Arduiono “Pool water temperature Control” (Cooling + Heating)

In the Files section you will find following attachments that must be read before bidding

(1) Requirement Document in PDF # 1 format - This is for Relay 1-7. IN addition there is another Pdf where requirement of Relay # 8 is given. Please read both PDF.

(2) Zip file containing two sketches. One for Arduino and one for ESP Node MCU. This will be your starting point and the prototype sketches have been built to help you understand requirement clearly and to complete the project quickly.

(3) a total of five images of Pool setup and Display unit requirement, image of Blynk APP, ThingSpeak, Pin out diagrams as is used for initial setup of the two sketches.

Expectation is that you understand the requirement and complete the missing logic in the code as per the requirement document.

The project must be bid only if you have the following sensors with you so that after testing you can also share the screenshots of the Serial Monitor output to be tested at my end.

(1) Arduino Nano

(2) ESP - Node MCU 1.0

(3) DHT11 or DHT22

(4) RTC - DS3132

(5) One Wire temp sensor DS18B20 at least two, preferably three.

(6) 8 Module Relay board 5v

(7) Suitable Display

(8) Two Micro Switches

Milestones: As this is a short project that requires tweaking and finalisation of the sketches, there will be only two Milestones proposed.

(1) Start of the project

(2) End Point (as per Criteria given in Test cases of requirement document)

Expected duration to complete the project is Two weeks at the max though it can be completed in a day if you have all that is needed above.

Taidot: Arduino, elektroniikka, Mikrocontroller, sähkötekniikka, Piirilevyn asettelu

Näytä lisää: microcontroller heater temperature control design, 16f84 maintain water temperature program, university projects temperature control, programming microcontroller water level control, auto tuned pid software algorithm language temperature control, autotuning pid temperature control working, microchip pid temperature control, pid code temperature control, pid temperature control, project temperature control pid, temperature control, temperature control autotune, temperature control pid pic, writing temperature control, water temperature controller using pic, water temperature control project arduino, temperature control using pid controller in labview, temperature control using pid controller in matlab, arduino water temperature control

Tietoa työnantajasta:
( 0 arvostelua ) Delhi, India

Projektin tunnus: #22287753

Myönnetty käyttäjälle:


Hello Sir I am a Mechatronics engineer and I have a lot of experience dealing with these things. I have see all of your requirements. I can do your work very professionally. I will definitely deliver your work on time Lisää

₹5000 INR 3 päivässä
(6 Arvostelua)

15 freelanceria on tarjonnut keskimäärin 9600₹ tähän työhön


Hi, how are you? Thanks for your project. I've read your description carefully, and I'm very interested in your job. I have been developing many firmwares using Arduino for 5+ years. Please have a look at my profile, t Lisää

₹7000 INR 7 päivässä
(49 arvostelua)

Hello I have all components. I can send to you the codes , Connections diagram and help to you to setup the codes and Connections on your side. You can message me anytime. Thanks, Chanchal Kumari

₹12222 INR 15 päivässä
(34 arvostelua)

hi there i can help you in this project

₹15000 INR 15 päivässä
(12 arvostelua)

Hi, I have 13 years experience in embedded system and firmware development. I have done few IOT projects using arduino,blynk,thigspeak and shared photos of my completed projects done with ESP8266. Relevant Skills and Lisää

₹12500 INR 15 päivässä
(8 arvostelua)

I am an EE engineer. I have a background in digital design. I also worked with microcontrollers such as MSP430, Arduino, PIC, etc. I have lots of experience working with Xilinx and Altera FPGA boards writing VHDL and e Lisää

₹7000 INR 7 päivässä
(10 arvostelua)

I will take maximum seven days to complete this project as well as I show you simulation on Proteus software. I already done that type of project in past. I'm electrical engineer and I'm very confident I will do it. Lisää

₹10000 INR 8 päivässä
(14 arvostelua)

Im electronics and communications engineer from Cyprus. This project is easy for me if everything is ok hire me!

₹7777 INR 1 päivässä
(1 arvostelu)

We are Innovative Organisation please visit our website [login to view URL] Relevant Skills and Experience We are Innovative Organisation please visit our website [login to view URL]

₹10555 INR 7 päivässä
(0 arvostelua)
₹5555 INR 14 päivässä
(0 arvostelua)
₹5555 INR 10 päivässä
(0 arvostelua)
silicolabs have done similar tasks on Arduino, Raspberry pi lets discuss will do all.

₹12500 INR 7 päivässä
(0 arvostelua)

I have done several projects on Arduino and IoT using node mcu things speak and blync. I can provide you with the source codes and the schematic diagrams needed to set up the project at your end.

₹11111 INR 5 päivässä
(0 arvostelua)

Hi, I'm a Mechatronics Engr. I've read all your requirements and needs. I've all the components mentioned above so to complete the task. In past I've done similar tasks. I can easily complete your task in 7 days with r Lisää

₹11111 INR 7 päivässä
(0 arvostelua)

We are a team of professionals passionate about technology, innovation, and customer delight. We deliver extraordinary results for future services and products. Our panache lies in the seamless integration of technolog Lisää

₹11111 INR 12 päivässä
(0 arvostelua)