§179D Energy Modeling Compliance -- 2

@hayteekeys

Hi, I can build a defensible whole-building energy model that qualifies your commercial project for the §179D tax deduction, fully compliant with ASHRAE 90.1 Appendix G methodology. MY APPROACH - Baseline & Proposed Models: Create both in EnergyPlus or eQUEST using your architectural/MEP drawings, occupancy schedules, and site climate data. - ASHRAE 90.1 Compliance: Model strictly follows Appendix G prescriptive assumptions (envelope, HVAC, lighting, plug loads, schedules) to ensure defensibility under third-party review. - Performance Iteration: Refine proposed design until it demonstrates the required kBtu/ft² reduction and lighting power density thresholds for §179D qualification. - Documentation: Deliver editable simulation files, input decks, calculation spreadsheets, and a final compliance report with clear tables/screenshots for engineer sign-off. DELIVERABLES Baseline and proposed EnergyPlus/eQUEST models (editable) §179D compliance report with predicted savings and LPD Input files, schedules, and cross-check spreadsheets Screenshots and tables ready for third-party review EXPERIENCE Expert in ASHRAE 90.1 Appendix G modeling and §179D tax deduction projects Proficient in EnergyPlus, eQUEST, and IES-VE Track record of delivering models that pass third-party engineer review I am Ready to start immediately; typical turnaround is 2 weeks depending on project complexity.

@electronicsdone

Best §179D Energy Modeling Compliance Partner ⭐⭐⭐⭐⭐ Hi, Thanks for sharing the scope so clearly. I’ve supported commercial energy-modeling and tax-incentive compliance projects where defensible assumptions, ASHRAE 90.1 alignment, and audit-ready documentation were critical. Your project is very achievable. The goal is simple: deliver a complete, review-ready whole-building energy model that demonstrates §179D compliance under ASHRAE 90.1 and stands up to third-party engineering review. ✅ How I’ll Help You Succeed 1. Build baseline and proposed whole-building models using a DOE-approved engine (EnergyPlus, eQUEST, IES-VE, or equivalent) strictly following ASHRAE 90.1 Appendix G methodology. 2. Iterate model inputs and assumptions until the required §179D performance threshold is clearly achieved and documented. 3. Produce a clear compliance package including editable input files, calculation spreadsheets, and a final report suitable for licensed engineer sign-off. ✅ I’ve delivered §179D and ASHRAE 90.1 modeling projects where transparent inputs, traceable results, and clean documentation enabled smooth reviews and successful deductions. ✅ Before I start, one quick thing: please confirm the applicable ASHRAE 90.1 edition and whether lighting, envelope, and HVAC measures are all in scope for the deduction. If you share that, feel free to message me, and we can align quickly. Best, Prat PCB Must Innovations

@AwaisChaudhry

Hello, I’m Muhammad Awais, an energy modeller for commercial projects focused on §179D compliance. I will build defensible baseline and proposed whole-building models in EnergyPlus (or DOE-approved engines like eQUEST/IES-VE) to verify ASHRAE 90.1 Appendix G performance. Upon receiving architectural and MEP drawings plus occupancy data and schedules, I’ll define inputs, run iterations until the target threshold is met, and deliver an editable final compliance report, input files, and calculation spreadsheets ready for third-party review by a licensed engineer. Deliverables will clearly state kBtu/ft² reduction and lighting power density with tables and screenshots for easy cross-checking. If you have prior §179D experience, I’ll tailor the approach and timeline to your needs. What is your desired turnaround date and any hard deadline? Do you have a preferred DOE-approved engine among EnergyPlus, eQUEST, or IES-VE, or should I choose based on project needs? Will you supply final architectural/MEP drawings and occupancy schedules in accessible formats (CAD/IFC/BIM) and data for calibration? Are there any site-specific requirements beyond ASHRAE 90.1 Appendix G to consider (e.g., LEED, local code, or utility programs)? Do you require the final deliverables to include an auditable worksheet with inputs/outputs and an engineer-ready calculation sheet? Best regards,

@redbrickamerica

Hello there! As an adept Energy Modeler and Electrical Engineer, I am well-equipped to tackle your §179D Energy Modeling Compliance project. With proficiency in EnergyPlus and eQUEST software, I will meticulously construct baseline and proposed models to ensure compliance with ASHRAE Standard 90.1. My experience in commercial §179D projects guarantees accurate documentation and performance threshold achievement. I will deliver comprehensive reports and calculation spreadsheets for third-party review promptly. Ready to commence project work efficiently. How would you like to move forward with this engaging project?

@IdealExpert

Hi, I'm Aisha Mujahid, an academic expert with 12+ years of experience in research support, writing mentorship, and scholarly editing. I help students and professionals enhance their work for clarity, impact, and academic success. From refining essays to polishing manuscripts, I offer tailored guidance to elevate your writing and help you achieve academic goals. I specialize in Essays, Research Papers, Case Studies, Dissertations, and Any Other Assignments. Every project I deliver is original, Plagiarism and AI Free, Properly Referenced, and Tailored to your Specific Requirements. I have strong expertise in academic referencing and formatting styles, including APA, Harvard, Chicago, MLA, Vancouver, IEEE, and OSCOLA, ensuring accuracy, consistency, and full compliance with university and journal guidelines. If you’re looking for dependable academic support that truly delivers results, message me to discuss it further. Thank You!

@SolutionMart

My name is "Usama Safdar" and I am a Ph.D degree holder which means I am highly-capable to tackle this project "Content Editor " with 100 percent accuracy. I am a professional writer with over 6 years of experience in writing; Essays, Research Summaries, Thesis, Dissertation, Lab Reports and Case Studies. I always provide High-Quality Solutions within the shortest possible time with all instructions followed against very reasonable prices. I can manage works even with shortest deadlines like; "2500 words work in just 6 Hours" with very reasonable time. As a pro academic writer I am also familiar with all the referencing styles; such as APA, Harvard, OSCOLA, IEE, MLA etc. I always provide plagiarism-free solutions and as a prove I also provide "FREE Turnitin reports". For Samples, please visit my profile https://www.freelancer.com/u/SolutionMart Please message me to start the discussion. Thank You

@muhannadbukhamse

Hi, This is Mohand, a talented U.S.-based electrical and mechanical engineer with proven expertise in energy modeling. I'm excited about your §179D Energy Modeling Compliance project and confident in delivering a whole-building simulation that qualifies your commercial project for the tax deduction. Using EnergyPlus or eQUEST—a DOE-approved engine—I'll create defensible baseline and proposed models aligned precisely with ASHRAE 90.1 Appendix G methodology, iterating as needed to meet performance thresholds. With your architectural, MEP drawings, occupancy data, and schedules, I'll document every assumption, input, and output for third-party review. My deliverables include editable simulation files, input spreadsheets, a comprehensive compliance report highlighting predicted kBtu/ft² reductions and lighting power density, plus clear screenshots and tables for easy verification. I've successfully completed similar commercial §179D projects, turning them around in 7-10 days depending on drawing complexity. I'd love to discuss your timeline and get started—let's chat! Best, Mohand

@harvinder15291

As an Electrical Engineering professional with vast experience in 2D and 3D modeling, animation, and engineering projects - your needs directly align with my skill set. Combining my knowledge in energy modeling, particularly in creating and fine-tuning whole-building simulations using EnergyPlus, eQUEST, and IES-VE, I'm confident I can steer your commercial project to full compliance with ASHRAE Standard 90.1. Not only am I versed in the tools like SolidWorks, AutoCAD and Revit but also accustomed to carrying out tasks as per industry standards. From creating baseline and proposed models to generating the final calculation spreadsheets, my focus is always on accuracy, defensibility and adherence to detailed parameters like ASHRAE 90.1 Appendix G methodology. Delivering files ready for third-party review by a licensed engineer is now part of my core competency. Best Regards Harvinder

@LAMOBLLC

Hi I can develop a defensible whole-building energy model specifically aligned with ASHRAE 90.1 Appendix G to support your §179D deduction. I will build both baseline and proposed models using a DOE-approved platform, carefully documenting all assumptions, schedules, and system inputs. The model will be iterated as needed to demonstrate the required performance improvement while remaining fully compliant with §179D methodology. I will deliver editable simulation files, calculation spreadsheets, and a clear compliance report suitable for third-party engineer review. Final documentation will clearly quantify kBtu/ft² savings and lighting power density, supported by tables and screenshots for easy verification. With prior commercial energy modeling experience, I can move quickly once drawings and data are provided and outline a clear timeline upfront. Thanks

@MADTechUK

Hi, I'm excited about the opportunity to assist with your §179D energy modeling compliance project. With my extensive experience in energy modeling using EnergyPlus and eQUEST, I am well-equipped to develop both baseline and proposed models that meet ASHRAE 90.1 standards. My approach will involve meticulous attention to detail in the inputs and outputs to ensure they are entirely defensible. Having previously worked on multiple commercial projects requiring §179D deductions, I can efficiently iterate the model until it meets the performance thresholds needed. Furthermore, I will generate a comprehensive compliance report and all necessary documentation for third-party review, ensuring a seamless process. I am committed to delivering quality work swiftly, and I expect to complete this project within 10 days. What specific challenges do you foresee in the modeling process? Thanks, Muskan

@armanr78

Hello , Joseph is a US-based multidisciplinary designer and engineer providing integrated architecture, engineering, and consulting services across multiple U.S. states. We deliver coordinated, code-compliant, and construction-ready drawings from concept through permitting and construction. Our in-house team covers architecture, civil, structural, MEP, fire protection, interior design, landscape architecture, and 3D modeling—allowing us to resolve coordination issues early and reduce revisions during construction. All deliverables are prepared with a strong focus on clarity, efficiency, and buildability. I have 10+ years of experience in Electrical Engineering and Energy Modelling. We have experience working with multiple AHJs nationwide and adapting to local codes, permitting processes, and reviewer requirements. Our goal is to provide practical, performance-driven design solutions that support smooth approvals and successful project execution. We would be happy to review your project details and propose a clear scope, timeline, and fixed-price or hourly fee. Best regards, Joseph

@jamesa320

Hi , Hope you're doing well. I saw your request for "§179D Energy Modeling Compliance -- 2" and I can complete your project perfectly.. ✅ Licensed in AL, AZ, CA, CO, CT, FL, GA, IL, KY, LA, MA, MD, ME, MI, MO, MS, NC, NH, NM, NV, NY, OH, OK, RI, TX, UT, VA, VT, and WA. ✅ Service: - Civil Engineering Plans - Architectural Plans - Structural Plans - Structural Calculation Report - MEP & HVAC Plans - Review and Stamp Please feel free to reach out anytime—I’d be happy to discuss your project in more detail. Thank you. Best regards, James & Derryck

@MADAlphaDesigns

THIS IS NOT THE AUTO BID, PLEASE REVIEW IT IN DETAIL I’ve reviewed your project and understand you’re looking for an experienced energy modeler to facilitate compliance with §179D tax deductions through precise building simulations. My background in energy modeling, particularly with ASHRAE Standard 90.1, equips me to create both baseline and proposed models utilizing EnergyPlus, ensuring they meet the required performance thresholds iteratively. With architectural and MEP drawings, I will generate a detailed compliance report, including necessary spreadsheets and documentation for third-party review. Each model will align with Appendix G methodology, providing clear outputs on kBtu/ft² reduction and lighting power density, all presented in an editable format. What specific deadlines do you have in mind for this project?What specific deadlines do you have in mind for this project?

@draganm59

Having spent a decade specializing in the design and implementation of full-stack solutions across a wide range of industries, I bring to the table skills and experience that make me particularly well-suited for your §179D Energy Modeling project. In line with the tasks you outline, my proficiency in conceptualizing, designing, and deploying complex systems from the ground up means I'll be able to weigh in on crucial architectural and MEP decisions as we construct the building simulation. The thorough understanding I've gleaned from managing robust systems connects directly to the art of modeling. My expertise spans pivotal aspects such as software engine selection, file management, and code organization—elements that are absolutely vital when embarking upon projects like this one. What's more, my penchant for delivering stable, secure solutions should allay any concerns regarding your target timeline: quality needn't be sacrificed for brevity. Finally, it's worth noting that my skills extend beyond just building simulations - my in-depth knowledge of databases (particularly PostgreSQL, MySQL, MongoDB), cloud integration (AWS), and automated testing procedures (CI/CD) will ensure I provide clean end-products; editable simulation files in this case- which is one of your acceptance criteria. Let's blend my technical competence with your project vision to create a model that fulfills both ASHRAE 90.1 Appendi G requirements and the §179D tax deduction criteria.

@scottr69

Hello, Jeffery B. I am proficient in Electrical Engineering, Energy Modelling and have over 15 years of experience in this field. Having previously worked on similar projects, I believe this project is a perfect fit for me and I will do my best. I will provide technical solutions to your business through creative ideas and good personal conversation. Thank you. Scott

@davida878

⭐⭐⭐Hello, How are you?⭐⭐⭐ I understand that you need a defensible whole-building energy model strictly aligned with ASHRAE 90.1 Appendix G to support §179D qualification, including baseline and proposed simulations, iterations to meet the threshold, and clean documentation ready for third-party engineering review. I hold a valid U.S. Professional Engineer (PE) license relevant to commercial energy modeling and code compliance, and I have hands-on experience delivering §179D models using DOE-approved engines such as EnergyPlus and eQUEST. I can turn this around efficiently, keep every assumption audit-ready, and deliver editable models, clear summaries, and calculation files within your expected timeline and budget. Please send me a message and let's discuss in detail. Sincerely, David

@lorenzol97

Hello, no problem. I am an energy modeler and certified professional with extensive experience in §179D tax deduction compliance, specializing in creating defensible, Appendix G-based EnergyPlus and eQUEST models for commercial projects to meet ASHRAE 90.1 performance thresholds. I will build both baseline and proposed whole-building simulations from your architectural and MEP drawings, iterating to demonstrate the required energy savings and lighting power density reduction for qualification. Deliverables will include the complete editable simulation files, a detailed compliance report with clear kBtu/ft² reduction calculations, and all necessary screenshots and tables for third-party engineer review. I am ready to begin upon receipt of your documentation. Sincerely, Lorenzo

@InnovationExpert

Hi, I’m Zeeshan Shahid, a Stanford MBA with 6+ years of experience helping students achieve strong academic results. I specialize in delivering clear, well-researched, and well-structured academic work that meets strict university standards. I specialize in Essays, Research Papers, Case Studies, Dissertations, and Any Other Assignments. Every project I deliver is original, Plagiarism and AI Free, Properly Referenced, and Tailored to your Specific Requirements. I have strong expertise in academic referencing and formatting styles, including APA, Harvard, Chicago, MLA, Vancouver, IEEE, and OSCOLA, ensuring accuracy, consistency, and full compliance with university and journal guidelines. If you’re looking for dependable academic support that truly delivers results, message me to discuss it further. Thank You!