Part I. Smile and Frown face
Part II. Rotating Smile Face
1. Project Description:
Connect the 8x8 dot matrix display to the Arduino.
Be sure to ensure the mapping is appropriate to match the dot matrix map (diode positions) to the pinout of the Arduino and the pinout declarations in the software (row and column arrays).
Complete the interface by mapping the pinouts of the display and Arduino pins to the software row and column arrays as shown in class.
1. Utilizing the 8x8 dot matrix display the smile face and then change the smile to a frown. Each position should remain for 2 seconds, then repeat.
2. Utilizing the 8x8 dot matrix display the smile face and then rotate the face 90 degrees at a time until the face is back to the original position. Each position should remain for 2 seconds before the next rotation, then repeat. The face can be rotated clockwise or counter clockwise.
Provide the following:
a. Code listing.
There should be 2 code listings. One for part 1 and one for part 2.
b. Electronic Parts used:
8x8 dot matrix
Resistors (recommended but optional)
c. Electronic picture of your setup.
14 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön
Hello! After reading your description, I interested to work with your project. I have hardware for testing project. And I have enough experience to make this project Look forward to your answer. Best regards.
I have done such projects with bare dot matrix directly connected to Arduino showing heart, smile, ... It will be just the matter of creating the rotation arrays. Message me to send you the pictures
I working with embedded and iot for 3 years. I alredy make many projects which are just like your project. So please give me chance to work with you. Thank you