
In Progress
Posted
Paid on delivery
I need to fix the antenna connection trace on a small modem board that uses a BC660K. Band 28 (700 to 800MHz) straight to a uFL connector. No filters, tuning stubs, or additional components are required—just a clean 50 Ω trace and the connector footprint. Key parameters I must hit: • Trace is for a short cable to an external antenna, so keep the run as direct as possible and maintain controlled impedance. • The stack-up will be JLCPCB’s 4-layer, 1.6 mm FR-4 option. Please work within their standard prepregs and copper weights. • Only Band 28 (≈700 MHz) is in scope, so length matching to other bands is not needed. Deliverables 1. Fixed trace on the board Acceptance criteria • 50 Ω trace verified by your chosen CAD’s impedance calculator for the specified stack-up. If you’ve done RF breakouts or antenna feed boards before, this should be quick. Let me know which CAD package you’ll use and roughly how soon you can turn the files around.
Project ID: 40802354
18 proposals
Remote project
Active 1 min ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
18 freelancers are bidding on average $124 NZD for this job

Your BC660K Band 28 antenna feed requires careful PCB layout rather than general board routing, and my skills in Circuit Design, Electrical Engineering, Electronics, and PCB Layout are directly aligned with this work. I can fix the uFL connector footprint and route a direct 50 Ω trace for the 700–800 MHz connection while keeping the layout clean and suitable for an external antenna cable. I will work with the specified JLCPCB 4-layer, 1.6 mm FR-4 stack-up and verify the trace width using the impedance calculator in the selected PCB CAD environment. Since no filters, tuning stubs, or matching components are required, I will keep the RF path short and uninterrupted, with the final board layout meeting your stated acceptance criterion. I am ready to apply my electronics and PCB layout experience to this focused RF breakout correction and deliver the fixed board files efficiently.
$66 NZD in 1 day
5.6
5.6

Hello, PCB layout and circuit design are the core skills I would apply to your BC660K-uFL antenna connection, with the work focused precisely on the short Band 28 RF path and clean connector footprint you specified. I can design the direct 50 Ω feed on the JLCPCB 4-layer, 1.6 mm FR-4 stack-up, using the specified copper and prepreg parameters in the CAD impedance calculator. My PCB layout and electronics background is suited to producing a manufacturable trace while keeping the routing compact and avoiding unnecessary components, tuning stubs, or band-matching work outside your scope. I would be pleased to correct the antenna trace and provide the updated PCB layout files with the impedance calculation supporting the 50 Ω target. Best Regards, Sakshi
$60 NZD in 1 day
5.1
5.1

My PCB layout and electrical engineering skills are directly suited to correcting this BC660K antenna feed and uFL connection. I can work in Altium Designer to create a clean, direct 50 Ω controlled-impedance trace for the Band 28 path, while keeping the connector footprint and compact modem-board layout in focus. My experience with PCB layout, circuit design, electronics, and antenna design supports the specific requirements of a short RF breakout: no unnecessary filters or tuning components, an appropriate trace geometry, and verification using the specified JLCPCB 4-layer, 1.6 mm FR-4 stack-up and copper/prepreg parameters. I will provide the corrected board layout with the impedance calculation supporting the 50 Ω target.
$120 NZD in 2 days
4.9
4.9

Our PCB layout and electrical engineering skills directly match this BC660K antenna feed correction, where a clean connector footprint and controlled 50 Ω routing are the essential requirements. I can work with the specified JLCPCB 4-layer, 1.6 mm FR-4 stack-up and keep the Band 28 path short and direct to the uFL connector. I will use a suitable PCB CAD package with an impedance calculator to verify the trace width against the selected JLCPCB dielectric and copper parameters. My background in circuit design, electronics, and PCB layout supports accurate RF breakout work while avoiding unnecessary filters, stubs, or components outside your scope. I would be glad to complete the trace and connector footprint update and provide the corrected board files with the 50 Ω verification.
$88 NZD in 2 days
4.6
4.6

I have experience in PCB design, motion control circuits, and electrical isolation. I have a dedicated hardware lab for testing and validation. I'd be happy to explain my previous projects and share relevant work examples. A BC660K feed to uFL on JLCPCB 4-layer at 700MHz is a straightforward job if the impedance calc is done properly against their actual stack-up, not a generic one. → I've done RF breakouts and antenna feeds on nRF and ESP32 boards, so 50Ω controlled impedance is familiar ground → I'll fix the trace on your board in KiCad and verify it with the built-in impedance calculator against JLCPCB's 1.6mm 4-layer prepregs → Files back to you within 3-4 days, gerbers and stack-up notes included Looking at roughly $120 for this. Happy to jump on a chat and see if I'm a good fit. No pressure.
$120 NZD in 3 days
3.2
3.2

Hi, This is a clean, well-scoped job and I can turn it around quickly. Approach: I’ll route the RF trace on the JLCPCB standard 4-layer 1.6 mm FR-4 stack-up (JLC04161H-7628 or equivalent). The typical configuration gives a 0.1 mm ground-plane spacing on L1→L2 (prepreg ~0.11 mm, εr ≈ 4.2), which puts a 50 Ω microstrip at roughly 0.19–0.21 mm trace width on 1 oz copper — I’ll verify the exact width against JLCPCB’s published impedance calculator before finalizing. The trace will run on the top layer with an unbroken ground flood directly beneath on L2, no voids or cutouts under the RF path. I’ll keep the run as short and direct as physically possible given the BC660K RF pin placement and your uFL connector footprint. What you’ll receive: EasyEDA (or KiCad — your preference) source files Gerbers + drill files ready for JLCPCB upload A screenshot of the impedance calculator result confirming 50 Ω for the chosen trace width/stack-up Timeline: Files within 1–2 business days of project start. The scope is narrow and there are no matching stubs or filter components to place, so there’s very little back-and-forth needed. I’ve done RF feed traces and antenna breakouts on several ESP32/cellular boards and understand the importance of keeping the reference plane intact under the trace. Happy to discuss footprint sourcing for the uFL connector if you don’t already have one. Looking forward to it. XinTian
$199 NZD in 2 days
3.4
3.4

Hello, I have worked on several RF products & other industrial products with RF including BC660K. I can share examples once you connect. I will use Altium/ Kicad to route the trace. I can easily route the trace matching to 50E at 700MHz. I will verify that with available impedance tools before delivering you & maintain stack up as per JLCPCB. I carry 20+ years of design & development experience. I specialize in precision & low noise analog, low power electronics, power supplies, high speed & long-life battery IoT products. Please see my works & profile below, https://www.freelancer.in/u/JagdishCK Finally, I will route the trace handover layout, Gerbers in Altium/ Kicad in quoted price. Regards, Jagdish Karamchandani
$150 NZD in 3 days
3.0
3.0

I have experience in PCB design, RF circuit layouts, and hardware development. I can review your uFL antenna connection, identify trace issues, and make the necessary PCB layout corrections while maintaining proper RF routing and signal integrity. I also have access to an in-house hardware lab for testing and validation. I can share my previous PCB design work to demonstrate my experience. → I'll keep the trace short and direct, set to 50 Ω on JLCPCB's 4-layer 1.6mm stack, verified in KiCad's impedance calculator → Clean uFL footprint and no extra parts, just the trace and connector
$100 NZD in 2 days
3.0
3.0

For a 700 MHz run to a uFL, the usual fix is a short 50 ohm microstrip on the top layer over an unbroken ground plane, with ground vias around the connector pad. I'll size the trace width from JLCPCB's 4-layer 1.6 mm stackup, check it in the impedance calculator and send back the updated files. I'll work in Altium or whatever format your project is in. I can turn it around in about 2 days. Some of my PCB boards are in my portfolio. Could you share the board files?
$60 NZD in 2 days
0.5
0.5

Hi, Sir. The critical part of this job is keeping the antenna feed at 50 Ω without creating unnecessary bends or impedance discontinuities near the uFL connector. I have encountered similar issues where an otherwise simple RF trace lost consistency because the connector transition was not properly considered. I would use KiCad or Altium Designer to check the JLCPCB 4-layer stack-up, calculate the required trace width, and create a direct 50 Ω feed to the uFL footprint. You will receive the corrected PCB layout and updated manufacturing files. Could you share the existing board files so I can check the current routing? Best regards,
$50 NZD in 3 days
0.0
0.0

Hi! I can help you refine the BC660K antenna feed and uFL connector footprint, ensuring a clean, direct 50 Ω transmission line for Band 28. I’ll use KiCad to calculate and verify the trace impedance against JLCPCB’s 4-layer, 1.6 mm FR-4 stack-up and standard copper weights. I’ll also keep the routing as short and straightforward as possible, without adding unnecessary components or tuning structures. I can review the board layout and provide the updated PCB files along with the impedance calculation results. Once I have the existing PCB files and stack-up details, I can confirm the turnaround time and get started.
$140 NZD in 2 days
0.0
0.0

Wellington, New Zealand
Payment method verified
Member since Jul 11, 2023
$10-300000 USD
₹1500-12500 INR
$30-250 NZD
$30-250 USD
₹12500-37500 INR
$250-750 AUD
₹1500-12500 INR
£150-350 GBP
$1500-3000 USD
₹600-1500 INR
$250-750 USD
$3-10 NZD / hour
$10-50 USD
$10-30 USD
₹1500-12500 INR
$5000-10000 USD
₹1500-12500 INR
$10-30 USD
$10-30 USD
₹1500-12500 INR