Suljettu

Make me a microcontroller with a program for a small research

I would like to have, for a small research, a microcontroller with a program installed in it and with external elements.

The program is:

1. The microcontroller must generate a pulse train.

2. The duration of the impulses is 3 min.

3. The number of impulses - no more than 15.

5. The intervals between impulses are from 40 to 100 minutes. These intervals are assigned by the microcontroller at each power-on depending on the microcontroller turn on number as follows:

Microcontroller turn on number Consecutive intervals between pulses, minutes

1, 11, 21 70, 50, 90, 80, 40, 60

2, 12, 22 80, 60, 40, 70, 50, 90

3, 13, 23 50, 90, 40, 60, 80, 70

4, 14, 24 40, 60, 80, 70, 90, 50

5, 15, 25 70, 60, 40, 50, 80, 90

6, 16, 26 60, 80, 50, 70, 90, 40

7, 17, 27 80, 60, 70, 40, 80, 50

8, 18, 28 70, 80, 50, 40, 60, 90

9, 19, 29 40, 80, 90, 60, 70, 50

10, 20, 30 80, 70, 40, 60, 50, 90

6. The microcontroller may receive Incoming Impulses (IS). When such a pulse arrives, the distance D in time between the beginning of the nearest previous pulse from the pulse train and the moment of arrival of this IS should be determined and memorized. When the button is pressed, the D values should be displayed. When the microcontroller is turned off, the D values should be erased.

7. There should be a toggle switch to speed up operations 200 times (for accelerated testing).

8. There should be a list of input and output contacts and contacts for supplying of external + 5V power.

9. The microcontroller and its elements should be located in a spacious case.

Simon Basovich

Taidot: Sähkötekniikka, Elektroniikka, Arduino, Mikrocontroller, Tietojenkäsittely

Näytä lisää: need microcontroller program, need someone write program small business, fat16 microcontroller program, microcontroller program making companies india, uav microcontroller program, pic microcontroller program pwm ups inverter, microcontroller program printer, conduct small research project, make blackjack program, make botting program delphi, make calculator program cell phone j2me source code, make chat program, make chat program hichatter inspeak, make ddos program, make drawing program actionscript, make event program photoshop, small pic microcontroller program, where can i find programmers who can make a program for me here in manila, small research grants program spencer foundation, https www spencer org small research grants program statement

Tietoa työnantajasta:
( 0 arvostelua ) HAMPTON, Australia

Projektin tunnus: #29440656

25 freelanceria on tarjonnut keskimäärin $310 tähän työhön

sagradoamicus

HI I am experienced embedded system developer with more than 14 years of experience. I have read the details and have a few questions about IS. Please get in touch to discuss it further Regards

$400 AUD 5 päivässä
(263 arvostelua)
8.0
(33 arvostelua)
7.4
(34 arvostelua)
6.6
(48 arvostelua)
6.8
Adrianopl

Hi, I've read your project description and I have a few questions, please contact me so we can discuss it in more detail. I can work with different microcontrollers and can send you the assembled and tested board. C Lisää

$250 AUD 15 päivässä
(8 arvostelua)
6.1
(17 arvostelua)
6.3
SPARKtechBD

Have real time working and building experience on micro-controller based device to read sensors data and send the data to the web server or controlling relay switches and LEDs or Display. I have read your description a Lisää

$250 AUD 7 päivässä
(8 arvostelua)
5.6
doggar302

Hi! I am an Electronic engineer, PCB Layout, Circuit Design, microcontroller, STM32 microcontroller, C programming expert having past experiences with ,Altium, arduino, pic, AVR, chipkit and Texas instruments microcont Lisää

$250 AUD 7 päivässä
(17 arvostelua)
5.4
(45 arvostelua)
5.3
AlexFaster

Hi. I can choose ready to use (standard) PCB with microcontroller (STM32) then write a program for it and then insert it into case that printed on 3D printer. Regards, Alex.

$700 AUD 14 päivässä
(7 arvostelua)
5.3
hemedmechanical

you can use micro controller like ATmega328 to generate the pulse and you will have a button connected to one of the pin to change pulse duration

$200 AUD 7 päivässä
(22 arvostelua)
4.8
(34 arvostelua)
5.8
macroenergy

Thanks for Freelancer which gives chance to meet you. I hope you are good. I have read your description carefully and understand everything. I have 10 year experience on microcontrollers. I will provide pulses by usin Lisää

$75 AUD 7 päivässä
(15 arvostelua)
5.0
braincenter

Hello, Hope this message finds you well, I checked your details and I believe that my experience is what you are looking 4. I have been working on similar projects for the past eight years, and I have the essential sk Lisää

$140 AUD 7 päivässä
(15 arvostelua)
4.9
soltracker

Its me Imad, have done hundreds of projects regarding embedded systems, U will get the best work done..thanx............................

$100 AUD 2 päivässä
(44 arvostelua)
4.5
santiagocortesr0

Hi, I have rich experiences with firmware on micro controller such as stm32 and nRF52832. If we use nRF52832, we can send and receive the data using ble between phone and device. I hope to work for the project and lo Lisää

$200 AUD 3 päivässä
(2 arvostelua)
3.4
FSEVE

Hi there!, I will develop firmware required to generate customized pulse train. I am Electronics engineer with experience in programming firmware, C, C++, Python and IoT. It will take time to develop code for the outp Lisää

$2500 AUD 45 päivässä
(6 arvostelua)
3.1
DamianLP

Hello, I am Telecommunications and Electronics Engineer with deep knowledge on microcontrollers and Arduino systems. I can make your system using an interactive simulation software called Proteus (from Labcenter Electr Lisää

$250 AUD 3 päivässä
(4 arvostelua)
2.7
itservicehb

Dear project manager, Thank you very much for posting your interesting project. I am a german software engineer with extensive experience in microcontroller development and software development for high quality system Lisää

$180 AUD 7 päivässä
(0 arvostelua)
0.0
vinhngo3976

Hi!! I'm a senior student, majoring in Mechatronics. I'm really interested in your project. Can you contact me for more detail, please?? Best regards!

$150 AUD 10 päivässä
(0 arvostelua)
0.0