Suoritettu

Model 2 Houses, and create 4 high quality exterior renders, and a walk through of each

Model two houses, so that we can easily visualize the finished product,

We want to make our Waihi beach house bigger, in New Zealand.

I have produced 2 sketch plans, attached

The plans show the nominal room sizes only.

Reduced levels of the ground level both now and proposed, and the floor level, soffit level etc are also shown

The windows shown are also nominal size only, and the plans are drawn only roughly to scale

Please note the floor level of the house will be 1.4m above the existing ground level.

The top photo is of the house as it is now. Note it is 2 stories and the ground story is made of concrete blocks, and the upstairs is weather board. The photo is taken of the southern side of the house.

The land level around the house is going to be built up about 1 to 1.2m, but we are going to retain the down stairs area, this photo shows roughly how the land will be built up

Board and batten exterior, painted light yellow

Roof Iron section, dark grey

The following info will also be required to complete the project;

• Internal wall thickness 100mm

• Exterior wall thickness 150mm

• Exterior Cladding Board and batten, picture to right, Light Yellow in colour

• Roof , Iron, section similar to picture at right

• Floor Thickness, House will have timber, Joists and floor boards, overall thickness 250mm

• Garage floor will be concrete, finished level 100mm above the ground level

• Internal doors, width 900mm, Ht 2m

• Windows to be standard off the shelf items, but with a 100mm wide frame around them

• Much information can be inferred between each of the plans, eg window sizes etc.

• I have included the exel spreadsheet, from which the PDFs were made, The grid created by the columns and lines on the spreadsheet are at 1m spacings

• The floor plan of the existing house is shown on the exel spreadsheet (“Lyndas Version” page)

I would like 4 high quality renders of the house, from the outside and a lower quality walk through video of the house showing the furniture benches etc

Taidot: Rakennusarkkitehtuuri, AutoCAD, 3D-renderointi, 3D-mallinnus, 3D-animaatio

Tietoa työnantajasta:
( 7 arvostelua ) Auckland, New Zealand

Projektin tunnus: #32652051

Myönnetty käyttäjälle:

(9 Arvostelua)
5.7

106 freelanceria on tarjonnut keskimäärin $1092 tähän työhön

(729 arvostelua)
9.9
(760 arvostelua)
10.0
(1001 arvostelua)
9.2
(444 arvostelua)
8.6
(432 arvostelua)
8.2
(72 arvostelua)
8.0
(138 arvostelua)
7.9
(164 arvostelua)
7.7
(124 arvostelua)
7.8
(278 arvostelua)
7.9
(444 arvostelua)
7.6
rachel3010

I read your project description and we can do Model 2 Houses, and create 4 high quality exterior renders, and a walk through of each as needed. We are the 3D expert over an experience of more than 6 years. We have sati Lisää

$750 NZD 6 päivässä
(212 arvostelua)
7.3
(150 arvostelua)
7.4
(111 arvostelua)
7.4
(205 arvostelua)
7.3
(101 arvostelua)
7.0
(136 arvostelua)
7.2
(224 arvostelua)
7.5
(175 arvostelua)
7.2
mircube

Hello! Ready to complete your task and act immediately. Submit the assignment, and tomorrow I will send the project for discussion. The last working draft is the design of an Italian restaurant "IL CAPRIANI" in Belgium Lisää

$750 NZD 7 päivässä
(173 arvostelua)
7.2