# Must have experience in Intel Quartus Prime

Develop a 4-bit Adder using Quartus Prime with graphical design files.

b. Create a file “[login to view URL]”, build a half adder (inputs A, B, outputs

S, Co) and create a symbol for it

c. Create a file “[login to view URL]”, build it using two halfadders (from part

b) and an OR gate, and create a symbol for it. (inputs A, B, Cin,

Outputs S and Co).

blocks. Your inputs and output will be 4-bit busses A, B and S and

as well as the single-wire output Cout. Recall that to specify a

single wire from a bus, use square brackets, such as A[2]. Note:

Connect the CarryIn of the first bit to the symbol GND.

e. Compile your project and fix any errors.

i. Insert the busses A, B and S (listed as “groups” in the node

finder) as well as the node Cout.

ii. Set your simulator with a step size of 1 us and an end time

of 16 us.

iii. Set input A to count from 0000 to 1111 by right-clicking,

choosing

select entire waveform

, then choosing value,

count, and increment by 1 every 1 us

iv. Set input B to be a constant value equal to 9. Do this just like in step iii, but

choose “arbitrary value” instead of “count value”.

correctly.

h. Turn in four screen shots pasted into a MS-Word file, each cropped

to show only the relevant portions.

iv. [login to view URL] showing correct simulated results.

(I would need the file as well)

Alternative to simulation

If you cannot get the simulator to work, you may instead program the project to

the DE0-CV board. Use switches 9,8,7,6 for input A and switches 5,4,3,2 for

input B. Use LEDs 9,8,7,6 for the sum and LED 4 for the CarryOut. Submit

images of your board showing input combinations of 0011 + 1000, 1001 + 0001,

0101 + 1100 and 0010 + 0100.

the circuit adds A + B. If subtract = 1, the circuit subtracts A – B. Simulate the

operation as above, but with the subtract signal low for the first half and high for

the second half.

(I would need the file as well)

Tietoa työnantajasta:
( 4 arvostelua ) Seattle, United States

Projektin tunnus: #15523009

## 7 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön

uetian09ee506

Hi, i am experienced user of Quartus, i can do your project Relevant Skills and Experience Electrical Engineer Proposed Milestones \$120 USD - Quartus

\$100 USD 3 päivässä
(262 arvostelua)
7.2
loi09dt1

A proposal has not yet been provided

\$50 USD 1 päivässä
(148 arvostelua)
6.7
liveexperts123

please ignore the bid amount we will discuss the price later in the chat after we have discussed the project thoroughly Relevant Skills and Experience: . Proposed Milestones: 190 - . Hi wisantoleon! please inbox me to Lisää

\$190 USD 2 päivässä
(10 arvostelua)
5.7
quandangvan

I have completed Ripple carry adder/subtractor before. So I can do it well

\$100 USD 3 päivässä
(9 arvostelua)
4.4
SANGITAR

Hi,which development board are you using. Please share the pin assignment table as well. Relevant Skills and Experience vhdl Proposed Milestones \$111 USD - Complete

\$111 USD 4 päivässä
(5 arvostelua)
4.1
AhmedSobhiSaleh

I am a professional electrical engineer expert in digital circuit design and have the required cad tools on my laptop I can finish your task quickly and efficiently you can see my work in my portfolio Relevant Skills Lisää

\$111 USD 3 päivässä
(16 arvostelua)
4.5
ReconLogic

Hi! I will give you all the files according to your specs. Im well versed in intel altera tools. I have access to Cyclone 5 Socrates and MAX10 bemicro board. I can do for DE0 as well. Relevant Skills and Experience Pr Lisää

\$100 USD 3 päivässä
(3 arvostelua)
2.9