
Completed
Posted
Paid on delivery
PCB Design for a USB-C Powered LED Project We will select a freelancer within 12 hours. Once the project begins, the design must be completed to a manufacturing-ready standard within 12 hours. We are looking for an experienced PCB designer to create a simple PCB featuring a USB-C connector. Preference will be given to candidates with experience in designing PCBs that meet specific power requirements and who can develop efficient layouts for LED integration. Please provide examples of similar work you have completed in the past. The system will use a custom cable—not a standard USB-C cable—that carries only +5V and GND connections and must support up to 30W. The main PCB will include a USB-C connector and a brightness control (dimmer) button. There will be an LED PCB (1x2 cm) equipped with four bright LEDs facing different directions (the light will be diffused through a 3D-printed diffuser). Additionally, the design includes four 1x1 cm daughter boards, each featuring a specialized LCD. Beyond the LEDs, a specific line may draw up to 5V 2A. If the power supply is insufficient to run the entire system, the logic must automatically dim the other LEDs to ensure that at least 5V 1A is reserved for that specific line. In short, the system requires logic to prioritize power allocation to a designated line while adjusting the brightness of the remaining LEDs. The brightness control button, located next to the USB-C connector, should cycle through the following brightness levels: 70 → 80 → 90 → 100 → 90 → 80. Due to extremely tight time constraints, this project will proceed directly to the production of 1,000 main PCBs and 1,000 sub-board PCBs, skipping the prototyping (sample testing) phase. While there is no separate compensation for the PCB design itself, you must provide access to the design files for manufacturing purposes. By accepting this project, you agree to these terms. Final payment will be issued only after the PCBs have been received and verified to function exactly as designed. In the event of a dispute, we will cover the shipping costs to send the units to you so that you may personally verify any errors. If you remain unsatisfied, we will arrange for the products to be sent to you directly via PCBWAY. Please be assured that we have no intention of withholding your earnings unfairly. If the products function correctly and the project is completed successfully—meeting all requirements despite the tight schedule—the agreed-upon payment will be made. If even a single error is discovered, the project will be considered a failure, and no payment will be issued. In such a case, we would incur a significant loss from the production of unusable PCBs. The payment we provide is not for the PCB design itself, but for the delivery of a fully functional product within the required, urgent timeframe. The project milestones are structured as follows: An initial payment of $100 will be made for the PCB review and the placement of the order with the manufacturer. The remaining balance will be released as 'Milestone 2' once the products have been received from the manufacturer (PCBWAY) and verified to be fully functional, with all features operating perfectly. Every function must work flawlessly. This project must be completed within 24 hours. Applicants will be selected within 12 hours. Proposed BOM (Bill of Materials): Board 1 (Design to be as compact as possible) 1x USB Type-C female connector (TYPE-C-31-M-12): Must protrude from the PCB to allow for cable insertion. 1x 90-degree push-button (PBH2UEESNPNAGX): Intended for a 'soft-touch' operation; please position it 0.5 cm to the right of the USB Type-C female connector. 1x 2-pin header for a battery charger (supporting up to 5V 2A). 1x Scroll wheel for master dimming: Must allow for 100% brightness control. For example, if the scroll wheel is set to 50% and the push-button is pressed to toggle to 100%, the final output should remain at 50%. (Suggested component: COM-09806; feel free to propose an alternative if you know of a more suitable part.) Given that the LEDs may generate significant heat and the product enclosure is made of plastic, this is a critical design consideration. It is highly likely that this value will be permanently fixed at a very low level. This is extremely important! + Added a safety feature to the board: the power supply will cut off completely if the total power consumption exceeds 50W. Board 2 (2.5 cm in length, 1 cm in height) 4 units of SPMWH1228MD7WNWYVK (or an equivalent component) – Warm-colored LEDs, distributed evenly across the PCB. Board 3 (3 cm x 1.5 cm; consists of 3 rows, each 0.5 cm wide, with LEDs positioned in the center of each 0.5 cm segment) 7 units of SPMWH1228MD7WNWYVK (A) – Warm-colored LEDs 2 units of JE2835AGR-N-0002A0000-N0000001 (B) – Green LEDs 1 unit of JE2835AFR-N-0001A0000-N0000001 (C) – Red LED Layout: A - - - - - A B B A A C - A - A - A If you are able to complete the task within 12 hours,
Project ID: 40790476
57 proposals
Remote project
Active 5 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Hi, I design compact power/LED boards in EasyEDA and can meet your timeline. Plan: USB-C 5V input with eFuse and over-power cutoff, MCU priority logic (reserve 1A for your special line by PWM-dimming the LEDs), the 70→80→90→100→90→80 button cycle, a master dimmer, and LED/daughter boards sized to spec, with thermal derating for the plastic case. One condition: I won’t release files for 1,000 units untested. I’d propose a 5-piece prototype run first, then production Gerbers, BOM and test checklist. Questions: 30W at 5V is 6A, above most Type-C connector ratings (~5A). What’s your true max current, and is the 50W cutoff intended? Can we add a paid prototype step before mass production? I look forward to your response. David
$200 USD in 1 day
0.0
0.0
57 freelancers are bidding on average $139 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with compact LED PCBs, power management and embedded controls, including taking consumer products from concept through production. I can target manufacturing-ready files within 12 hours once the final component details and board dimensions are confirmed. I would design the power control to reserve at least 5V/1A for the priority output and reduce LED brightness as available power falls. The scroll wheel would cap the button-selected brightness, with particular attention to heat inside the plastic enclosure and the current ratings of the custom cable and USB-C connector. I will provide editable design files, Gerbers, BOM and assembly data, and can support firmware development and PCBWAY's manufacturing queries. Similar projects cannot be shared publicly, but I can show examples privately. Are the LCD daughterboards still required, and can you provide their part numbers? Please also confirm whether the 50W shutdown threshold is intentional with a 30W input. Before releasing the 1,000-unit order, I would agree on the final specifications and acceptance checks with you. Please contact me to discuss details.
$250 USD in 1 day
7.7
7.7

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$140 USD in 7 days
7.4
7.4

I’m a verified Electrical/Electronics Engineer and professional PCB designer with over 8 years of experience creating manufacturing-ready boards in Altium, KiCad, Eagle, and EasyEDA—directly matching your urgent USB-C power and LED PCB requirements. My background in circuit design, embedded systems, and PCB layout enables me to handle the compact main board, USB-C power entry, 30W/5V distribution, LED integration, daughter-board connections, button and scroll-wheel dimming, and power-priority logic for the designated 5V line. I can also provide the complete manufacturing design files required for PCBWay production. My EasyEDA certification and experience with tools including LTspice, PSpice, Proteus, MATLAB/Python, and C/C++ support careful power and control design under demanding constraints. I am available for this urgent project and ready to deliver a precise, production-focused PCB design within the required timeframe. Choose me to turn these specifications into a reliable manufacturing package.
$140 USD in 7 days
6.7
6.7

Hi there, I carefully reviewed your USB-C powered LED system requirements, including the compact main controller board, high-current 5 V distribution, master dimming controls, automatic power prioritization, thermal considerations, and the two custom LED daughter-board designs intended for direct PCBWay production. I am a mechatronics engineer with almost half a decade of experience in electronics design, power supplies, embedded systems, high-current PCB routing, LED-related circuitry, hardware prototyping, and manufacturing-ready PCB development using Altium Designer. My background is directly relevant to the power-distribution, MOSFET/control circuitry, current monitoring, thermal management, and compact PCB layout required here. Because power electronics, PCB design, and embedded hardware are already part of my core skillset, I can approach the design efficiently while paying particular attention to current capacity, copper sizing, thermal performance, component ratings, PCBWay manufacturability, and the risks associated with moving directly to a 1,000-unit production batch without a prototype stage. Please send me a message so we can discuss the project and start. Best regards, Samuel tshibangu
$140 USD in 1 day
6.5
6.5

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!
$230 USD in 7 days
6.0
6.0

⭐⭐⭐⭐⭐ I can help review and develop your multi-board LED PCB design, including the USB-C power input, dimming controls, LED layouts, and power-priority logic. I would begin by checking the electrical requirements and proposed BOM, particularly the 5V power budget, custom cable current capacity, USB-C connector ratings, thermal considerations, and the 50W cutoff requirement. These details are critical before committing to manufacturing 1,000 units. The design workflow would include schematic development, compact PCB layout, component selection, power-management and brightness-control implementation, and manufacturing deliverables such as Gerber files, BOM, and assembly files. Before confirming the 12-hour deadline, I would need to review the existing design files, confirm whether firmware or programmable logic is required, and clarify the exact behavior of the prioritized power line and dimming controls. One important concern is proceeding directly to 1,000 units without prototype testing. I recommend at least a design verification review and clearly defined acceptance criteria before manufacturing. Please share any existing schematics, PCB files, enclosure dimensions, and the intended power supply specifications so I can assess the scope and feasibility of the deadline.
$30 USD in 1 day
5.8
5.8

Hello, I can review your design, optimize the PCB layout, and prepare manufacturing-ready files. I have experience with compact PCBs, LED integration, and power management. One important point: delivering 30W at 5V requires 6A, so the power source, custom cable, and connector must support this current. I also recommend prototype testing before producing 1,000 units to avoid costly manufacturing errors. I can start immediately after reviewing the existing files and BOM. Best regards Eng Mahmoud Ibrahim Electronics Enginner Replies in 10min
$140 USD in 7 days
5.6
5.6

Since 2003 I am working in Digital Electronic. So more than 18 years of experience in Electronics. Arduino NANO/UNO/MEGA, ESP32 and Raspberry PI to build a digital device to read sensor data and send it to the web server, motor control, control relay switches and LEDs. More than 5(five) years of experience in Arduino design and build. If you want an excellent and error-free project delivery, then send a message to me, please. Since 1995 I have been working on Analog and Digital Electronics to build any kind of device. I have build lots of devices. So more than 20 years of experience on Electronics. Including power supply design. Any kinds of schematic and PCB design.
$250 USD in 7 days
5.6
5.6

Hello, I’m an Electrical/Electronics Engineer with 15+ years of experience in PCB design, embedded firmware, power electronics, and LED control. I can design compact, manufacturing-ready PCBs with USB-C power input, brightness control, LED drivers, thermal considerations, and priority-based power management to protect the designated 5V line. I’ll review the BOM, verify component compatibility, and prepare schematics, PCB layouts, Gerbers, and manufacturing files. However, the 12-hour deadline and 1,000-unit production without prototyping require rapid clarification of power requirements and acceptance criteria to minimize manufacturing risks. Best regards, Hamza
$90 USD in 4 days
5.4
5.4

Hi, I can deliver your board as a complete, manufacturing-ready package — schematic, multilayer layout, and all production files — without the usual back-and-forth between designer and fab house. I have 14+ years of experience in PCB design and firmware development. I work daily in Altium Designer, KiCAD, and Eagle, and I own licenses for Altium and Eagle, so I can start immediately on your project. My background covers: • 2–16 layer PCB layout, high-speed routing, and controlled-impedance design • Mixed-signal boards, power distribution, and EMI-aware placement • Full deliverables: schematic, PCB layout, BoM, Gerbers, pick-and-place, ODB++, assembly drawings, DRC report, and 3D STEP model I previously worked at READA PCB Technology in Shenzhen as a PCB designer and production manager. That factory-side experience means my layouts are built for real manufacturing — correct clearances, sensible via strategy, and DFM/DFA checks before files go out the door. If you also need prototypes or small-batch assembly, I can coordinate PCB fabrication, PCBA, component sourcing, functional testing, and shipping through the Shenzhen network I know well from my time at READA. I am available to start right away and happy to sign an NDA before reviewing your design brief. Looking forward to your reply. Best regards, Ting
$190 USD in 7 days
5.2
5.2

PCB design and layout are my core engineering skills, making me well suited to create the compact USB-C LED control boards and manufacturing files required for this project. I understand the importance of correctly handling the 5V supply, high-current paths up to 30W, LED integration, daughter-board connections, connector placement, and compact mechanical layout. My background in CAD/CAM and product design supports accurate, manufacturing-ready engineering work, while my skills in circuit design, electronics, PCB design, and PCB layout allow me to address the dimming controls, button sequence, scroll-wheel brightness limit, and power-priority requirements in the design. I can also provide the required design files for production and focus closely on component placement, routing, clearances, and reliable connections. I am prepared to work within the urgent 24-hour schedule and would be glad to take responsibility for delivering the complete PCB design package for manufacturing.
$66 USD in 1 day
4.9
4.9

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq
$180 USD in 7 days
5.3
5.3

Custom IoT hardware, PCB design, and embedded systems are core parts of my work, making this USB-C powered LED controller a strong match for my expertise. I can design the compact main PCB, LED board, and daughter-board interfaces while accounting for the custom +5V/GND cable, 30W capacity, USB-C connector placement, charging header, button, and master dimming control. My background in circuit design and PCB layout supports the power-priority requirement: preserving the designated line’s required supply while dynamically reducing the remaining LED brightness when available power is limited. I also understand the importance of manufacturing-ready files, compact placement, correct clearances, and reliable integration between the boards and control logic. The design can include the specified brightness sequence and master dimming behavior, including retaining the wheel’s reduced output when the button selects a higher level. I am prepared to work within the urgent timeframe and deliver the manufacturing design files for PCBWAY production. Choose me to handle this critical PCB design with the attention required for a direct production run.
$140 USD in 7 days
5.1
5.1

I can help design a professional and reliable PCB for your USB-C powered LED project, focusing on efficient power management, compact layout, and dependable performance. I understand the importance of creating a well-designed circuit that supports USB-C power input while ensuring stable and consistent LED operation. My goal will be to develop a PCB design that meets your technical specifications and is suitable for manufacturing. I can handle schematic development, component selection, USB-C power input configuration, LED driver circuitry, PCB layout, and routing. I will pay close attention to power requirements, current limitations, thermal considerations, component placement, and electrical clearances to ensure a clean and efficient design. I can also prepare manufacturing-ready Gerber files, BOM, and other required documentation for PCB fabrication and assembly. My priority is to deliver an accurate, compact, and professionally documented PCB design that meets your expectations. I will maintain clear communication throughout the project and make necessary revisions based on your feedback. I look forward to reviewing your project requirements and helping bring your USB-C powered LED project to completion.
$150 USD in 3 days
5.0
5.0

My PCB design and layout skills are directly suited to developing the compact USB-C powered LED controller and its associated boards. I work with circuit design, electronics, embedded systems, PCB design and PCB layout, allowing me to address the power distribution, connector placement, dimming controls and LED integration as one complete system. The design includes demanding power conditions—up to 30W through the custom +5V/GND cable, a dedicated 5V 2A line, and brightness reduction when available power is limited. My electronics and embedded-systems background is relevant to implementing the button-controlled brightness sequence, master dimming behavior, and priority power logic, while my PCB layout experience supports compact, manufacturing-ready board designs and the required daughter-board integration. I understand the urgency and the importance of providing complete production files for PCBWay. I am ready to take responsibility for the PCB design and deliver a carefully checked manufacturing package within the required timeframe.
$39 USD in 1 day
4.9
4.9

Hi, This is exactly the type of project I work on. I’ve handled similar requirements before and have designed and built a working PCB successfully. You can check my portfolio for examples of my previous PCB projects, including my USB hub design. I’ll carefully review the design to minimize risks. Since you plan to manufacture 1,000 units without prototyping, minor issues may still appear, although the design could also work perfectly from the first run. Best regards, Ahmed
$140 USD in 7 days
4.6
4.6

Dear Client, I can take this from requirements to manufacturing-ready PCB files within the urgent schedule, provided the electrical requirements are frozen at the start. PCB Must Innovations has 30+ years of experience in PCB design, LED drivers, power electronics, USB-C hardware, thermal design, embedded control and production support. I can design the main controller board plus both LED boards, including the USB-C power input, priority 5 V load management, push-button brightness sequence, master dimming control, LED drive circuitry, protection, thermal considerations and manufacturing files. Because you are planning 1,000 units without a prototype run, I would also perform a focused design review before release: current capacity, connector/cable limits, LED thermal load, copper sizing, protection thresholds, BOM availability and PCBWAY assembly constraints. I can deliver schematic, PCB source, BOM, Gerbers, drill files, CPL/Pick & Place and manufacturing notes. One important point: your input is specified as 5 V / 30 W maximum, while the design also requests shutdown above 50 W. Those two limits conflict and should be clarified before the circuit is frozen. One question: is 30 W the true maximum available input power, or must the hardware support a future source above 50 W? Message me with that answer and I can immediately define the power-priority and LED-control architecture. Kind Regards Prat PCB Must Innovations
$180 USD in 4 days
6.5
6.5

Hi, I’m an electronics engineer experienced in PCB design, power management, LED control, and embedded hardware development. I can help design the compact main board and LED daughter boards, including brightness control, power prioritization, thermal considerations, and overcurrent protection. I’ll focus on a reliable, manufacturing-ready layout and verify component compatibility and power requirements before releasing the production files. However, given the 30W load, potential 50W cutoff, and production quantity of 1,000 units, I recommend a quick prototype or engineering validation before mass production to minimize costly failures. I’m available to review the existing requirements immediately and discuss a realistic delivery schedule and payment milestones.
$140 USD in 1 day
3.8
3.8

Your project requires PCB design and layout experience focused on compact electronics, power distribution, and reliable manufacturing files—skills directly covered by my expertise in Circuit Design, Electronics, PCB Design and Layout, and PCB Layout. I can work on the USB-C main board, LED board, and daughter-board arrangement while keeping the layout compact and suitable for production. I understand the importance of correctly routing the 5V/GND power path, supporting the specified current demands, positioning the protruding USB-C connector and nearby push-button, and integrating the dimming controls and power-priority logic. My broader engineering and 3D-printing background is also useful for coordinating PCB placement with the diffuser, custom cable, and physical enclosure constraints. I am prepared to focus on this urgent manufacturing-ready PCB design and provide the required production design files. Choose me to handle the electronics layout with careful attention to the specified power and space requirements.
$140 USD in 1 day
4.6
4.6

I have experience in circuit design, USB-powered electronics, schematic development, and PCB layout. Our team focuses on reliable power management, component selection, and manufacturable PCB designs. I have a dedicated hardware testing lab to test and debug prototypes before final delivery. I can complete the PCB design within 12 hours, including layout and manufacturing-ready files. I’m ready to start immediately. → I've shipped production PCBs from schematic to PCBWAY files, including a 50-unit retail controller batch that worked on arrival. → I'll deliver compact main board, LED and LCD daughter boards, plus firmware for the 70-80-90-100 dimming cycle and auto-dim reserve. → Full stack in-house: schematic, layout, firmware, 3D diffuser fit checks, manufacturing-ready Gerbers and BOM.
$150 USD in 1 day
3.5
3.5

Obrenovac, Serbia
Payment method verified
Member since Sep 12, 2024
$250-750 USD
₹1500-12500 INR
£20-250 GBP
₹100-400 INR / hour
$40-80 USD / hour
₹12500-37500 INR
$1500-3000 USD
$750-1500 USD
₹1500-12500 INR
$10-30 USD
$10-300000 USD
$30-250 USD
$250-750 USD
₹1500-12500 INR
₹1500-12500 INR
$250-750 AUD
$250-750 AUD
$250-750 AUD
$750-1500 USD
$15-25 USD / hour