Suljettu

basic labview vi's

I need several VI's created over the next couple of months. The first one is pretty basic. When the program begins, the steps in parrallel are: 1) record Thermocouple #1, 2) record Thermocouple #2 3) use a 5VDC relay to send 12V to a device (a simple 12V fan) (12V will come from a voltage suppply and 4) use a 5VDC relay to send 12V (again, a separate 12V power supply) to a device (thermoelectric heater) for X seconds, X=1-400.

So again, the idea would be that when you press start, both thermocouples begin logging temperature, the fan turns on and stays on, and the thermoelectric heater turns on for a prescribed number of seconds. When you press stop, the thermocouples stop logging and the fan turns off. The thermoelectric heater would already be off at this point.

Taidot: LabVIEW

Näytä lisää: vi, POWER SUPPLY, voltage supply, 12v power supply, logging power use, temperature labview, need labview, heater, voltage power supply, labview program, thermocouple, labview temperature, number power program, fan temperature, 12v, simple temperature program, schematic power supply 100amp, 48vdc power supply design, volt power supply pcb, labview basic, power supply circuit diagram, power supply logo, power supply linear circuits diagram, 48vdc power supply, power supply pcb circuit

About the Employer:
( 0 reviews ) United States

Projektin tunnus: #4284474

12 freelanceria on tarjonnut keskimäärin 75 $ tähän työhön

mikhail1

Experienced in Labview.

100 $ USD 5 päivässä
(1 arvostelu)
2.8
ashwani18in

Hello, I've extensive experience of more than 7 years of LabVIEW development, control loops using PID, fuzzy logic and neural networks along with tremendous hands on experience with M-series DAQ cards, HS-DIO, cRIO, FP Lisää

35 $ USD 1 päivässä
(1 arvostelu)
2.8
Nenad1526

I am a certified LabView Associated Developer with four years working experience in the worldwide known company. I did a lot of similar tasks, and this one seems pretty basic.

50 $ USD 3 päivässä
(4 arvostelua)
1.9
techhelp56935

I can do it very easily. Please check PMB.

40 $ USD 2 päivässä
(3 arvostelua)
0.0
nicu66pr

I am a good Labview programmer.

100 $ USD 7 päivässä
(0 arvostelua)
0.0
dmjtEngineering

I do this stuff on a daily basis, both with NI + MyDAQ and microcontrollers.

30 $ USD 3 päivässä
(0 arvostelua)
0.0
mheydari

Hi, I am a Certified LabVIEW Developer, and can do your project seamlessly. Please contact me.

100 $ USD 5 päivässä
(0 arvostelua)
0.0
tibastar

We have done Labview projects for different academic and industrial use. It won't be a problem finishing this and projects like this.

60 $ USD 4 päivässä
(0 arvostelua)
0.0
lnarayanan90

Hello, I have worked in Labview and provided services for Texas Instruments in developing GUI's for them to communicate with their chips and devices. Thus, my work is really professional. And we adopt to algorithms Lisää

250 $ USD 20 päivässä
(0 arvostelua)
0.0
johnhainsworth

Hello, I can complete this project for you today. From your description, the required programming effort is very low. I would just need to know the answers to the following questions: 1) What DAQ card / device Lisää

60 $ USD 1 päivässä
(0 arvostelua)
0.0
blackandbrown

Quality and On time delivery.

90 $ USD 5 päivässä
(0 arvostelua)
0.0
anilsurvey1980

I would like to work with you. Please let me know the details. Thanks

30 $ USD 2 päivässä
(0 arvostelua)
0.0
alecs22

Good LabView programmer.

50 $ USD 5 päivässä
(0 arvostelua)
0.0