IR Emitter/Detector Circuit (Reflected Light Sensor)

I also wrote these requirements in a google doc file which might be easier to read: [url removed, login to view]

I am looking for someone to design two similar circuits dealing with emitting and detecting reflected IR light. Here are the deliveries for each circuit:

* Kicad files for the schematic and a PCB (no need to route wires on PCB since I will be modifying design to fit into a bigger project)

* A prototype of the circuit proving its operation (can either use the PCB or be hand soldered on a protoboard)

Payment Schedule:

* One-third of payment delivered when we agree on estimated power consumption, working distance, and you have told me the major components for each circuit. Basically this is a way to start payments to you before you do all the work, but I can also combine this with the other later payments if you want.

* One-third of payment delivered when the circuit is complete and working (you will send photo confirming and I’ll pay before you ship it to me)

* One-third of payment delivered when you are ready to deliver kicad files

The two circuits will be referred to as “Constant IR Circuit” and “Pulse IR Circuit”. The Constant circuit uses a constant IR LED and the pulse circuit pulses an IR LED at 38 Khz.

Here are some requirements for both circuits:

* Have a BOM cost of under $10 (I’m hoping for a BOM under $5 in quantities of 500).

* Both circuits should be powered by 3.3V and communicate with a microcontroller using 3.3V IO lines (Atmel Sam3x is the micro I’m using).

* Components should be available on Mouser or if there isn’t a reasonable option there then provide a link to some site where they can easily be purchased.

* Both circuits should reuse as many similar parts as possible.

* Both circuits should use SMD parts for the chips and passive components, but can use through hole parts for anything where through hole parts are better for cost/performance.

* There should be an easy way to adjust power going to IR LED (such as changing a resistor)

* There is a potentiometer to set a reference voltage used to detect when there is enough reflected light to output a high output.

* Consider the IR emitter and detector need to fit into a casing. This could be a T 1 ¾ LED or a plan to use an LED lens

* The lines coming from the microcontroller for each circuit should be:

** Vcc

** GND

** Signal (digital 0 or 3.3V signal the micro reads)

Constant IR Circuit Requirements:

* Voltage output of the IR detector should be amplified to make sensor sensitive.

* Compare the voltage from the amplified IR light to the potentiometer reference voltage and if it is lower “Output Signal” is near 0V and when IR light is reflected “Output Signal” is near 3.3V.

* The response time of this circuit should be under 1 microsecond.

* Range of this sensor must be 1-5 cm (though longer range is a bonus)

* Beam width should be at least 1 cm at 2 cm distance.

Pulse IR Circuit Requirements:

* Use something like a 555 timer (though feel free to use something else if you know a better option) to generate a 38 Khz pulse and blink the LED at that frequency

* Either use a IR detector pre-tuned to 38Khz or make a window filter to only pass this frequency.

* Voltage output frequency filtered IR detector should be amplified to make sensor sensitive.

* Compare the voltage from the amplified IR light to the potentiometer reference voltage and if it is lower “Output Signal” is near 0V and when IR light is reflected “Output Signal” is near 3.3V.

* Response time should be fast as is reasonable, but it’s understood it can’t be faster than 38Khz

* Range of this sensor would ideally be 10+ meters

* The only beamwidth requirement on this one is if we use a retro-reflector or separating emitter/detector then things should be reasonably easy to align.

Taidot: Piirisuunnittelu, Mikrocontroller, Piirilevyn asettelu

Näytä lisää: led light sensor pic, free metal detector circuit, professional metal detector circuit diagram, best circuit traffic light doc, metal detector circuit board project, need free professional metal detector circuit boards, solar cell detector circuit, metal detector circuit diagram free, industrial metal detector circuit, simple metal detector circuit, color detector circuit project, metal detector circuit, metal detector circuit diagram, window detector circuit 8051, bug detector circuit

Tietoa työnantajasta:
( 3 arvostelua ) Lancaster, United States

Projektin tunnus: #15216397

Myönnetty käyttäjälle:


hello i am from shenzhen china i can do it with soc or mcu . it will small and compact. please PM me. Relevant Skills and Experience circuit design, PCB design Proposed Milestones $555 USD - one time

555 $ USD 7 päivässä
(6 arvostelua)

19 freelanceria on tarjonnut keskimäärin 529 $ tähän työhön


please ignore the bid amount we will discuss the price later in the chat after we have discussed the project thoroughly Relevant Skills and Experience: . Proposed Milestones: 670 - . Hi mribble! Please drop a message t Lisää

670 $ USD 3 päivässä
(42 arvostelua)

I can provide you with the designs and prototype as well. It will require some testing and experimentation to finalize the led powers. We can divide milestones as you require. Relevant Skills and Experience I am an el Lisää

750 $ USD 20 päivässä
(8 arvostelua)
750 $ USD 15 päivässä
(23 arvostelua)

Hi sir I have 5 year experience of electronic field I have done many projects If you need more information about me please see my profile and portfolio Thank you

550 $ USD 10 päivässä
(25 arvostelua)
250 $ USD 10 päivässä
(20 arvostelua)
250 $ USD 10 päivässä
(13 arvostelua)

Hi Sir. I am a professional Electronics Design Engineer having expertise in IR sensor (transmitting/receiving) circuitry. Contact me. Relevant Skills and Experience IR sensors, Electronics Proposed Milestones $333 US Lisää

333 $ USD 2 päivässä
(8 arvostelua)

Hi, I worked on similar things, IR color detector, triangulation and control. 38Khz is one of the standards but we can use any frequency. I work with altium. All the best, Miroslav Relevant Skills and Experience sche Lisää

666 $ USD 20 päivässä
(2 arvostelua)

Hi. I'm a professional hardware/software developer with experience over 20 years. I have some questions about IR emitter/receiver. Relevant Skills and Experience MCU, schematics, PCB prototyping, programming. I was a Lisää

1000 $ USD 40 päivässä
(2 arvostelua)

It is easy for me. I am ready to begin now. Relevant Skills and Experience I have been made a similar device as yours. Proposed Milestones $150 USD - step1 $150 USD - step2 $100 USD - step3

400 $ USD 10 päivässä
(1 arvostelu)

How r u?bro,,,Its me imad, Have done 200+ projects regarding arduino, matlab, .Net, vb, PIC, Altium, Fritzing, Eagle CAD, PHP and HTML. U will feel brotherhood,,,,,,, Relevant Skills and Experience Full monitoring and Lisää

250 $ USD 10 päivässä
(5 arvostelua)

Hi, sir. I have already developed IR transmitter and receiver program. I have analysis algorithm of NEC, RC5, TOSHIBA, SONY code. I saw carefully your project. I can complete your task in time. Relevant Skills and Exp Lisää

555 $ USD 7 päivässä
(1 arvostelu)

A proposal has not yet been provided

555 $ USD 5 päivässä
(0 arvostelua)
888 $ USD 10 päivässä
(0 arvostelua)

hi,i made this project from 2 months it consists from microcontroller,transistor,led ir reciever and transmitter,uln2003 components required to finish this project pls check the pcb from my profile Relevant Skills and Lisää

250 $ USD 5 päivässä
(0 arvostelua)

I am new at freelancer but have successfully done 4 projects (IR Security alarm, Temperature sensor, IR PIR Sensor Alarm, Multipurpose robotic arm) till now, And have good knowledge of requirements related to your proj Lisää

388 $ USD 12 päivässä
(0 arvostelua)

A proposal has not yet been provided

444 $ USD 30 päivässä
(2 arvostelua)
555 $ USD 10 päivässä
(0 arvostelua)