
Closed
Posted
Paid on delivery
I need a full finite-element evaluation of a mechanical part, covering three areas in one coordinated study: • Stress & strength: map critical stresses, safety factors and deformation under the specified load cases. • Vibration: identify natural frequencies, mode shapes and any resonance risks. • Heat & temperature: predict steady-state and transient temperature fields so I can confirm the part stays within material limits. All I can supply right now are photos and hand sketches with dimensions, material specs and the load / boundary conditions. You will need to build a simplified CAD model from that information before meshing and running the simulations. Please include in your offer: – The software you plan to use (e.g. ANSYS, SolidWorks Simulation, Abaqus or similar). – A brief outline of how you will validate the model accuracy. – Turnaround time for a short progress check and for the final report. The final deliverable is a concise engineering report (PDF) plus native files that clearly show results, assumptions and recommendations.
Project ID: 40783604
30 proposals
Remote project
Active 15 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
30 freelancers are bidding on average ₹26,300 INR for this job

My 9 years of professional mechanical design experience, combined with Finite Element Analysis and SolidWorks skills, directly matches your need to recreate the component from photos and sketches before evaluating its performance. I can develop a simplified SolidWorks CAD model and use it as the basis for a coordinated FEA study covering stress, deformation, safety factors, natural frequencies, mode shapes, and thermal behaviour. I will clearly document material properties, loads, restraints, mesh assumptions and simplifications, then validate the model through mesh-convergence checks and comparison against hand calculations or expected physical behaviour where applicable. SolidWorks native files and a concise PDF report will present the results, assumptions and recommendations clearly. I can provide a short progress check after the initial CAD setup and preliminary analysis, followed by the final report and native files within the agreed schedule. Select me for a careful, practical mechanical simulation based on your available documentation.
₹22,000 INR in 3 days
7.4
7.4

Hi there, I can perform comprehensive FEA of your mechanical component using ANSYS or Abaqus, covering material properties, realistic boundary conditions, contact interactions, mesh convergence, and stress/deformation analysis. Deliverables: - FEA model setup and simulation - Stress, strain, and deformation results - Safety factor and critical region assessment - Mesh convergence study and detailed technical report I have 7+ years of mechanical engineering and FEA experience across static, nonlinear, fatigue, modal, and thermal analyses. Timeline and budget can be finalized after discussing the complete scope. Could you share the component CAD model, material details, and expected loading conditions? Best regards, Arati M.
₹25,000 INR in 7 days
6.6
6.6

I can evaluate your part across structural strength, vibration, and thermal performance using ANSYS Workbench. Starting from your photos, sketches, and dimensions, I’ll build a simplified 3D model suitable for simulation, then assess critical stresses, deformation, safety factors, natural frequencies, mode shapes, and steady-state/transient temperature distribution. I’ll define the load cases, supports, contacts, and thermal boundary conditions from your specifications. Validation will include checking reactions and force balance, reviewing mesh quality and convergence, comparing results with analytical calculations where applicable, and checking temperatures against material limits. I can share an initial progress update within 2–3 working days after receiving the required inputs. The complete study and concise PDF report should take approximately 5–8 working days, depending on geometry and analysis complexity. You’ll receive the engineering report, native ANSYS project files, key result plots, documented assumptions, and practical recommendations. Could you share the sketches, material specifications, and load cases so I can confirm the scope and turnaround?
₹25,000 INR in 7 days
6.3
6.3

Your mechanical component can be developed from photos, sketches and dimensions into a clear SolidWorks CAD model, supported by my 6+ years of design experience and SolidWorks/CAD-CAM skills. I can prepare the part geometry and work toward a well-organized engineering study covering structural behavior, deformation, vibration and thermal conditions. My experience in 3D and architectural/mechanical design helps me interpret incomplete visual references and convert them into usable models while keeping assumptions visible. I will ensure the native CAD files and concise PDF report clearly document the model basis, material information, load and boundary-condition assumptions, and simulation results. Where applicable, results can be checked through mesh-convergence comparisons, hand calculations and consistency checks against expected physical behavior. I would be pleased to develop this component study in SolidWorks and provide the requested progress check and final report within an agreed schedule. Choose me to turn your sketches into a practical, clearly documented engineering model.
₹15,000 INR in 2 days
5.6
5.6

ANSYS simulation and CAD modeling are central to my mechanical design practice, making me well suited to convert your photos and dimensioned sketches into a defensible, simulation-ready component model. I can perform the coordinated structural, modal/vibration and thermal FEA in ANSYS, covering critical stresses, safety factors, deformation, natural frequencies, mode shapes, resonance risks, and steady-state or transient temperature behavior. My broader expertise in mechanical design, product development and CAD/CAM supports accurate geometry simplification and appropriate interpretation of material, loading and boundary conditions. I will validate the model through engineering checks such as mesh-convergence comparison, reaction-force and constraint verification, review of assumptions, and comparison with hand calculations or expected physical behavior where applicable. The deliverables will include a concise PDF report with results, assumptions and recommendations, together with the native CAD and ANSYS files. I can provide a short progress check within 2–3 days and the final report within 5–7 days, depending on model complexity. Choose me for an engineering-first FEA study that connects the supplied sketches to clear, practical design validation.
₹12,500 INR in 7 days
4.2
4.2

Hello, I can do this structural, vibration and thermal study of your part in ANSYS Workbench, and I work with SolidWorks for the CAD side. I am a design engineer working on LED luminaire design, so thermal analysis is a daily part of my work. My approach: 1. Build a simplified CAD model from your photos, sketches and dimensions. If any dimension, load case or boundary condition is missing, I will ask first and note every assumption in the report. 2. Run static structural (stresses, safety factors, deformation), modal (natural frequencies and mode shapes) and thermal (steady-state and transient temperatures) analyses. 3. Validate the model with a mesh-convergence check and a hand-calculation of a simple case (for example beam bending or lumped heat balance) compared with the simulation result. Deliverables: concise PDF report with results, assumptions and recommendations, plus native ANSYS and CAD files. Timeline: progress check with the model and mesh after 3 days, final report in 7 days. Price: 20,000 INR. I would like to work with milestone payments. Could you share the sketches and operating conditions (loads, temperatures, material)? Then I can confirm the details. Best regards, Fatih
₹20,000 INR in 7 days
3.6
3.6

Dear Client, As an Aerospace & Mechanical Engineer specializing in finite-element structural, modal, and thermal analysis (ANSYS Mechanical / Workbench), I am well prepared to build your CAD model from sketches and execute this coordinated multiphysics study. Technical Strategy A. Software: ANSYS Mechanical (FEA/Modal/Thermal). B. Evaluation: - Stress & Strength: Linear/nonlinear static solve mapping peak von Mises stresses, deflections, and yield safety margins. - Vibration: Pre-stressed modal analysis extracting fundamental natural frequencies, mass participation factors, and mode shapes to identify resonance risks. - Thermal: Coupled steady-state and transient thermal analysis tracking temperature field gradients and boundary flux against material limits. Timeline & Turnaround Progress Check (CAD & Mesh Setup): 48 hours from receipt of sketches. Final Deliverables: 4 to 5 business days (illustrated PDF report with pass/fail recommendations plus native ANSYS/CAD files). Ready to review your hand sketches and dimensions today! Best regards, Batuhan Akkova
₹33,000 INR in 5 days
2.7
2.7

Hello dear to do this task we can use ansys mechanical first me design model then i will do a high quality mesh then do boundry conditions after that we will get results which you need to do that we need 2 modules first mechanical to get stress and strain and second module modal analysis to get natural frequensy .thats my process chat me
₹12,500 INR in 1 day
2.1
2.1

My aeronautical engineering background and hands-on experience with ANSYS, CATIA V5 and SolidWorks make me well suited to create a reliable CAD model from your photos, sketches and dimensions, then evaluate the component’s structural, vibration and thermal behaviour in one coordinated study. I have designed aircraft components including fuselages, wings and swept-back wings, along with 3D mechanical parts, and have completed parts analysis and FEA/CFD work for manufacturing companies. I can provide the native CAD and ANSYS files together with a concise PDF report covering stress, deformation, safety factors, modal frequencies, mode shapes, temperature fields, assumptions and recommendations. Model accuracy can be checked by reviewing geometry and boundary conditions against your sketches and specifications, performing mesh-convergence checks, and comparing results with hand calculations or accepted engineering expectations where applicable. I can provide a short progress check after the initial CAD and setup review, followed by the final report and native files within the agreed timeline. I would be glad to apply my mechanical design and simulation experience to this component.
₹50,000 INR in 30 days
0.3
0.3

Hello, I can assist with CAD reconstruction and finite element analysis of your mechanical component using SolidWorks, ANSYS SpaceClaim, and ANSYS Mechanical. My proposed workflow includes: • CAD Modeling: Develop a simplified 3D model from your photographs and dimensioned sketches, preserving critical geometric features. • Structural Analysis: Evaluate stress distribution, deformation, and factor of safety based on the specified loads, supports, and material properties. • Modal Analysis: Determine natural frequencies and mode shapes, and assess potential resonance concerns using available operating data. • Thermal Analysis: Perform steady-state and transient thermal simulations to investigate temperature distributions under defined thermal conditions. • Verification and Reporting: Conduct appropriate mesh-sensitivity checks, review boundary conditions, document assumptions, and prepare a technical PDF report with results, limitations, and recommendations. Deliverables will include the agreed CAD model, simulation results, native project files, and engineering report. I suggest starting with a review of your sketches, material specifications, loading conditions, and thermal inputs to confirm feasibility and establish a realistic schedule. My priority is to provide technically meaningful results with transparent assumptions and appropriate verification. I look forward to discussing your project. Best regards, Mechanical Engineer | CAD & FEA Simulation
₹25,000 INR in 7 days
0.0
0.0

Your project’s CAD reconstruction is well aligned with my CAD/CAM skill set, allowing me to develop a simplified mechanical model from photos, sketches and dimensions before the simulation stage. My electronics engineering background also supports careful interpretation of material specifications, loads, boundary conditions and thermal constraints. I can support the coordinated preparation of the component model and the requested FEA study covering stress, deformation, safety factors, modal behaviour, resonance considerations, and steady-state or transient temperature fields. I will clearly document assumptions and use mesh refinement, boundary-condition checks and comparison against hand calculations or expected physical behaviour to validate model accuracy. The deliverables can include a concise PDF report with results and recommendations, together with the native CAD and simulation files. I will provide a short progress check during the work and a final report within the agreed schedule. I am ready to apply my CAD/CAM and engineering skills to produce a clear, traceable evaluation of your component.
₹12,500 INR in 2 days
0.0
0.0

Hi there, I can perform the complete CAD modeling and 3-in-1 FEA study (stress, vibration, and thermal) for your mechanical part using your hand sketches and specs. Software Used: CAD Modeling: CATIA (to build a precise 3D model from your sketches and dimensions) FEA & Modal: ANSYS Workbench (for Stress/Safety Factors, Natural Frequencies/Resonance, and Steady-State/Transient Thermal) Validation Strategy: Mesh convergence study ($h$-refinement) to guarantee grid independence. Static equilibrium, energy balance, and theoretical hand-calculation sanity checks. Turnaround Timeline: Progress Check (Day 2): CAD geometry, mesh layout, and load/boundary condition setup review. Final Delivery (Day 5–6): Complete engineering report (PDF with results, assumptions, recommendations) plus native CATIA and ANSYS files.
₹20,000 INR in 6 days
0.0
0.0

I work as structural engineer and I want to work on my free time, I'm using solidworks simulation for this work
₹20,000 INR in 7 days
0.0
0.0

Mechanical Designer | CAD Expert I help clients transform ideas into professional 3D models and manufacturing drawings. With extensive experience in product design, machine design, and industrial equipment, I deliver accurate, practical, and cost-effective CAD solutions ready for manufacturing. Services: 3D CAD Modeling Mechanical & Machine Design Product Development Manufacturing Drawings Assembly Design Sheet Metal Design Design Modification & Optimization Prototype and Production Support Let's work together to turn your ideas into reliable and manufacturable designs.
₹12,500 INR in 3 days
0.0
0.0

Dear Client, I have reviewed your requirements carefully. I will deliver a complete FEA study — Structural, Modal, and Thermal — in 10 days. MY APPROACH: • Build a simplified 3D CAD model from your photos/sketches (SolidWorks ) • Geometry review checkpoint on Day 4 for your approval before simulation • Run all three analyses in Abaqus2022 STRUCTURAL: Von Mises stress maps, displacement plots, safety factors (yield & ultimate), reaction forces — for all your load cases. MODAL: First 10+ natural frequencies, mode shapes, resonance-risk assessment against your excitation frequencies. THERMAL: Steady-state & transient temperature fields, heat-flux distribution, material limit verification. Thermo-structural coupling included if needed. VALIDATION: • Mesh convergence study (3 densities, <5% variation) • Reaction-force equilibrium check (<1% error) • Analytical benchmarks & peer review TIMELINE: Day 3 — CAD model review | Day 5 — Progress check | Day 10 — Final delivery DELIVERABLES: ✅ PDF engineering report (results, assumptions, recommendations) ✅ Native simulation files (ANSYS/SolidWorks) ✅ CAD model (STEP/IGES) Ready to start immediately upon receiving your inputs. Best regards, Khang Vi Nguyen
₹20,000 INR in 5 days
0.0
0.0

Hi I am a Professional FEA Engineer. I can conduct FEA on your mechanical parts with real boundary conditions. In your case there are 3 analysis included 1. Static Structural ( validate stress levels) 2. Modal Analysis (to identify critical Freq) 3. Steady state thermal condition (temperature distribution) I can perform all these analysis and can give you a complete report with root cause study. Please dm lets discuss in detail
₹20,000 INR in 7 days
0.0
0.0

Hello, I can complete a coordinated mechanical analysis in ANSYS Workbench 2024 R1. My experience includes mechanical product development, structural and thermo-structural FEA, thermal analysis, and SolidWorks CAD. I will review your sketches, dimensions, material data, loads, supports, and operating temperatures; build a simplified CAD model with assumptions confirmed; and run structural strength/deformation, modal, and steady/transient thermal analyses. I will document boundary conditions and mesh choices, check mesh convergence, and sanity-check key results against hand calculations and any reference or test data you provide. Deliverables will include a concise PDF with plots, findings, and recommendations, plus editable native project files. Please provide dimensioned sketches, material properties, load/support conditions, operating temperature range, and available validation data. I propose a progress update midway and delivery within 20 days after receiving complete inputs.
₹37,500 INR in 20 days
0.0
0.0

I am a Mechanical Designer with an extra-ordinary background in CAD/CAE/CFD and have ample knowledge and experience in these fields. Over the past seven years I have worked for numerous employers and global companies as a Product Designer and Analyst. I have been recognized for keen ability to improve component design, increase efficiency, optimize material and cost, automating design, decrease the need of re-engineering. I also have sounds skills and experience in the areas of Manufacturing Design and Mechanical Engineering. If employed by you I will deliver my best work for your benefit. Hire me today.
₹25,000 INR in 7 days
0.0
0.0

I can build the simplified CAD model from your photos and dimensioned sketches, then run all three studies (static stress, modal and steady/transient thermal) on one consistent model and mesh, so the results tie together in a single report. Software: FreeCAD 1.1 FEM with the CalculiX solver, cross-checked by hand calculations. What you will get: - Simplified CAD model (STEP + native) built from your sketches, with every assumption stated - Stress & strength: von Mises / principal stresses, deformation and safety factors for each load case - Vibration: first natural frequencies and mode shapes, resonance check against your operating speeds/frequencies - Heat: steady-state and transient temperature fields, checked against the material limits - Validation: mesh convergence study, reaction-force balance, and hand-calculation checks of peak stress and first frequency - Concise PDF engineering report with plots, pass/fail table and recommendations, plus model files Progress check: CAD model, mesh and first stress results in 3 days; final report in 7 days. About me: structural/mechanical engineer (MSc), 25 years of experience in FEA of steel structures, silos, platforms and mechanical components. Best regards, Timucin Toksoz
₹37,500 INR in 7 days
0.0
0.0

Hello, I'm Koichi, a master's researcher in computational mechanics at Yokohama National University. I develop/verify a Fortran FEM solver for nonlinear (elastoplastic) analysis — a coordinated stress, vibration and thermal study with validation is my normal work. Software, stated upfront: open-source toolchain — Gmsh (meshing), CalculiX/CCX (solver), ParaView (post-processing). CalculiX covers static, modal, and steady + transient thermal analysis in one model. Deliverables: concise PDF report plus native files (CAD/mesh, .inp decks (Abaqus-compatible), result files), all assumptions documented. I do not deliver ANSYS/SolidWorks native files; if those are mandatory, tell me before awarding. If a documented, re-runnable model is acceptable, I can start once I see the sketches. Plan: (1) Simplified CAD from your photos/sketches, simplifications all listed in the report. (2) Critical stresses, deformation, safety factors. (3) Frequencies/mode shapes and resonance risk vs your operating frequency. (4) Steady + transient temperature fields vs material limits. (5) Validation: mesh convergence (peak stress/temperature), reaction/energy balance, hand calculation for a simplified case. Milestones: 30% CAD+mesh+setup (check day 3), 40% analyses + validation, 30% report + files. Delivery day 7. Questions: (1) Can you share material grade, loads and thermal boundary conditions with the sketches? (2) Any operating/excitation frequency to compare the modal results against?
₹25,000 INR in 7 days
0.0
0.0

Bengaluru, India
Member since Oct 23, 2026
₹600-1500 INR
₹600-1500 INR
$25-50 USD / hour
£18-36 GBP / hour
$250-750 AUD
₹750-1250 INR / hour
$30-250 NZD
₹12500-37500 INR
$30-250 AUD
£20-250 GBP
$30-250 USD
₹750-1250 INR / hour
₹750-1250 INR / hour
$250-750 USD
$30-250 USD
$10-50 USD
₹12500-37500 INR
$30-250 AUD
₹12500-37500 INR
₹12500-37500 INR