, I’m an Electronics and Embedded Systems Engineer experienced in sensor integration, signal monitoring, PCB design, and hardware prototyping. I understand your objective is to measure vibration actuator interference with optical sensor recordings and identify practical solutions. I can help establish a controlled bench-testing setup with synchronized optical, vibration, and actuator timing measurements. My approach will include repeatable testing, independent reference checks, raw data collection, and signal analysis. I will document all test runs, including failures, with setup photos, test logs, and a detailed technical PDF report. I suggest starting with a small, paid rig-qualification stage before agreeing on the full testing budget. I can also support future PCB, embedded firmware, and complete wearable prototype development. I respect your confidentiality, IP ownership, and documentation requirements. All costs and equipment purchases will require prior approval. Best regards, **Engr. Muhammad Uzair**
$35 USD in 5 days
1.9
1.9

My background in electrical, electronics, and mechanical engineering, combined with construction management experience, supports practical rig design, equipment coordination, and clear technical documentation for a bench-testing project. I can contribute to the physical setup, mechanical coupling considerations, actuator integration, wiring review, test documentation, and organized reporting. My experience coordinating architectural, structural, and MEP systems has required careful attention to interfaces, traceable drawings, equipment layouts, buildability, and cost control—useful qualities when separating mechanical, electrical, and measurement effects. I can also prepare coordinated documentation, setup records, change logs, and repeatable instructions. I should be transparent that my profile does not document a completed optical-sensor interference study or confirm ownership of the specific acquisition, vibration, timing, and calibration equipment requested. I therefore would not claim that evidence or quote unsupported test capabilities. I would be a suitable practical engineering contributor for the physical rig and documentation portions, subject to the agreed equipment and performer requirements.
$50 USD in 7 days
0.0
0.0

1. Relevant experience Relevant experience to disclose: [insert a genuine sensor, actuator, vibration, optical measurement, or signal-interference project, your personal role, and authorized evidence]. I would clearly distinguish previously completed and tested work from proposed methods. I would not claim a successful mitigation before measurements demonstrate it. 2. Equipment and measurement approach Available equipment: [list the exact optical acquisition hardware, vibration or motion measurement equipment, actuator timing interface, independent reference instruments, and data-acquisition hardware you can access now]. I would document sampling rates, bandwidth, resolution, calibration or reference-check status, and access to raw samples before qualifying the rig. The initial setup would record synchronized optical output, independently measured mechanical motion or vibration, and actuator command timing. I would check timing alignment and measurement limits explicitly. Independent references and controlled repetitions would help distinguish actual physical changes from electrical coupling, contact variation, acquisition artifacts, and timing errors. Any unavailable equipment, external facility, or required purchase would be identified and priced separately before authorization.
$100 USD in 7 days
0.0
0.0

I’ve worked on similar actuator-sensor projects where mechanical interference affected data integrity. My role involved diagnosing the problem and implementing a vibration isolation solution, using off-the-shelf materials to demonstrate efficacy in controlled conditions. For the current project, I have access to a high-speed optical sensor and a miniature vibration actuator, both calibrated for precision. The optical and timing channels can be synchronized for raw data capture, ensuring reproducibility. I can confirm that all raw runs will be provided along with a detailed report linking findings to run IDs, fulfilling confidentiality and independent review rights. For Stage 1, I propose a FIXED-PRICE quote of $3,500. This includes setup, recording (3 iterations), analysis, and any immediate materials. I can start within two weeks, with an estimated duration of 4 weeks. Please clarify if there are specific calibration needs or access requirements for additional equipment. Can your timeline accommodate this structure? Liam
$10 USD in 7 days
0.0
0.0

I would structure this project as a controlled, non-human bench study to characterize optical sensor disturbances caused by a nearby vibration actuator and evaluate practical mitigation. Rig qualification: Establish a written measurement plan, independent reference checks, controlled conditions, repetitions, acceptance criteria, and a fixed stop-cost cap before full testing. Synchronized measurements: Capture raw optical signals, vibration or motion data, and actuator timing with documented timestamps, units, hardware settings, and synchronization limits. Repeatable testing: Measure baseline, actuator-on, actuator-off, and recovery behavior to distinguish mechanical coupling, contact changes, and electrical interference without assuming the cause. Analysis and mitigation: Quantify disturbances and recovery time, preserve alert performance, document unsuccessful runs, and quote mitigation and retesting as a separate authorized stage. Reporting: Provide raw data from every run, setup photographs, representative videos, test logs, reproducible instructions, and a dated, versioned PDF report with traceable findings and limitations. With 12+ years of experience, I can contribute a systematic engineering approach to instrumentation, testing, and prototype development. Best Kind Nadia
$30 USD in 3 days
0.0
0.0

I recently completed a project analyzing sensor interference in a similar context, where I led the experiment design and data analysis. I'll help you characterize and mitigate the effects of your vibration actuator on the optical pulse sensor. Understanding the complexities involved, I see that mechanical coupling and electrical noise can significantly impact your recordings. A structured approach through controlled measurements, rigorous documentation, and an iterative testing process is crucial to achieving reliable results. With 6+ years in engineering and data analysis, I'm new to Freelancer, so my pricing is flexible while I build my reviews. I can provide a detailed itemized quote for the initial rig qualification and setup, ensuring all aspects of the measurement plan are covered. Let's ensure your optical signals shine brighter than ever. What specific optical and vibration equipment do you currently have on hand? Regards, Joshua.
$38 USD in 7 days
0.0
0.0

Hello, I understand the need for a structured approach to evaluate the interaction between your miniature vibration actuator and optical pulse sensor. Ensuring reliable measurements while addressing potential interference is critical. I have experience in setting up controlled vibration and optical measurement environments. This includes developing measurement plans that outline acceptance criteria and protocols for data collection, ensuring all raw data is captured accurately. I can provide the necessary equipment and setup for the initial qualification phase, as well as detailed reporting on findings, including any negative results, as they contribute to valid research. I would be happy to discuss a fixed-price quote for the first stage, including setup and analysis, and I can ensure all deliverables meet your outlined standards. Let’s connect for a brief consultation to explore this further. With regards, Maanie
$17 USD in 7 days
0.0
0.0

Our 5+ years of end-to-end electronics development make us well suited to build and instrument a practical bench rig for optical sensor and actuator-interference testing. We design hardware from scratch, develop firmware for Arduino, ESP32 and STM32, and integrate electronics with controlled mechanical operation—capabilities directly relevant to synchronized actuator timing, sensor acquisition and repeatable test fixtures. Relevant work includes an Arduino-based kinetic lighting system controlling three stepper motors with precise timing, as well as an ultra-compact commercial drone design integrating control and power interfaces. This experience supports careful attention to mechanical/electrical coupling, component availability, manufacturability and reliable documentation. We can provide a paid rig-qualification stage, itemized fixed pricing, identify reusable equipment and required purchases, and distinguish measured data from processing or replay. Our deliverables can include raw traceable runs, synchronized channel data, settings and hardware/firmware versions, setup evidence, change logs, analysis, repeatable instructions and a dated versioned report. I would be pleased to provide the practical engineering support and clearly bounded quotation this study requires.
$100 USD in 7 days
0.0
0.0

I saw your Freelancer post for the vibration bench study and wanted to reach out directly. As a newer freelancer, it's hard to stand out among the flood of quick proposals, so I'm taking the initiative here. Happy to work through whatever process you prefer. This is a careful, structured request and I respect the rigor. I'd start with the paid rig-qualification step and a written measurement plan with acceptance criteria before any full recordings — exactly as you specified. On your questions: I've worked with optical pulse sensors and vibration isolation in bench settings. For equipment, I'd use an available bench rig with optical acquisition and an independent vibration reference, and I'll list exactly what's owned versus what needs purchase. One question: do you have a preferred optical sensor model and actuator spec, or should I propose references based on your setup?
$30 USD in 7 days
0.0
0.0

My strongest fit is end-to-end embedded prototype development: I design the electronics, integrate sensors, write firmware, build physical prototypes, and validate the complete system rather than providing consultancy alone. Your wearable requires precisely this combination for synchronised ECG, PPG and motion acquisition, local alerting, onboard storage, and a documented warning-logic implementation. I will approach this as an evidence-led engineering prototype, including the initial fixed-price feasibility assignment, recorded test data, failure or inconclusive results, and documented limitations. I can provide a realistic itemised estimate and schedule after defining the agreed initial scope, with components, testing and external services identified separately. I would be pleased to take responsibility for the complete prototype and deliver a properly documented physical system.
$30 USD in 7 days
0.0
0.0

Oslo, Norway
Member since Oct 28, 2026
$750-1500 USD
$250-750 USD
₹600-1500 INR
$750-1500 USD
$30-250 USD
₹1500-12500 INR
€30-250 EUR
₹600-1500 INR
$750-1500 AUD
₹1500-12500 INR
$10-50 USD
$750-1500 USD
£1500-3000 GBP
$750-1500 USD
$1500-3000 USD
min $50 USD / hour
₹600-1500 INR
£20-250 GBP
₹600-1500 INR
$250-750 AUD