
Closed
Posted
Paid on delivery
I'm seeking an experienced embedded electronics engineer to help develop a prototype for a wearable medical device or biosensor. The primary function of the device is yet to be determined, but it could be related to monitoring vital signs, tracking physical activity, or detecting specific biomarkers. Key requirements: - Expertise in firmware programming is essential. - Experience with wearable medical devices or biosensors is highly desirable. - Skills in PCB design, sensor integration, and prototype development would be a plus. The ideal candidate should have a strong background in embedded systems and a proven track record in developing prototypes for medical or health-related devices.
Project ID: 40771816
40 proposals
Remote project
Active 4 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
40 freelancers are bidding on average £212 GBP for this job

With an extensive range of skills in electrical engineering and embedded systems, I'm confident that my capabilities align well with your project needs. My experience in firmware programming, PCB design, sensor integration, and medical device development makes me an ideal candidate to create a wearable medical device or biosensor prototype for you. Throughout my career, I've worked on numerous projects that required real-time data acquisition and analysis. This experience has honed my ability to optimize embedded coding and drivers, ensuring high-performance and accurate monitoring of vital signs or biomarkers in your wearable device. Moreover, my proficiency in AI, Machine Learning & Deep Learning allows me to equip devices with intelligent algorithms for better control and precise data analysis.
£450 GBP in 7 days
8.5
8.5

Dear potential client, My name is Metin, and I am an experienced embedded electronics engineer with a diverse skill set that can greatly contribute to your wearable medical device prototype development. With a background in power electronics, renewable energy, and electronic design, I have developed an acute ability to navigate through varying electronic challenges efficiently. Throughout my career, I have amassed significant experience in firmware programming, PCB design and integration of sensors. These skills are directly applicable to your project and align with your identified key requirements. Furthermore, my past involvement in projects involving DSP(Texas Instruments), Bluetooth and Wi-Fi modules will definitely come into good use as they are highly sought after skills when it comes to the emerging field of wearable medical devices. In addition, I hold proficient knowledge in Orcad Simulation which will be instrumental for testing and evaluating the different design aspects of the device. Having demonstrated my abilities in the microcontroller domain with notable proficiency using various platforms such as Arduino, MSP430, Atmel, DSP (Texas Instruments), Renesas, STM32 and C2000—I have all the necessary technical skills needed to successfully bring this project to life. My knowledge extends into how these systems interface with other necessary elements within the project like Bluetooth and Wi-Fi modules ensuring that the finished system ties together effectively
£100 GBP in 7 days
7.5
7.5

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
£135 GBP in 7 days
7.4
7.4

Hello, I can help develop your wearable biosensor prototype, from selecting suitable sensors and defining the hardware architecture to PCB design and embedded firmware development. I have experience with embedded systems, microcontrollers, sensor interfacing, PCB design, and wireless communication using platforms such as ESP32 and STM32. I can help evaluate vital-sign monitoring, activity tracking, or biomarker sensing options based on your target application, accuracy requirements, size, and battery life. Deliverables can include schematics, PCB files, firmware, BOM, and a working prototype with documented testing. Please share your intended use case, target measurements, and any size or battery constraints so we can define a practical first version. Inshallah, I will help you develop a reliable prototype with a clear path for further testing. Regards, Engr Muhammad Usman
£235 GBP in 7 days
6.9
6.9

Hello, I have strong experience in embedded systems, firmware, sensor integration and PCB design, and I can help turn an early-stage wearable/biosensor idea into a working prototype — from sensor selection and analog front-end through firmware and a compact low-power board. For a medical/biosensor device the critical parts are the sensor interface and clean, low-noise signal acquisition (PPG, biopotential or electrochemical, depending on the target), so I would start by narrowing the exact measurement, then build the electronics and firmware around it. I should be upfront: my track record is in embedded systems and sensor instrumentation, not certified medical-device development, so I won't claim regulatory/FDA experience I don't have. So let's discuss your project in chat. Best regards, Hamza
£120 GBP in 5 days
5.4
5.4

Hello, I’m an embedded systems and hardware design engineer with 4 years of experience developing electronic products from concept to prototype, including PCB design, firmware development, and sensor integration. I can help you define the device architecture, evaluate suitable sensors based on the intended application, design a compact wearable PCB, and develop the embedded firmware for data acquisition, processing, and communication. My experience with STM32, ESP32, low-power design, and custom electronics makes me well suited to developing an initial prototype that can be expanded as your requirements become clearer. Since the primary function is still open, I suggest starting with a short feasibility phase to compare potential applications, sensor options, power requirements, and development costs before committing to the hardware. Do you already have a target measurement in mind, or would you like help selecting the most promising application? Best regards, Mahmoud
£135 GBP in 7 days
5.6
5.6

As an experienced electrical engineer with a solid background in embedded systems, I believe I am the ideal candidate to help you develop this wearable medical device prototype. My proficiency in firmware programming and PCB design would enable me to create an efficient and reliable system for monitoring vital signs or any other requirements you may have. Not only have I successfully developed various IoT devices and systems utilizing technologies such as ESP32 and STM32, but I also bring a unique skillset to the table. As an AI-focused professional, I've built production-level AI systems that operate in real-time alongside existing workflows. This means that not only can I design a highly functional device, but I can integrate it intelligently with your existing infrastructure, maximizing its potential impact.
£135 GBP in 7 days
5.1
5.1

I am an Embedded Systems and PCB Design Engineer with experience in Altium Designer, Kicad, Easyeda, Protious and custom hardware development. I can design your PCB from schematic to production-ready files, including: • Schematic Design • PCB Layout • Component Selection • Design Rule Check (DRC) • Gerber Generation • BOM Preparation • Manufacturing Support (JLCPCB, PCBWay, etc.) I have experience with ESP32, STM32, sensor interfaces, power supplies, RF modules, Ethernet, and industrial electronics. Please share the project requirements, schematic (if available), board dimensions, and any special requirements. I can start immediately. Looking forward to working with you.
£135 GBP in 7 days
5.1
5.1

We at HardFault are excited about the opportunity to work on your wearable medical device prototype, particularly given our experience designing medical-grade PCBs and expertise in embedded hardware design. Your project aligns well with our core competencies, especially with our background in IEC 60601-1 compliant design, which ensures a high standard of safety and reliability. Our team-based approach means we can leverage a broad set of skills, from PCB design to firmware development for ESP32 and STM32 platforms, allowing us to efficiently bring your prototype to life with all the necessary redundancies for enhanced performance and reliability. Our proposed next step is to discuss the specific functionalities and goals of your wearable device to tailor our development plan to meet your needs precisely. Are you leaning towards focusing on vital signs monitoring, or is there a particular biomarker that is of interest in this phase?
£260 GBP in 14 days
3.6
3.6

Hi, I’m an embedded electronics engineer experienced in firmware development, PCB design, sensor integration, and prototype debugging. I can help develop your wearable medical device or biosensor from concept to functional prototype. My experience includes STM32 and ESP32 platforms, sensor data acquisition, signal filtering, BLE communication, low-power electronics, battery management, and compact PCB layout. I can assist with sensor selection, embedded firmware, hardware integration, prototype testing, and technical documentation. Since the device’s primary function is not yet defined, I can help evaluate suitable sensing technologies and establish a practical development roadmap. My approach is to validate the sensing concept and measurement reliability early, then refine the hardware and firmware based on test results. Best regards, Cao Phuc
£135 GBP in 7 days
3.8
3.8

I’m very interested in helping develop your wearable medical device or biosensor prtotype, from selecting the sensing approach to integrating electronics and firmware for reliable data collection. My Approach Define the device’s intended function, target measurements, and power requirements. Select suitable sensors and embedded components. Develop firmware for sensor acquisition, processing, and communication. Design or refine the PCB and integrate the hardware into a wearable prototype. Test functionality, battery performance, and data reliability. Deliverables Prototype architecture and component recommendations Embedded firmware and sensor integratio PCB schematic and design files, if required Prototype testing results and technical documentation Recommendations for the next development stage I have 8 years of relevant engineering experience across electronics, embedded systems, and technical design. Questions Which measurements are you most interested in initially: vital signs, activity, or biomarkers? Do you have preferred sensors, a microcontroller platform, or an existing prototype? Is this an early proof of concept or a device intended for future medical validation? Best regards, Sidra https://www.freelancer.pk/u/sidratulm20
£35 GBP in 2 days
3.2
3.2

Greetings Dear Hiring Manager I can develop your wearable biosensor prototype with embedded firmware sensor integration and compact PCB design 1. Which vital sign or biomarker should be measured? 2. Is a specific sensor or MCU preferred? 3. What battery life and wearable size are targeted? 4. Is wireless data transmission required? 5. Is this for research or a clinical application? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
£21 GBP in 4 days
3.2
3.2

Hi, I am an embedded hardware and software developer with experience in firmware development, PCB design, sensor integration, and hardware–software debugging. I can help you turn your wearable device concept into a working prototype, from selecting suitable sensors and designing the electronics to developing firmware and testing the system. I would be happy to discuss your initial ideas and help define the technical requirements and a practical development approach. Best regards Yasir Ali
£250 GBP in 21 days
2.6
2.6

Hi, I have 16 years of experience in embedded systems, electronics R&D, and biomedical device development, with hands-on experience in firmware, sensor integration, PCB design, and prototype development. My relevant previous projects include: - **Wearable Bio-Impedance & Body Composition Analyzer:** Biomedical sensing electronics, signal acquisition, embedded firmware, calibration, and testing. - **IoT-Based Naadi Analysis Wearable:** Sensor integration, embedded hardware and firmware, BLE communication, display integration, and measurement calibration. I can help you define the device's primary function and translate it into a practical prototype architecture. Depending on the application, I can support sensor selection, analog front-end design, MCU selection, custom PCB development, low-power firmware, wireless connectivity, data acquisition, and prototype testing. My approach is to first establish the measurable parameters and performance targets, then develop and validate the sensing electronics and firmware before moving toward a refined prototype. I work with platforms including ESP32, STM32, and Arduino, and can support the project from concept evaluation through hardware and firmware integration. I would be happy to discuss your initial ideas and recommend a suitable technical approach. Best regards, Subhash Suman Embedded Systems | Biomedical Electronics | Wearable Devices | PCB & Firmware Development
£200 GBP in 7 days
2.3
2.3

With five year experience I can help develop your wearable medical device or biosensor prototype with a strong focus on embedded firmware sensor integration and reliable hardware development I can work on the embedded firmware architecture integrate sensors and support PCB design and prototype development based on the final monitoring requirements I can also help evaluate suitable sensors communication interfaces power requirements and data acquisition methods to create a practical prototype that can be expanded for future validation My experience in embedded systems PCB design and electronics development allows me to approach the project from both hardware and firmware perspectives Delivery Embedded firmware development Sensor selection and integration PCB design support Working wearable prototype Organized source files and technical documentation Best regards Bilal
£35 GBP in 2 days
2.6
2.6

Hi, I’m an electronics engineer with experience in embedded systems and PCB design. I can help you develop your wearable medical device prototype, including sensor integration, hardware design, and firmware development. Before starting, I’d like to understand the intended functionality, required sensors, power requirements, and data communication method so I can suggest the right hardware architecture. Could you share any initial requirements or preferred features for the device? I look forward to discussing your project. Best regards, Muhammad Uzair
£75 GBP in 3 days
1.0
1.0

We have experience with embedded systems IoT development sensor integration and firmware programming. We can help define the device requirements and develop a prototype with suitable sensors and PCB design based on the intended use. Do you have a particular vital sign or biomarker you want the device to monitor?
£135 GBP in 7 days
0.0
0.0

✅ Ready to jump in and get this done the right way—clean, fast, and reliable. ✅ Hi, I'd love to help create a unique resin desk block that captures your team's favorite memories, inside jokes, and personality. I understand you want something more meaningful than a simple decorative piece. I'll focus on arranging the small objects, photos, and printed messages in a thoughtful, layered composition so every detail is clearly visible and the overall design feels balanced. I'll start with a concept layout for your approval, then plan the resin layers, object placement, and finishing details. Special care will be given to preserving printed images, preventing bubbles, and achieving a crystal-clear, polished appearance. Could you share the objects, photos, preferred dimensions, and any design references? I'd be happy to discuss the details and get started. Best regards
£135 GBP in 7 days
0.0
0.0

Last year I prototyped a field-ready cordless 12V supply by first validating real under-load current, then building the battery pack and protection around that measured demand. That same disciplined approach fits your wearable medical device work: we’ll begin by defining sensing targets (vitals/activity/biomarkers), translating them into power, sampling, and safety requirements, then moving quickly into electronics + firmware that can be tested early. I’ll develop the embedded platform (firmware programming, low-power design, sensor integration) and support PCB/schematic design for a compact prototype. With your BOM and constraints, I can recommend architectures for continuous monitoring or duty-cycled operation, design robust interfaces, and add protection for over-current, undervoltage, and short events—critical for health-adjacent hardware. To proceed, share any initial sensors/metrics, target battery runtime, and desired form factor.
£135 GBP in 7 days
0.0
0.0

Embedded firmware + wearable prototype: I’ll bridge your unknown sensing goal into a working medical-grade biosensor platform. Skills match: (1) Embedded firmware programming—I build STM32/ESP32/PIC/Arduino C/C++ applications with FreeRTOS, robust drivers, and real sensor acquisition loops. (2) Sensor integration—I’ve implemented SPI/I2C/UART and multi-sensor interfacing patterns common to vital-sign and activity monitoring prototypes. (3) PCB design—I design manufacturable wearables in Altium/KiCad/Eagle with EMI/power integrity, efficient power regulation, and careful routing. Approach: I’ll start with requirements and constraints (power budget, sampling rates, communication, size/thermal limits), then select an architecture and draft schematics/PCB, followed by bring-up, calibration hooks, and iterative firmware refinement. I can include system simulation support (MATLAB/Simulink) and thermal stress checks (ANSYS) to reduce risk before production.
£135 GBP in 7 days
0.0
0.0

Harringay, United Kingdom
Member since Sep 7, 2018
£250-750 GBP
£250-750 GBP
₹12500-37500 INR
₹750-1250 INR / hour
$1500-3000 USD
$30-250 USD
£250-750 GBP
$750-1500 CAD
$30-250 USD
$750-1500 USD
$3000-5000 USD
$250-750 USD
₹12500-37500 INR
$30-250 USD
$3000-5000 USD
₹1500-12500 INR
$500-4000 USD
$30-250 AUD
$250-750 USD
$30-250 USD