
Closed
Posted
Paid on delivery
TITLE:USB-C hub board with PD pass-through,Ethernet and UART for an Android phone (KiCad) SUMMARY I need a small custom PCB that works like a USB-C PD pass-through hub (similar to a 5-in-1 hub) for an Android phone (OnePlus Nord CE 5). The phone runs my own app that streams video over 5G and sends telemetry. The phone is enclosed in a structure, so all connections must be on the PCB with locking connectors (no loose adapters). WHAT THE BOARD MUST DO 1. Upstream: USB-C male (or short pigtail) to the phone. 2. Power input: USB-C female PD port (from a charger or a 5V source). The phone must boot when power is connected here, and it must stay USB HOST while charging (data role swap). 3. Serial: UART bridge to a JST-GH connector (TX, RX, GND) for an external controller. 4. Ethernet: 10/100 USB-Ethernet with magnetics to a JST connector (data only) for an IP camera. The camera is powered separately (12/24V). 5. Board chips should run from the phone's USB 5V
Project ID: 40789149
22 proposals
Remote project
Active 6 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
22 freelancers are bidding on average ₹3,825 INR for this job

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
₹10,000 INR in 7 days
7.5
7.5

Hello, I can design this USB-C hub in KiCad, including USB-C PD pass-through, UART-to-JST-GH, and USB-to-Ethernet with magnetics and locking connectors. I’ll focus on compact layout, reliable power management, and USB data integrity. I’ll also verify the phone’s host/charging behavior before finalizing the design. Deliverables include schematics, KiCad files, PCB layout, BOM, Gerbers, and assembly files. The listed price is negotiable and can be discussed based on the final requirements and scope of work.
₹7,500 INR in 7 days
5.6
5.6

Hi, I have experience designing USB hub PCBs, including my own FE1.1S-based USB hub project. Please check my portfolio for this project and other PCB designs relevant to your requirements. I’d be happy to apply this experience to your USB-C PD pass-through hub with Ethernet and UART interfaces. Best regards, Ahmed
₹1,050 INR in 7 days
4.6
4.6

This is not an AI-generated bid like all the others I saw. As you can see in my portfolio on my profile, I have extensive experience designing PCBs and mass production equipment, just like you need. I can handle your project. I apologize for the simple proposal; I know you're probably tired of reading AI-generated proposals, and I'd rather not waste time on that. If you're interested in working with me, send me a message and we can work out the details! Best Regards!
₹20,000 INR in 7 days
4.8
4.8

Hello, I am an embedded hardware and PCB design engineer experienced in KiCad, USB-based peripherals, power management, and compact IoT hardware. I can develop the schematic and PCB layout for this custom USB-C hub, integrating UART through CP2102N, 10/100 Ethernet through RTL8152B, and USB-C PD pass-through charging. I would pay particular attention to the USB hub architecture, USB-C role negotiation, PD power-path management, signal integrity, and connector placement for your enclosed installation. I would also verify the compatibility of the proposed architecture with the OnePlus Nord CE 5 before finalizing the design. Deliverables can include the native KiCad project, schematic, PCB layout, BOM, and JLCPCB manufacturing files. Best regards
₹1,050 INR in 7 days
3.8
3.8

I have experience in PCB design, schematic development, USB interface integration, component selection, and hardware prototyping. Our team focuses on reliable circuit design, signal integrity, and manufacturable PCB layouts. I have a dedicated hardware testing lab to test, debug, and validate hardware prototypes before final delivery. Your OnePlus Nord CE 5 needs to stay USB host while charging so the RTL8152B Ethernet and CP2102N UART keep running — that role-swap is the real design challenge here, not the connectors. Here's what I bring to this: → I've designed USB-C PD and hub boards where the phone stays host through a charge port, so your app keeps streaming while PD negotiates. → I build Ethernet over USB with RTL8152B plus magnetics, and UART bridges on locking JST-GH, all on one board. → Firmware, KiCad PCB, 3D enclosure and prototype shipping come from one team — nothing handed off. → I can show you a first schematic review within a week and a fab-ready board shortly after.
₹4,500 INR in 3 days
3.5
3.5

Our experience in high-frequency PCB design and complete electronics development is well suited to your compact USB-C PD hub for the OnePlus Nord CE 5. I can design the KiCad schematic and PCB around USB-C PD pass-through, USB host/data-role requirements, USB 5 V power distribution, UART, and 10/100 Ethernet integration. My background includes RF and electronics engineering, embedded systems development, circuit design, and PCB layout using KiCad, Proteus, and Altium Designer. This supports careful high-speed routing, compact board placement, connector integration, and reliable implementation of the USB-Ethernet path with magnetics and JST-GH connections. I can also account for the locking connectors, phone-enclosure constraints, separate camera power, and the requirement that the phone remains in USB host mode while charging. I am ready to apply my electronics and PCB design expertise to produce a practical, manufacturable KiCad hub board for your system.
₹950 INR in 7 days
3.6
3.6

Hello, I specialize in electronic hardware and PCB design, with hands-on experience using Altium Designer and KiCad for schematic development, multilayer PCB layout, component selection, DRC verification, and manufacturing documentation. My work includes ESP32-based embedded systems, power management circuits, and multilayer PCB designs. I can share relevant portfolio examples. I hold a Bachelor's degree in Physics–Electronics and am currently pursuing a Master's degree in Electronics, Systems and Renewable Energy. I'm based in Morocco (UTC+1) and interested in long-term remote collaboration, including schematic reviews, PCB routing, and design documentation. Before proceeding, could you clarify whether the RTX 3060 requirement is related to additional simulation or CAD software beyond Altium Designer? I'm available to discuss my technical experience, English communication level, computer specifications, and working-hour overlap with your team. Best regards, Hamza El Amraoui
₹1,050 INR in 8 days
3.1
3.1

our project is genuinely interesting, and I love the detail you've already put into it — the OnePlus Nord CE 5 staying USB host while charging is the exact detail most designs get wrong, so it tells me you've thought this through. Here's what I bring to this: → I've built PD pass-through and USB role-swap boards before, so the CC-line and data-role logic won't surprise me → CP2102N UART bridge plus RTL8152B Ethernet with magnetics — both are chips I know well, including the r8152 driver quirks on Android → Full end-to-end from me: KiCad schematic and layout, locking JST-GH connectors, 3D enclosure check, and I can ship working prototypes
₹1,000 INR in 2 days
3.1
3.1

Hi, thanks for sharing the project requirements. Before I start the schematic design, I’d like to clarify a few important technical details: 1. Does the OnePlus Nord CE 5 support USB host mode while charging through a USB-C hub? Have you tested this configuration with an existing hub? 2. For the power architecture, should the board’s ICs be powered from the phone’s 5 V supply, or should they be powered from the external USB-C PD charger when connected? 3. What USB PD power rating do you require from the charger, such as 5 V/3 A or 9 V/2 A? Should the board support higher charging profiles? 4. For Ethernet, do you require a standard 10/100BASE-TX interface with a transformer on the PCB and a JST connector for the cable to the IP camera? 5. Which JST connector series and pitch do you prefer for the UART and Ethernet connections? 6. Do you have any preferred USB-to-UART or USB-to-Ethernet ICs, or should I select suitable components based on Android compatibility, availability, and PCB size? 7. Could you share the maximum PCB dimensions and any mechanical constraints for the connectors? Once these details are confirmed, I can propose the hardware architecture and component selection before proceeding with the schematic and PCB layout.
₹2,000 INR in 7 days
2.3
2.3

Hello! I’d be glad to help bring your custom USB-C hub board to life. I have experience with embedded hardware design, USB interfaces, and compact PCB layouts, including projects involving UART communication and peripheral integration. I’m familiar with the challenges of combining power delivery, data connectivity, and reliable external interfaces on a small board. I’ll focus on USB-C PD pass-through, maintaining USB host operation while charging, integrating a UART-to-JST-GH interface, and implementing 10/100 Ethernet with proper magnetics and locking connectors. I’ll also carefully review power paths, role negotiation, signal integrity, and compatibility with your OnePlus phone before finalizing the KiCad design. My priority is a reliable, manufacturable board that fits your enclosure and works as intended. I’d welcome the opportunity to discuss your requirements and help make this project a success. Best regards!
₹1,500 INR in 7 days
2.0
2.0

To create a compact USB-C hub PCB tailored for your Android app, I’ll leverage KiCad for optimal layout efficiency while ensuring all connections feature locking connectors. The design will include an upstream USB-C male connection to your OnePlus Nord CE 5, with a PD female port that enables seamless power input and maintains USB Host mode while charging. Incorporating a CP2102N for UART communication, I'll establish a reliable bridge to the external controller via a JST-GH connector. For Ethernet connectivity, I'll implement an RTL8152B chip paired with magnetics, ensuring compliance with the Linux r8152 driver for stable video streaming to your IP camera. Careful consideration of power management will ensure that all board components operate from either the phone’s 5V or the PD input. What specific locking connector types do you prefer for the UART and Ethernet connections? Liam
₹600 INR in 7 days
0.0
0.0

Hello there, It's my pleasure to write to you that I can complete this task of design a USB-C PD pass through hub. The board would have USB-C male connector to the phone, USB-C female PD port, UART bridge to a JST-GH connector and 10/100 USB-Ethernet with magnetics to a JST connector for an IP Camera. I will provide you well annotated schematic capture, ERC & DRC clear PCB layout. Kindly connect and let's discuss the details of the project. Regards,
₹1,500 INR in 2 days
0.0
0.0

A USB-C hub combining PD pass-through, USB host behavior, UART, and Ethernet requires careful circuit design and PCB layout, and my background in PCB design, circuit design, embedded systems, and electronics directly matches this project. I can design the KiCad board around the required USB-C power/data architecture, CP2102N or a similar UART bridge, and RTL8152B or equivalent 10/100 Ethernet interface with magnetics and locking JST-GH connections. My embedded systems and firmware/driver experience is also relevant to checking Linux compatibility, USB enumeration, power sequencing, and reliable communication with the Android phone and external controller. I will keep the layout compact while accounting for USB differential-pair routing, power distribution, grounding, and connector placement. I would be glad to develop a practical, fabrication-ready PCB design for this enclosed Android hub and help ensure the electrical interfaces are robust and serviceable.
₹800 INR in 3 days
0.0
0.0

I’m a PCB Design Engineer with 5 years of experience in Altium Designer, multilayer PCB design, power electronics, and embedded hardware. I can design your compact USB-C PD hub with UART, USB-to-Ethernet, locking connectors, and optimized power management. I’ll focus on reliable connectivity, compact layout, and manufacturing-ready outputs, including Gerber files, BOM, and Altium project files. I’m ready to discuss your requirements and get started. Best regard
₹1,200 INR in 7 days
0.0
0.0

Hi — I can design the USB-C PD hub in KiCad: schematic, PCB layout, and gerber package for fabrication. Remote delivery with a short review cycle on the schematic before layout freeze.
₹1,200 INR in 7 days
0.0
0.0

Hello, I can design this custom USB-C hub PCB in KiCad, integrating USB-C PD pass-through, USB host/data-role handling, UART-to-JST-GH, and 10/100 Ethernet with suitable magnetics and a JST interface. I’ll review OnePlus Nord CE 5 compatibility, power sequencing, charging while hosting, and USB 5V power requirements before finalizing the design. Deliverables will include the schematic, PCB layout, BOM, and manufacturing files. I’ll confirm critical interface and connector details before implementation to ensure a reliable, compact design.
₹15,000 INR in 7 days
0.0
0.0

I can design your USB-C PD hub with Ethernet and UART in KiCad, focusing on power routing, signal integrity, and manufacturable outputs. My Upwork profile has earned over $300,000 with account Paul.P. I will deliver schematic, layout, and review notes. Best regards, Paul.
₹1,200 INR in 7 days
0.0
0.0

I have experience with USB-C circuit design and KiCad PCB layout. I can help develop a compact PCB integrating USB-C PD pass-through, UART connectivity, and 10/100 Ethernet, with proper power management and component placement. Do you already have preferred ICs for the PD controller, USB-to-UART bridge, and USB-to-Ethernet interface, or should I select suitable components?
₹1,000 INR in 7 days
0.0
0.0

Designing an ultra-compact commercial drone board within a 35 × 45 mm footprint demonstrates the precision this custom USB-C hub requires. I specialize in end-to-end electronics development, including circuit design, schematic capture, optimized PCB layout, component selection, and BOM preparation. With over 5 years of experience across hardware and embedded systems, I can develop a KiCad design integrating the USB-C PD pass-through architecture, USB-Ethernet interface with magnetics, UART bridge, JST-GH locking connections, and power distribution from the phone’s USB 5V rail. My focus on component availability, thermal performance, reliability, and manufacturability is especially relevant for a compact board enclosed within your structure. I would be glad to apply my PCB layout and electronics experience to create a robust, production-minded hub board for your Android phone and connected equipment.
₹5,000 INR in 7 days
0.0
0.0

Bengaluru, India
Payment method verified
Member since Feb 15, 2025
₹20000-30000 INR
₹12500-37500 INR
₹12500-37500 INR
₹1500-12500 INR
$1500-3000 USD
₹600-1500 INR
$15-25 USD / hour
₹600-1500 INR
₹600-1500 INR
$30-250 USD
$1500-3000 USD
$30-250 CAD
$30-250 USD
£20-250 GBP
₹600-1500 INR
₹1500-12500 INR
₹1500-12500 INR
£20-250 GBP
$30-250 USD
$750-1500 USD
$30-250 USD
$250-750 USD
$30-250 USD
₹1500-12500 INR