Small modifications (schematics, PCB layout) of existing open hardware project in Eagle

Attached you can find LPC1343 project. I need following modification to this project done:

* replace LPC1343FBD48 with LPC1347DBDB48 and relabel the solder mask (GPIO blocks are different and maybe something other, re-check the overall functionality)

* remove U4 EEPROM

* remove JTAG2 connector

* remove from JP1 pin1(5V)

* remove from JP2 pin1(VCC), pin6(GND) and C6

* remove from JP3 pin1(VCC), pin6(GND) and C9

* remove from JP4 pin1(VCC), pin4(GND) and C10

* remove from JP8 pin1(VCC), pin6(GND) and C15

* remove from JP11 pin1(VCC), pin11(GND) and C16

* remove from JP13 pin1(VCC), pin6(GND) and C17

* move RTS, DTR, CTS pins from UART block JP5 to GPIO block and relabel it (I plan to use those pins as GPIOs, not as UART signals)

* keep the logical grouping by the functionality (GPIO, SPI, I2C blocks etc.)

* remove 2mm DC barell jack connector CN2 and replace it with just a two 0.1" header pins (one for GND and second one for 5V)

* a lot of stuff has been removed, make the whole board smaller - more breadboard friendly

* you'll probably add some part(s) - at least LPC1347, the parts need to be annotated correctly according to the datasheet - take current LPC1343 as an example how I would like to have it done (no magic numbers - pins with just numbers and without actual description)

* feel free to use/modify attached [url removed, login to view] Eagle library


* updated schematics and board files I could open and edit with freeware version of Eagle 6+

* generated gerbers ready for production - I'll use [url removed, login to view] service

* BOM list with parts available in Farnell Europe store (please avoid parts in US stock)

To prove, that you're a human and actually have read this whole post, please finish your offer/private message with following sentence "Meh." :-)


Taidot: sähkötekniikka, elektroniikka, Mikrocontroller, Piirilevyn asettelu

Näytä lisää: relabel, layout pcb service, in post production, find it project, eagle breadboard layout, eagle breadboard, small microcontroller, vcc, rts, pcb layout, pcb layout eagle, pcb board, meh, just jack, I2C, GPIO, electronics service, electronics pcb microcontroller, eagle, Eagle PCB

Tietoa työnantajasta:
( 5 arvostelua ) Ostrava, Czech Republic

Projektin tunnus: #4242077

4 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_18% %project_currencyDetails_sign_sub_19%/tunti tähän työhön


Hello, I can do this.

€10 EUR / tunti
(13 arvostelua)

Please see pm

€20 EUR / tunti
(2 arvostelua)

I offer you professional help.

€10 EUR / tunti
(4 arvostelua)

Experienced PCB designer

€6 EUR / tunti
(0 arvostelua)