Do some thermodyamics task in 2 hours

A combined cycle gas turbine-steam power plant is modeled as a combination of an Air Standard Brayton cycle and a Rankine cycle connected by a heat exchanger [see textbook Figure 9.22 and Example 9.12]. The gas turbine is a commercial aeroderivative unit with the air inlet to the cycle at 100 kPa, 20°C and a pressure ratio of 12. The compressor adiabatic efficiency is 82% and the turbine adiabatic efficiency is 91%. The turbine inlet temperature is 1300K. The hot exhaust air is sent to a Heat Recovery Steam Generator to produce steam for the Rankine cycle. It cools to 350K as it passes through this heat exchanger.

Some of the steam cycle design is up to you. The condenser pressure of the steam cycle is 6 kPa and the steam enters the turbine at no higher than 20 MPa and a maximum of 500°C. The pump adiabatic efficiency is 68% and the steam turbine adiabatic efficiency is 90%. The condenser uses cooling water which is limited to a temperature rise of 10°C.

The power plant is being designed to provide a net power output of 500 MW. The heat input to the gas turbine cycle is being provided by burning natural gas. Assume the natural gas has a lower heating value of 50,000 kJ/kg and 90% of the energy release goes to heating the air in the combustor.

You are to determine a steam generator pressure and maximum temperature, keeping in mind that the heat exchanger must work without violating the second law of thermodynamics (see e., below). Try to maximize the overall efficiency and…


The pressure of the steam generator and outlet temperature (inlet temperature to the steam turbine).

The mass flow rates of air, steam, cooling water, and natural gas in kg/hr.

The net power for each cycle in MW.

The thermal efficiency of the combined cycle.

Determine whether the interconnecting heat exchanger will work. Assume it is a counterflow heat exchanger and must have a minimum 10°C temperature difference at every point along the piping in the device. *

Taidot: tekniikka, Matematiikka, Koneenrakennus, Fysiikka

Näytä lisää: how much do freelance writers charge for a press release, how do south african musicians get a press release, how do you write a press release, third law of thermodynamics, entropy, zeroth law of thermodynamics, laws of thermodynamics, second law of thermodynamics, enthalpy, first law of thermodynamics, second law of thermodynamics examples, how much does it cost to do a press release on itweb, how do i write a press release, how do i write a press release for an event, how much does it cost to hire a scientist for 2 hours, looking for someone 1 2 days a week to come and do book keeping invoices finance bolton, palm beach gardens i need to hire a typist for 2 hours, 2 to 3 hours a day, 2 hours a day, Convert a Template to a Website in 2 hours

Tietoa työnantajasta:
( 0 arvostelua ) North Bergen, United States

Projektin tunnus: #19349044

17 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön


I am mechanical engineer. I have experience to design and simulate many products using Solidworks and Ansys. If you will hire me, you will get satisfied result for shortest time with high quality.. I can help you.

$500 USD 0 päivässä
(101 arvostelua)

Hi Im a Mechanical Engineer and Expert in Thermodynamics. I can solve the system for you with the TS diagrams and all the calculations within teh expected deadline. Have solved many similar power plant combined cycle p Lisää

$250 USD 0 päivässä
(93 arvostelua)

Hi, Let handle your works to professionals. I am an engineer and expert in the field. Please view my reviews to assure quality of my works. Hope to hear you from soon. Thank You...

$300 USD 0 päivässä
(37 arvostelua)

Dear Sir. I would like to have the opportunity to talk with you in the chat, about this project. I am a Mechanical Engineer with specialization in 3D Modeling, 3D Printing, Motion Analysis, Heat Transfer, and Techn Lisää

$250 USD 1 päivässä
(10 arvostelua)

Hello sir, I would like to work for this project, I'm mechanical engineer and I have experience with this type of project, I can work without supervision. I'm sure that if you choose me you will not regret it. Have a n Lisää

$280 USD 1 päivässä
(2 arvostelua)

My name is Hamza Nassar 1. CAD/CAM, 3D modelling, Interior and Exterior Design and Rendering I have many experience product design, modelling and rendering. I'm 3d max, ArchiCAD, Sketchup, Solidworks a Lisää

$250 USD 0 päivässä
(3 arvostelua)

Hi, sir I am have experience thermodynamics related for my study in master so I can help you for any point do you want. I can solve it, I solved a lot of example similar to it in my study I can solve it for $20

$266 USD 2 päivässä
(1 arvostelu)

Hello Sir, I have read your requirement and understood that you are looking a windows developer/ web application and software developer for your project. We have 6+ years experienced windows developer team and we Lisää

$555 USD 10 päivässä
(0 arvostelua)

Hey I am good I Power plant designing because I worked for 3 year in power plant ...I am also member of FSAE international.

$333 USD 6 päivässä
(0 arvostelua)

I have it worked out

$388 USD 2 päivässä
(0 arvostelua)

Hello, Sir. I can speak in English freely. I am expert of machine learning/image processing. I have full experiences of OCR, object detection, recognition, tracking, counting with python, c++/c#. I am very good a Lisää

$500 USD 6 päivässä
(0 arvostelua)

hi sir ,i am an engineer and want help you in solve what you need .you will happy from my work sir because i am professional in thermodynamic.

$277 USD 0 päivässä
(0 arvostelua)

Hi there, I am a mechanical engineer with strong experience in calculate and solve different type of Thermodynamic and Turbine (Gas and Steam). I would like to have a chance to work with you. Kind regards.

$444 USD 1 päivässä
(0 arvostelua)
$555 USD 10 päivässä
(0 arvostelua)

Hi,I am Ayşe and interested in your project. if you want, you can give me details. Also ı am an engineer and physicist. Have a great day.

$277 USD 1 päivässä
(0 arvostelua)

Hi sir, I'm an Engineer. I'm professional in thermodynamics and Rankine cycle. I can produce a perfect work and make a very good report for you. You'll be amazed from my work.

$450 USD 3 päivässä
(0 arvostelua)

Hello friend, I am an mechanical engineering student, and am good in thermo dynamics. and also I have some experiences in practically by working in sugar industries. I think you are able to succeed in your work.

$388 USD 2 päivässä
(0 arvostelua)