Find Jobs
Hire Freelancers

Single Axis Solar Tracker

$30-250 USD

Suoritettu
Julkaistu yli 4 vuotta sitten

$30-250 USD

Maksettu toimituksen yhteydessä
In this project you are to design a Single Axis Solar Tracker system. The system will use a microcontroller, photoresistor mounted on a motor to search for the brightest spot in a 180-degree arc. The motor moves the photoresistor in an arc searching for the brightest spot. You may use any of the following: Photoresistor, Servo motor, H-Bridge motor driver, DC motors
Projektin tunnus (ID): 22393973

Tietoa projektista

15 ehdotukset
Etäprojekti
Aktiivinen 4 vuotta sitten

Haluatko ansaita rahaa?

Freelancerin tarjouskilpailun edut

Aseta budjettisi ja aikataulu
Saa maksu työstäsi
Kuvaile ehdotustasi
Rekisteröinti ja töihin tarjoaminen on ilmaista
Myönnetty käyttäjälle:
Käyttäjän avatar
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 8 years in arduino and electronics,i can make to u the required design and coding if needed for ur single axis solar tracker using the components that u have mentioned
$120 USD 3 päivässä
5,0 (30 arvostelua)
5,5
5,5
15 freelancerit tarjoavat keskimäärin $218 USD tätä projektia
Käyttäjän avatar
Hi there, Being a professional electrical engineer, I can do this project for you. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .
$250 USD 5 päivässä
5,0 (27 arvostelua)
6,5
6,5
Käyttäjän avatar
Hi, We will design single axis Solar tracker, the hardware will consist of a stepper motor rotating 180 degrees to find maximum power point. Please feel free to contact us. Best Regards, Shahbaz. Relevant Skills and Experience We are a company offering customized development of the Electronics.
$333 USD 15 päivässä
4,8 (51 arvostelua)
6,8
6,8
Käyttäjän avatar
Hi there I'm professional electrical engineer I have done Masters in electrical engineering I have vast experience in circuit design using microcontrollers I will do your task professionally according to your requirements
$140 USD 2 päivässä
4,9 (54 arvostelua)
5,7
5,7
Käyttäjän avatar
****** ma shaa Allah ****** I'm are professionals in ✔️MATHEMATICS, ✔️MATLAB, ✔️SOLIDWORKS, ✔️Adams✔️LTSPICE✔️Ansys✔️ANSYS FLUENT, ✔️PHYSICS, ✔️COMSOL ✔️PDF to Doc or all format and versa I am a boss. ⭐⭐⭐ Major skills and Qualifications ⭐⭐⭐ ✅DSP and Image Processing ✅Face Detection / Recognition / Classification & Object Tracking ✅ STATISTICS, R, Probability ✅Mathematics: GA, NN, CNN, Machine & Deep Learning ✅Physics: Mechanics, Nuclear physcis, electronics, Optics. ✅Signal processing: FFT/DSP, Computer Vision ✅Mechanics: FEA/CAD/CAM, Robotics, CFD ★★★ Software tools I am using: ★★★ ✅OpenCV, OpenGL ✅Matlab & SIMULINK /Simulation ✅Solidworks, Ansys Fluent, Solidworks ✅Androied,JacaFx,Larval I also have complete SOLIDWORKS Mechanical Design - Associate CERTIFICATE CODE : C-GZ4CJX4ERF @ If you keep in touch with me, you will be satisfied with my best result! ❤Thanks❤
$140 USD 3 päivässä
4,7 (65 arvostelua)
5,3
5,3
Käyttäjän avatar
hi i am interested to work on your project. i can satisfy your requirement. it would be my pleasure to serve you.
$140 USD 7 päivässä
5,0 (11 arvostelua)
4,5
4,5
Käyttäjän avatar
Hello Dear Concern, We are a team of professional members of Electrical, Electronics, Mechanical, Civil, Chemical, Energy, Industrial Engineering. We are also expert in following softwares: MATLAB, Simulink, PADS, PORTEL,Proteus, Cadence ,Solidworks PCB, ANSYS, ABACUS, AUTOCAD, DipTrace, Kidcad, MATLAB, SPSS, PRO/E, CATIA V5, Stud pro, Homer Pro, We are trusted people and will never break you trust. We will deliver your work with in your defined timeline. I assure you that your work will be error free and 100% professional with high quality. We will never waste your time and money. We will try over best to make you proud. Please consider me for this job. Thank you in advance. Regards,
$200 USD 3 päivässä
4,5 (10 arvostelua)
4,5
4,5
Käyttäjän avatar
I am an electronic engineer with 20 years of experience. I've done a lot of projects so far. I use Altium for electronic design. I use the datasheet of ICs to create a library and schematic. I can give you examples if you want.   I've designed a solar tracker before. I have 10 years of experience in power electronics. I have enough experience to make your project. If you have any questions, you can ask. I'il fit your time and budget. Please return.
$100 USD 7 päivässä
4,6 (4 arvostelua)
2,9
2,9
Käyttäjän avatar
hi, I am Biks A. Taye and I am doing PhD degree in electrical engineering. I have published 6 research papers in international journals, which are related to electrical and electronics engineering. I also have practical experience of more than 10 years in electrical engineering and electronics. please contact me in chat, thanks!
$140 USD 7 päivässä
5,0 (1 arvostelu)
0,7
0,7
Käyttäjän avatar
[---->Dear sir. You will not waste your gold time.<--------] you must install the two Solar senser. I have checked your project description and requirements carefully. I am interesting in solar tracker. I will never make you disappointed. If you give me a chance to work with you, I will provide you with high-quality work only for you daily. I am always ready for you to discuss your project. Best regards!
$140 USD 7 päivässä
0,0 (0 arvostelua)
0,0
0,0
Käyttäjän avatar
dear sir, i have read your description, and i can complete the project. using photoresistor as input and motor stepper as output. please contact me for an interview thank you
$111 USD 5 päivässä
0,0 (0 arvostelua)
0,0
0,0
Käyttäjän avatar
Hi sir, we need to complete the project in following steps/ milestone - 1. Construction and Testing of hardware. (8 working days) 2. Developing firmware. (5 Working days). 3. PCB designing and manufacturing for Prototype. (7 working days). 5. PCB assembling and implementation of the final prototype(5 Working days). Deliverable: 1. Hardware schematics and documentation and PCB cad file, Gerber file. 2. Firmware (source code, .c file etc). 3. Complete Prototype on request. (shipping charges, customs charges extra). Query: 1. What is the size of the overall system and as well as Solar panel? 2. How should we power up the hardware? We are experienced and professional embedded engineers having a depth understanding in electronics. looking forward to your decision. thank you.
$250 USD 25 päivässä
0,0 (0 arvostelua)
0,0
0,0
Käyttäjän avatar
I am good in embedded programming. I am an electrical and electronics engineer with 3 years experience. I am interested in this project and I will deliver within the stipulated time. We can talk and negotiate better.
$150 USD 7 päivässä
0,0 (0 arvostelua)
0,0
0,0
Käyttäjän avatar
The BOM cost depends on the application, such as the payload type, i.e., the power output of the motor. The cost also depends on the quantity of your system.
$800 USD 7 päivässä
0,0 (0 arvostelua)
0,0
0,0

Tietoja asiakkaasta

Maan UNITED ARAB EMIRATES lippu
Al Ain, United Arab Emirates
4,9
2
Maksutapa vahvistettu
Liittynyt huhtik. 17, 2018

Asiakkaan vahvistus

Kiitos! Olemme lähettäneet sinulle sähköpostitse linkin, jolla voit lunastaa ilmaisen krediittisi.
Jotain meni pieleen lähetettäessä sähköpostiasi. Yritä uudelleen.
Rekisteröitynyttä käyttäjää Ilmoitettua työtä yhteensä
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Ladataan esikatselua
Lupa myönnetty Geolocation.
Kirjautumisistuntosi on vanhentunut ja sinut on kirjattu ulos. Kirjaudu uudelleen sisään.