Find Jobs
Hire Freelancers

Enclosure conversion plastic to metal for Hodac D.

$250-750 USD

Suoritettu
Julkaistu noin 5 vuotta sitten

$250-750 USD

Maksettu toimituksen yhteydessä
Cryoscope cabinet top in metal We have a cabinet top for a Cryoscope made in plastic (ABS) which we are having issues with when the weather is cold – it cracks when shipped. We need to have a set of drawings made for a metal top, but in the same design and so it fits the existing system bottom. Attached are some drawings with measurements – NOTE ALL MEASUREMENTS ARE INSIDE MEASUREMENTS!!! There will be some changes since some things are easier to make in plastic. A. We need a new design for an air-filter “holder/box”. The air-filter must be able to be replaced from the outside without use of tools. B. The side air outlets – right now we glue in a metal grid on 2 of them and a filter on the third. In this metal version it should be stamped out holes with a max diameter of maximum 6.5mm – as close together as possible for maximum air-flow. Also the layout of the holes should follow the existing design/curves C. Since the metal cabinet will be made of thinner material, there should be made provision form something which make the cabinet more stiff/stable, but without interfering in the instruments operation or add too much extra weight. D. We do not have the overlay cutout large radius. Will provide a scan of the overlay with measurements.
Projektin tunnus (ID): 18957687

Tietoa projektista

9 ehdotukset
Etäprojekti
Aktiivinen 5 vuotta sitten

Haluatko ansaita rahaa?

Freelancerin tarjouskilpailun edut

Aseta budjettisi ja aikataulu
Saa maksu työstäsi
Kuvaile ehdotustasi
Rekisteröinti ja töihin tarjoaminen on ilmaista
Myönnetty käyttäjälle:
Käyttäjän avatar
Dear Sir! I have a great interest for your job. This is my progressing for your project : 1. Step 1 : Get all your ideal about your frame 2. Step 2 : Design basic 3d concept with the basic dimension 3. Step 3 : Adjust 3d model until you agree 4. Step 4 : Create all technical drawing and convert all type file for manufacturer. Hope to work with you ! Thank you and Best regards, Minh
$444 USD 5 päivässä
4,7 (28 arvostelua)
6,1
6,1
9 freelancerit tarjoavat keskimäärin $331 USD tätä projektia
Käyttäjän avatar
Hi. I am very interested in your project. I have worked as a mechanical engineer and product designer for 5 years. I would like to work with you. My skills are Solidworks, Autocad, CAD/CAM,Autodesk inventor, Ansys workbench and 3Ds Max. If you give me your job, I can start work right now and work full-time for your project. Best Regards
$250 USD 5 päivässä
4,9 (61 arvostelua)
5,7
5,7
Käyttäjän avatar
Hi there, I am an experienced mechanical design engineer in the design and development of a product. My skills are CAD/CAM, product design, 3D design, 3D modeling, making CAD model from photos, etc. in CATIA, SolidWorks, 3ds max software as well as AutoCAD. I am able to do this job. you can check my portfolios from my profile. I can 3D print in the metallic material of your enclosure. we can discuss your project as well as if you want to know more information about me ask me in a message. regards, Abhishek
$333 USD 10 päivässä
4,9 (42 arvostelua)
5,8
5,8
Käyttäjän avatar
Hi, I am Design Engineer. I have several years of experience in product designing, especially in Sheet metal Industry, Plastic molding industry. During Job skilled learned AutoCAD, and Solidworks. I have worked as a design engineer in a few firms and have handled many outsourced projects. I will be more than happy to help you on this project. To see my sample work, please send me a message. Thank you.
$250 USD 10 päivässä
4,9 (70 arvostelua)
5,3
5,3
Käyttäjän avatar
Hello, i saw your project description carefully, i can help you. i am expert in product 2d and 3d drawing by using solidworks. i will provide you good result. Please discuss your project, Hope we wil work together, thank you.
$250 USD 2 päivässä
4,8 (6 arvostelua)
3,7
3,7
Käyttäjän avatar
i'll make for you set of drawings for a metal top, same design and it fits the existing system bottom. you will get new design for an air-filter “holder/box”.
$310 USD 1 päivässä
5,0 (4 arvostelua)
3,8
3,8
Käyttäjän avatar
Hello! For a more detailed evaluation of the project it is necessHello! For a more detailed evaluation of the project it is necessary to see the amount of work. Can you show me the details?ary to see the amount of work.
$250 USD 10 päivässä
0,0 (0 arvostelua)
0,0
0,0

Tietoja asiakkaasta

Maan UNITED STATES lippu
Hopkinton, United States
5,0
33
Maksutapa vahvistettu
Liittynyt lokak. 30, 2008

Asiakkaan vahvistus

Kiitos! Olemme lähettäneet sinulle sähköpostitse linkin, jolla voit lunastaa ilmaisen krediittisi.
Jotain meni pieleen lähetettäessä sähköpostiasi. Yritä uudelleen.
Rekisteröitynyttä käyttäjää Ilmoitettua työtä yhteensä
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Ladataan esikatselua
Lupa myönnetty Geolocation.
Kirjautumisistuntosi on vanhentunut ja sinut on kirjattu ulos. Kirjaudu uudelleen sisään.