Auki

I need a program written (code only) for one Arduino Mega for 3 Stepper Motors, 3 Rotary Encoders and 3 Hall Sensors

I need a program written (code only) which can run 3 Stepper Motors, 3 Rotary Encoders and 3 Hall Sensors, in the same arduino.

Function :

There are 3 stepper motors which turns 3 rotating structures. (3 rotary encoders also attached).

When i turn on the power, each motor must start turning until it reaches the hall sensor.

Once it reaches the hallsensor position, all motor stops. and the rotary encoder resets to zero.

It wait for 5 seconds, then each motor starts turns the structure, in following ways randomly.

>First and third motor turns same direction, while second turns opposite.

> Same above in reverse

>All motor comes to same position and wait over a delay.

>All motors rotate random speed in one direction, at last stop over one position and wait over a delay.

When the motor is rotating, the rotary encoders attached to the motors will be sending serial data over usb to the windows pc.

format of serial data:

position of encoder1, encoder2, encoder3, hall sensor data,

Example:

2568,4854,2568,0

2569,4855,2569,0

2570,4856,2570,1

Sample of the model, which i saw over internet : [login to view URL]

Taidot: Arduino, Mikrocontroller, elektroniikka, C-ohjelmointi, C++ -ohjelmointi

Näytä lisää: need program written, need program pharmacy mgt open code vbnet, need program written website, need coder can code important program, code arduino mega, arduino mega sm5100b code, i need a css code, i need a matlab and c code is to be written, i need a matlab and c++ code is to be written, i need existing source code for a job portal to be delivered in 1-2 days, i need existing source code for a job portal to be delivered in 12 days, i need programmer write code, i need a swift code, i need a good code writer for app, i need a quick code for wordpress, i need articles written, i need a written article of publication, i need a written articles, i need programer for code

Tietoa työnantajasta:
( 4 arvostelua ) Diera, United Arab Emirates

Projektin tunnus: #20759161

25 freelanceria on tarjonnut keskimäärin %project_bid_stats_avg_sub_26% %project_currencyDetails_sign_sub_27% tähän työhön

maxbul

I have made more than 150 Arduino-based projects on different freelance stocks. I work with Arduino since 2010 and have more than 25 years of experience in programming and electronics. Please feel free to contact me in Lisää

$80 USD 5 päivässä
(80 arvostelua)
5.8
hayat38402

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • ID Lisää

$20 USD 7 päivässä
(23 arvostelua)
5.3
LTEDeveloper

Hello, My name is Andrei, i am a Romanian IOT Developer with a lot of experience in IOT projects and automatics . I have read your requirements , i can do it and test it on my lab in a short time . please tell em Lisää

$30 USD 3 päivässä
(22 arvostelua)
5.2
Mestek

hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 8 years in arduino and electronics,i have read ur description and can do the required project for ur stepper using Lisää

$30 USD 2 päivässä
(18 arvostelua)
4.6
randomcreators

Greetings, I can give you in a few hours and we can wrap the work by tomorrow. I can even do the mechanical design to make exactly the same to work with this hardware. message me back so we can discuss and begin if eve Lisää

$50 USD 2 päivässä
(5 arvostelua)
4.0
mvish88

Hello, I have fully read your requirement and got everything. I can do this project. please message me , we can have discussion over your project. Thankx.

$133 USD 20 päivässä
(6 arvostelua)
3.5
AndreySer

Hello , i'm have done the same work , where i used Atmega64 (RS485) -> ModBus -> ServoController and StepperController <-> Motors

$150 USD 3 päivässä
(5 arvostelua)
3.4
kahan1994

Hi, I am kahan. I am embedded developer and have much experienced in hardware and software side. Waiting for further discussion. Thank you.

$25 USD 7 päivässä
(6 arvostelua)
3.0
Darvos

Hello, automation engineer! I can help you with your project, highly skilled arduino programmer here!

$55 USD 5 päivässä
(3 arvostelua)
2.8
harisjamal1995

Hello Sir I am a Mechatronics engineer and I have a lot of experience dealing with these things like encoder, motor controllers and halleffect sensors. I will definitely deliver your work on time. I will be pleased to Lisää

$20 USD 1 päivässä
(1 arvostelu)
2.2
drishinfotech

Hi I read your job description according to that I am sending my expertise in the IoT domain. I have 3+ year of experience in the followings:- I can efficiently program with Microcontrollers that includes Arduino and Lisää

$242 USD 7 päivässä
(2 arvostelua)
2.3
finest2019

Dear client. I have just read your requirement at carefully. I 'm a full stack and full time developer. Especially, I like C, C++ and C# languages because these are my hobby and main skills. Owing to my experiences ove Lisää

$300 USD 3 päivässä
(2 arvostelua)
1.8
Techexpert1234

A qualified electrical engineer with excellent academic background, practical knowlege and ability to do complex tasks effectively. My aim is to provide my clients the best work and satisfy them. Fields of Interest: Lisää

$20 USD 1 päivässä
(0 arvostelua)
0.0
brzi9

I saw your requirements and I will be able to deliver on your project. I would like to discuss further details of the project.

$15 USD 2 päivässä
(0 arvostelua)
0.0
abdallafarouk1

I made many arduino projects before like a hydroponic irrigation system using moisture sensor to monitor water level and water pump to pump water when needed as will as servo motor to open the lock that prevent water f Lisää

$15 USD 2 päivässä
(0 arvostelua)
0.0
Shaheers

Hi, I am Electronics Engineer, i have been working one similar projects for several years, please tell me hall effect sensor and stepper motor driver you are using wile accepting my offer. Thanks

$20 USD 2 päivässä
(0 arvostelua)
0.0
MElmohandes

i made project like that before

$25 USD 1 päivässä
(0 arvostelua)
0.0
EmbeddedAToZ

Hi friend. I have read your requirements. I am sure that I can complete this job within the given timeline. I have more than two years of experience in embedded system and arduino. Throughout my career I have completed Lisää

$10 USD 3 päivässä
(0 arvostelua)
0.0
lapritsingh

I spend two years on making the heavy mechatronic projects. for more information please check my profile or portfolio. and message me after your message I will deliver your code in one or two days

$50 USD 2 päivässä
(0 arvostelua)
0.0
jassem1995

i can make you project as fast as possible and also i can help you in any project in any project in the futur

$10 USD 1 päivässä
(0 arvostelua)
0.0