Finite element analysis of a bladed disc of a radial compressor using ANSYS apdl

A bladed disc of a radial compressor (shown in Fig.1a) rotates in normal operating conditions with rotation speed 7000 rpm and a static pressure of 4 kPa applied to each blade at its concave surface. The bladed disc is fixed rigidly to a shaft in such a way that all displacements at the inner radius of the disc are zero. The bladed disc is manufactured from titanium with material properties: elasticity modulus: 1.16E= GPa; Poisson ratio:0.34ν=, density: 4500kg/m3 and the yield strength 135MPa.

Since the bladed disc is cyclically symmetric, a sector model (see Fig.1b) has been created and the geometry of the sector model is provided in a file: “[login to view URL]” where all dimensions are given in millimetres.

In this coursework you should use this sector model in order to:

1) Analyse static deformation and stresses of the bladed disc under simultaneous action of the centrifugal forces and the pressure. Comment on the stress levels obtained, and, if the stresses appear to be excessive, make suggestions by which the stresses might be reduced and then carry out an analysis of a modified design to show that such modifications will reduce the stresses.

2) Calculate natural frequencies and mode shapes of the bladed disc in the rotating reference frame for harmonic index values from 2 to 8 at the normal operating conditions. For each harmonic index you should determine and provide first 5 different frequencies and corresponding mode shapes. Do not forget to take into account the effects of the pre-stressed static state on the modal properties of the bladed disc. Compare results with the natural frequencies calculated without allowing for the pre-stressed state. Assuming that there is engine-order excitation coming from the gas flow for all harmonic indices analysed: from 2 to 8, comment on the possibility of resonance vibrations at the normal rotation speed.

Taidot: Elementtimenetelmällä suoritettava laskenta

Näytä lisää: finite element analysis parabolic antenna, finite element analysis projects ansys, finite element analysis connecting rod ansys, finite element analysis freelance, optimization projects finite element analysis, connecting rod finite element analysis, finite element analysis freelance projects, finite element analysis human touch ansys workbench, finite element analysis jobs, finite element analysis outsourcing, finite element analysis programs ansys workbench , outsource finite element analysis, project discussed finite element analysis ansys workbench, finite element analysis winnipeg, finite element analysis connecting rod using ansys, finite element analysis using ansys, finite element analysis using abaqus, finite element analysis using nx6

Tietoa työnantajasta:
( 0 arvostelua ) MUMBAI, India

Projektin tunnus: #20427649

Myönnetty käyttäjälle:


Hi, dear Sir I understood your project well. I have good experiences in these fields. ..... As an experienced designer, I can save your time and money both. Please send message so that I can start soon and finish. I am Lisää

₹7000 INR 2 päivässä
(2 Arvostelua)

16 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön


FEA Analysis Consulting Services : FEA is beneficial to any project that requires strength, durability or dynamics analysis. It is frequently used to investigate design changes for cost, weight, manufacturing, benchma Lisää

₹8500 INR 5 päivässä
(27 arvostelua)

Hi, Emertion Technologies help you to "Turn your Idea into reality". We help develop your project from earliest stage to production level. We also help in finding best suitable Manufacturer for your product, who can p Lisää

₹9000 INR 7 päivässä
(4 arvostelua)

Hi I'm an expert in mechanical engineering and structure design/analysis. I'm full experienced in finite element simulation for 15 years. I versed in ABAQUS/ANSYS/Strand7.... I can simulate any linear/nonlinear materia Lisää

₹12500 INR 5 päivässä
(6 arvostelua)

Hello, interesting assignment for me. I have been read your task and for me everything is clear. I knew how to write FE report however if you had a teamplate it would be better. According to 1) if stress will be excee Lisää

₹12500 INR 7 päivässä
(3 arvostelua)

Hello Sir, I am mechanical engineer (m,tech). I have successfully completed various projects based on design, analysis, simulations, modeling of mechanical systems using various software like ANSYS, NX, solidworks, Aut Lisää

₹9000 INR 4 päivässä
(3 arvostelua)

I am a Mechanical Engineer proj 6 is a proj done with apdl I have done 9 projects on Freelancer 1) Catia -Assembly & Simulation of robotic arm 2) SolidWorks -Editing & Assembly of Pill Dispenser & its parts 3) SolidWor Lisää

₹12000 INR 15 päivässä
(5 arvostelua)

I am a mechanical engineer with a post-graduation degree and 4 years of experience. I can help you with your FEA problem of static analysis and vibration analysis using ANSYS. Kindly contact me for further discussion.

₹15000 INR 10 päivässä
(2 arvostelua)

Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirements; along w Lisää

₹8500 INR 7 päivässä
(2 arvostelua)
₹12000 INR 6 päivässä
(0 arvostelua)

As a finite element engineer who is working on turbomachinery, it is a easy project. I would like to talk about the details and you can ask me any question if you want to have extra information about me.

₹5000 INR 5 päivässä
(0 arvostelua)

Hi, we have experienced team work on Finite element analysis (FEA) and computational fluid dynamics(CFD). we will do your project as per your requirement. we will discuss more on chat.

₹11111 INR 5 päivässä
(0 arvostelua)

Hi, I am an expert in Finite element analysis. I am very familiar with calculating in static deformation , stresses and natural frequencies. I can do your project perfectly. Waiting for your response. Thanks.

₹7000 INR 7 päivässä
(0 arvostelua)

Mechanical Engineer Development, design & analysis of Product and Parts for different Industries. I work with the latest CAD and CAE software, for 3D modeling, mechanical analysis using FEA . I have experience in th Lisää

₹20000 INR 7 päivässä
(0 arvostelua)

Hello, I am a mechanical engineer with a Masters in Machine Design, working as an Assistant professor in one of the Esteemed Engineering College in Karnataka. I Have Been Guiding my students in FEM related projects bot Lisää

₹7000 INR 4 päivässä
(0 arvostelua)

Hello sir, I have a 4 year working experience with ANSYS. I worked on : mechanical structure analysis - modal analysis - stress analysis using APDL - Topology optimization - CFD. I've read the requirments carefully, p Lisää

₹9000 INR 10 päivässä
(0 arvostelua)