Photon Energy Measurement System

Suljettu Julkaistu 3 vuotta sitten Maksettu toimituksen yhteydessä
Suljettu Maksettu toimituksen yhteydessä

The system uses a small solar cell (4" square) to measure a matrix of LED's (2" square). The LED's (powered at various voltages) are stepped away from the solar cell in measured increments using a stepper motor. The declining solar cell voltages are recorded manually for processing on EXCEL. A working Phase 1 prototype (based on an Arduino 2560 Mega Processor) is available. A control panel contains push buttons and LED's. The attached picture is a second unit - not yet finished.

The programming task involves the operation of the slide mechanism with limit switches at both ends, the 4 buttons and 2 LED's located vertically on the right side of the control panel. I am reworking the slide mechanism on this unit.

I would like to discuss computer alternatives and programming estimates on a phased implementation.

Arduino Elektroniikka Mikrocontroller Sähkötekniikka PLC & SCADA

Projektin tunnus: #25924141

Tietoa projektista

17 ehdotusta Etäprojekti Aktiivinen 3 vuotta sitten

17 freelanceria on tarjonnut keskimäärin $390 tähän työhön

mechatronicsengr

Hi I hope you are doing well. I have expertise in embedded systems programming and I have worked on motor control system. I have worked on many controllers including Arduino. I have understood your project requirem Lisää

$529 USD 7 päivässä
(90 arvostelua)
6.9
noumanmehtab86

I can help you with this system. I have worked with controlling such systems multiple time. Come in chat to discuss

$300 USD 10 päivässä
(34 arvostelua)
6.6
ircrashed

Hello I have got your job posting “Photon Energy Measurement System Open” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the An Lisää

$250 USD 7 päivässä
(59 arvostelua)
5.9
consultotal

Hi i'm engineer, Internet of things, machine learning, networking, lighting, power distribution, automation and control expert, i have experience working in electromechanical systems and control - design and building, Lisää

$1100 USD 7 päivässä
(12 arvostelua)
5.6
JPACHECO28

Hi, Im an experienced developer, specialized in industrial automation I would really like to collaborate with you please chat me to talk about your project's details, I can warranty 100% satisfaction, thank you in adva Lisää

$300 USD 8 päivässä
(10 arvostelua)
4.7
macroenergy

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, Lisää

$200 USD 10 päivässä
(11 arvostelua)
4.6
baldofabio

Hi, my name is Fabio Baldo, I'm from Padova, Italy. I'm a senior developer in Industrial Automation. I know very well Siemens S7 and Siemens Tia Portal. I also know Codesys. I programming in Ladder and in St. I progra Lisää

$250 USD 7 päivässä
(4 arvostelua)
4.4
doroshchuk99

Hello, thank you for your job posting. I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Lisää

$750 USD 7 päivässä
(1 arvostelu)
4.2
ljayasooriya83

We are a team of electrical engineers and these calculations are very familiar to us. We are very good in using Matlab Simulink, Labview etc., We have helped a lot of students to get high marks in their academic works. Lisää

$600 USD 5 päivässä
(12 arvostelua)
4.1
stolzenterprises

A competent professional with 10 years of experience in Industrial Automation. Please find below Profile :-- Proficient in Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & comm Lisää

$222 USD 10 päivässä
(3 arvostelua)
3.7
AdelAGh

Hello, I'm an Electrical Engineer .I have many Experiences in Matlab, Microcontroller, Arduino , sensors ,PLC’s, SCADA system, circuit design , PCB ,also I have experience in programming that connect electronic to de Lisää

$250 USD 7 päivässä
(5 arvostelua)
3.0
agerald61

Hello, To get repeatable results, you should feed the LEDs with a variable "current" source, rather than variable "voltage" source. Recording the readings should be automated and pro grammatically inserted into an Exce Lisää

$200 USD 14 päivässä
(2 arvostelua)
1.8
PKonstiantyn

Hello, I am an Electrical and Electronics Engineer and I completed my master's degree. I designed many electronic circuits and led control and I have academic publications on this subject.I can handle t System proj Lisää

$250 USD 7 päivässä
(1 arvostelu)
1.8
princewallymoore

I am an Electrical Engineer with a masters degree and I have high proficiency in Electrical Engineering, HVAC, LTE system model, Thermal system design, FPGA, Verilog/VHDL, Matlab/ Simulink, Microcontroller, Modeling, o Lisää

$400 USD 3 päivässä
(0 arvostelua)
0.0
danish202

Hi, I am an experienced and Certified PLC programmer having vast experience of programming different brands of PLC'S and HMI. I have carefully read and understood your requirements. It will be pleasure to work with yo Lisää

$278 USD 10 päivässä
(0 arvostelua)
0.0
rjrajbir24

Wow, Seems like an amazing opportunity !!! My Name is Rajbir Singh an experienced Embedded and IoT Engineer. You would be happy to know that I have more than 5 years of experience working with the Arduino/Steppers/Ser Lisää

$250 USD 7 päivässä
(1 arvostelu)
0.0