Network Device Configuration Support

@farooqtahir2013

With my 10+ years of experience as a Network, Cybersecurity, VoIP and System Engineer, I believe I am more than equipped to tackle your project head-on. My history of working in small to enterprise-sized companies has given me a thorough understanding of network configurations across a wide verity of devices - including those from Cisco, Checkpoint, Fortinet and Palo Alto, among others. Throughout my career, I've made it a point to stay updated on the best practices within the field. This dedication to staying current means that not only will I be able to guide you through the configuration process, but provide you with the most efficient and secure solution for your specific needs. One of my key strengths is my focus on clear documentation and in-depth explanations. I strive not just to finish a job but to make sure that all parties understand what's been done and why. As we work through this exercise together, I will ensure you have a practical and comprehensive understanding of the devices' configurations—a skill that will surely help you moving forward on your own lab gear confidently.

@iemumair

Hello Good Day! I understand you are looking for a professional network administrator for your project. I am a dynamic IT Engineer with 8 years of experience in systems and networks. I have experience in End-User Technical Support, Desktop Support, Network Design, Development, Operations, Maintenance, Routing & Switches, VPN, and Firewalls. As per my experience, I am very confident to take the opportunity to complete this project. Below are my skills in networking • Configuration of Cisco Firewalls, Routers & Switches • Existing Network Connectivity Issues • Expert in VPN (GRE, SSL, DMVPN, IPSec Site to Site). • Routing Protocols (IPV4 and IPV6) • Network Design, Troubleshooting in GNS3 & Cisco Packet Tracer • Network Diagram using MS Visio • 2 Switches Configurations • L3 Switches Configurations • Router Configurations • Firewall setup and configurations If you hire me, I assure you the best quality of work in the given time frame and at a reasonable price. Kindly message me for further discussion. Awaiting your kind response and thanks in advance for your consideration. Best Regards, Omair System / Network Engineer

@ExpertNetworkEng

Hello, I’m a Senior Network & Security Engineer with 10+ years of hands-on experience designing, implementing, and migrating enterprise and service-provider networks. I specialize in Network Security, SD-WAN, routing & switching, enterprise wireless, and secure network architecture, helping companies modernize legacy networks, improve reliability, and reduce WAN costs. Core expertise: - Firewalls & Security: FortiGate, Palo Alto, Cisco ASA / Firepower IPsec & SSL VPN, site-to-site, remote access, policy design - Routing & Switching: Cisco ASR/ISR, Catalyst, Nexus, Juniper Routers (M10, MX 960) and SRX 500 (BGP, OSPF, EIGRP, IS-IS, MPLS, VLANs, STP, HSRP/VRRP) Enterprise LAN & campus design - LAN Switching (Multi-Vendor): Cisco, Juniper, Meraki, HP, Aruba, FortiSwitch Access/core design, redundancy, QoS, segmentation - Enterprise Wireless: Cisco WLC & APs, Cisco Meraki Wi-Fi, Ubiquiti, Aruba Wi-Fi, FortiAP Coverage design, roaming, security, troubleshooting - SD-WAN: Fortinet SD-WAN, Cisco SD-WAN (Viptela), Cisco Meraki (hub-and-spoke, MPLS + Internet, segmentation, HA, traffic steering) - Cloud & Hybrid Networking: AWS / Azure / GCP Site-to-site VPN, routing integration - Network Automation: Python Certifications: CCIE Enterprise Cisco Certified Specialist – Enterprise SD-WAN Implementation CCNP Data Center CCNP Security Juniper JNCIA-Junos, JNCIA-Cloud If you share your current setup and goal, I can propose a clear and practical solution. Best regards,

@ramygoda1590

Hi there, I am networking expert specialist and consultant for more than 11 years, who spend my free time to learn about new technologies in networking, security field to be always up to date. please just ping me on chat to have a short discussion on your project i will always look for solving your tasks ickly. below is a brief on my experience: Technology Specialist: --------------------- - Can design, implment large scale networking and make exaplanation reports. - Practice on Cisco Packet Tracer, GNS-3, EVE-NG. - Excellent pracitce on VMware WorkStation, Virtual-Box - VPN (IPSEC,IKE v1 or v2 ,L2TP ,OPENVPN, DUO Authentication). - Routing Protocols (BGP, OSPF, EIGRP .. ). - Wrie Technical Reports with excellent and format. Skills and Hands on Experience: ------------------------------- - Cisco devices (routers, switches), routing protocols, IPSEC, Cisco ASA Firewall. - Fortinet Devices: FortiGate, Forti Manager, Forti Analyzer. - wireless (WLC, Access Points): CISCO, Aruba, ubiquiti. - Juniper (M7, M10, MX 480, MX 960) and SRX (300, 500). - Operating Systems: Linux servers (Ubuntu, RedHAT, Debian), windows (Windows server 2012, 2016 ..etc). Regards, Ramy

@rifat0103

Hello there, I am a CCNA instructor and network and security expert. I have 15 year’s practical working and teaching experience in network and security administration. And I have CCNP, CCNA, RHCE, RHCSA . I have also fluency in English and Hindi speaking. I am Expert in EVE-NG, GNS3 and Packet Tracer. Technical Skills: =============== #Good understanding and knowledge of TCP/IP, OSI Layer. #Practical experience in configuring in CISCO 800, 1900, 2900, 2800, 2800, ISR 4300, 4100, ASR 1000 series and catalyst 2960, 9300, layer3 switches, nexus switch. #Static, RIP, RIPv2, EIGRP, OSPF, OSPFv3 and BGP #VLAN, VTP, STP, HSRP, GLBP, VRRP, SPAN, RSPAN, DHCP Snooping, Dynamic ARP Inspection, ARP ACL. #CISCO nexus 9k and CISCO ACI solution like BD, VRF, EPG, Tenant, L4-L7 graph etc. #ACL, NAT, Transparent Mode, Multiple context and Failover (Active/Active, Active/Standby) Site-to-Site VPN, Remote Access VPN and SSL VPN, Intrusion policy, AVC, Malware & File Policy etc in Cisco ASA, Next Generation Firewall and Firepower Management Center (FMC) #F5 BIG-IP Local Traffic Manager (LTM) and Application security manager (WAF). #OSPF, BGP, NAT, DHCP, L2TP, IPSEC, PPP, Firewall etc in mikrotik router. So you are requested to first discuss the project and requirements and after being satisfied please awarded me with the work. And definitely work will be delivered in time and in best quality. Thanking You Kazi

@zditanuel

Experienced with network switch configs (VLANs, trunks, SSH, ACLs). Will walk thru CLI steps for your scenario w/ reasoning, best practices, pros/cons of approaches once you share topolog +8 years of expernece

@Web1devloper

As a seasoned developer with over 8 years of experience, I am confident that I possess the necessary skills to tackle this project effectively. My strong suit lies in my familiarity and expertise with Linux and other related technologies like Git, GitHub, and Docker among others. These tools are not only fundamental in successfully configuring network devices but also in ensuring systematic revision control, collaboration, and deployment. Moreover, my experience with cloud services such as AWS (EC2, Amplify, S3) and GCP is highly relevant given the nature of your project. Understanding network configurations as they relate to cloud infrastructure is essential as it will help ensure accurate replication on your lab gear. Alongside these capabilities, I'm also well-versed in various database systems like MongoDB and MySQL - valuable knowledge for handling any backend requirements that may stem from this project. My previous role was marked by creative problem-solving, critical thinking, and attention to detail - all qualities that are highly relevant to your needs. Hence, if you decide to collaborate with me on this networking challenge, rest assured that I will provide you with not just working solutions but clear explanations documented for future reference. Let's connect at your convenience so we can get started on this journey together.

@leftya2

Misconfigured switch settings can turn a simple lab into a time-sink—especially when best practices, order of operations, or small CLI details are missed. I help by walking you step-by-step through the exact configuration, explaining why each command is used, and giving you a clean, reproducible CLI (or GUI) config you can apply confidently on your own gear. I’ve worked hands-on with switched environments and lab scenarios, so I’ll not only get the setup working, but also point out common pitfalls, validation checks, and—where relevant—alternative approaches with quick pros and cons. The goal is zero guesswork and a setup you can document and reuse. If you want a clear, working configuration you actually understand, message me now and share the scenario so we can get this done quickly and cleanly.

@Dsayyed04

Hello, I can help you complete this switched-network configuration task end-to-end in a clear, practical, and reproductible way. I have hands-on experience with Cisco switched environments (VLANs, trunking, STP, port security, inter-VLAN routing, and best-practice configurations) and I focus not just on making it work, but on explaining the “why” behind each step so you can document and reproduce it confidently in your own lab. What I’ll deliver: Step-by-step configuration walkthrough Clear explanation of each setting and best-practice reasoning Final clean CLI configuration ready to paste into your devices Verification commands (show outputs) and expected results Alternative approaches (where applicable) with quick pros/cons I’m comfortable working with real hardware, Packet Tracer, or GNS3, and I adapt the solution based on your topology and constraints. If you share the scenario and diagram, I can start immediately and ensure the configuration behaves exactly as expected. Looking forward to working with you. Best regards, Danish

@nguyenphuclam06

Hi, there, I have hands-on experience configuring and troubleshooting switched network environments (VLANs, trunks, STP, port security, best practices). I can walk you step by step through the configuration, explain the reasoning behind each setting, and provide clean, reproducible CLI commands. I’ll also compare alternative approaches when relevant so you fully understand the design choices. Best regards...

@mohamedmounir993

Hello! My name is Mohamed and I am Network Engineer specialized in Routing and Switching track and I have worked with different ISPs for more than 6 years. I am excited to share with you my different knowledge in Network, specifically switching environment. Let's connect and deep dive in the requirements and explain it is a clear way so you will be able to recreate it on your own and any future labs

@masterunix

With over a decade of practical experience in Linux, I believe I am the ideal fit for your Networking Device Configuration Support project. As a certified Red Hat System Administrator, I have an extensive knowledge of the Command Line Interface and the Graphical User Interface that permits me to execute complex tasks with precision. My comprehension of network devices and networking environments is you require while configuring network devices correctly. Moreover, my proficiency at explaining technical procedures and imparting knowledge will benefit you as I will not only walk you through the configuration steps but also reason behind them. While achieving the main aim – supplying you with a working configuration, I will additionally provide a detailed set of CLI (or GUI) commands for future replication on other network devices. Additionally, being skilled in problem-solving allows me to think outside the box while considering multiple ways of accomplishing a goal. This can be valuable to highlight the pros and cons of different solutions. I'm available right now and able to align myself with your time zone requirements. Let's connect to realize your project!

@indrasenareddy1

Hello, I can help you complete the device-configuration phase of your switched networking exercise with a clear, correct, and reproducible setup. I have strong hands-on knowledge of networking fundamentals and switch configuration, including VLANs, trunking, STP, port security, and best-practice parameters. Here’s how I’ll approach your task: Review the given scenario and topology diagram in detail Configure devices step-by-step using CLI (and GUI if required) Explain the purpose and reasoning behind each configuration choice Apply industry best practices to ensure stability and correct behavior Provide the final, clean set of commands you can run on your own lab equipment Compare alternative approaches where applicable, with clear pros and cons My goal is not just to “make it work,” but to ensure you fully understand the configuration so you can document it and reproduce it confidently in your own environment. I’m ready to start immediately—please share the exact scenario and topology details, and we can proceed. Best regards, Indra

@mostafa98793

Hello dear, I have hands on experience implementing and configure network devices in multiple production environment, i can assist you with your request, looking forward to hear from you soon.

@sitaram5144

Experienced network engineer ready to configure and secure your switched environment with best-practice CLI commands, verification, and documentation for a fully functional network.

@bitraj

Hello, This project is a very good match for my background and daily work. I am a Network Engineer with strong hands-on experience configuring, troubleshooting, and documenting switched network environments, particularly on Cisco platforms. In my current role and past engagements, I work extensively with: Cisco Catalyst (9200/9300/9400/9500), Nexus platforms, and enterprise switching VLANs, trunking, STP, EtherChannel, port security, ACLs, and best-practice hardening Clean, reproducible CLI configurations with proper validation and rollback awareness Network documentation (LLD), diagrams, and configuration explanations for clarity and reuse.

@hemanthr56

I have 4 years of experience in Network Engineering and Network Operations with strong hands-on expertise in Network Administration and Network Security. I have worked extensively on Cisco routers, switches, firewalls, and wireless controllers, along with Linux system administration and documentation. I have experience handling firewall configurations, CCTV network connectivity, and creating network diagrams using Draw.io. I have supported enterprise LAN and WAN environments, performed on-site troubleshooting for critical issues, and used monitoring tools like SolarWinds and Wireshark to ensure secure and stable network operations. I can deliver this project efficiently within the committed timeline.

@Narayanaraob

if you are a stundent i will do it for free .............................................................................................................................................................................................................................