
In Progress
Posted
I want to run an open-source Chinese LLM—most likely Qwen, Deepseek, or Kimi—entirely under my own roof for document analysis, document preparation, and workflow management. My main priority is the hardware side: advising me on whether to buy a single GPU for the long haul, rent a cloud GPU, or start with a more modest card and upgrade later. All three options are on the table, so I need a clear comparison of cost, VRAM requirements, and expected performance. Once the hardware decision is made, I’ll need hands-on help getting the chosen model installed, optimised, and benchmarked on that setup. That includes configuring the runtime, loading the model weights, and confirming that everything runs smoothly on my local network. After it works, please walk me through everyday usage—prompting, fine-tuning on my own documents, setting up retrieval-augmented generation for PDF and Word files, and basic troubleshooting steps I can repeat later. Freelancers based in Singapore or similar timezone will be preferred. Key deliverables • Hardware recommendation report with buy/rent links and a simple ROI breakdown • Full installation and configuration of the selected model on the agreed hardware or cloud instance • Performance test results (latency, token throughput, VRAM usage) • One live call or screen-share to demonstrate workflows and a follow-up session to answer additional questions If you’re fluent with Chinese LLMs and small-scale self-hosting, I’m ready to get started. Hourly rate is indicative only and based on my very limited experience. If you have a different rate, please put that in your response.
Project ID: 40755507
20 proposals
Active 16 hours ago
Location: Singapore
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Hello, You need a Chinese open-source model (Qwen or DeepSeek) fully on-prem for document analysis, drafting, and workflow, plus a clear buy-vs-rent GPU decision. I can deliver that. Plan: Hardware note first: buy one GPU, rent a cloud GPU, or start small and upgrade. Cost, VRAM, and expected speed, with links and a simple ROI. Full-size Kimi is not realistic on one consumer card. I will say so. Install and tune the chosen model (Ollama or vLLM), load weights, and serve it on your LAN. RAG for PDF and Word, prompting for analysis and drafting, and a light fine-tune only if your files and GPU justify it. Benchmarks (latency, throughput, VRAM), a short runbook, one demo call, and one follow-up. I work with local Chinese LLMs, quantization, RAG, Docker, and Linux. Hardware note in 2–3 days, then install and handover.
$1,600 SGD in 21 days
0.0
0.0
20 freelancers are bidding on average $110 SGD/hour for this job

Hello, I have reviewed your project requirements for setting up a local Chinese AI model for document analysis and workflow management. Let's chat and discuss it further. To handle your project, I will start with evaluating the best hardware option for your needs, whether it's a single GPU, cloud GPU, or a more modest card with the potential for upgrades. Once decided, I will proceed with the installation, optimization, and benchmarking of the selected model on the chosen setup. The key deliverables will include a hardware recommendation report, full model installation and configuration, performance test results, and live demonstrations of workflows with follow-up sessions for any queries. Before signing-off my bid, I would like to ask a question, i.e., Are you open to exploring additional features or functionalities for the AI model setup? Best Regards, Aneesa.
$20 SGD in 40 days
6.9
6.9

Hi, I can help you compare a local GPU, cloud GPU, and upgrade-later setup using VRAM, model size, speed, running cost, and long-term value. I’ll then install the selected Chinese LLM, configure the runtime, load the weights, test latency, token speed and VRAM use, and make sure it works across your local network. I can also set up document processing for PDF and Word files with retrieval-augmented generation, explain prompting and document fine-tuning, and leave you with simple troubleshooting steps. My work will focus on reliable Cloud Computing, Automation, Data Processing, and Troubleshooting rather than just getting a model to start once. I’m comfortable working with Qwen and DeepSeek-style local deployments, and can cover Kimi after confirming its available self-hosting option. My rate is SGD 30/hour. Will the documents contain sensitive data that must stay fully offline, and roughly how many users will run the model at the same time? Please start a chat and let’s discuss your current hardware, document volume, and preferred model.
$30 SGD in 8 days
5.5
5.5

Hi There, Hope you are well. I can provide hardware recommendation, model installation, configuration, performance testing, and workflow demonstration for your Chinese LLM project. Based on my experience, I can offer guidance and support for your self-hosting needs. Let's discuss further details and rates to get started efficiently. Thanks in advance for the opportunity to working with you. Best Regards, Serazum
$30 SGD in 1 day
4.1
4.1

Thank you for considering Nexora Technologies for your Local Chinese AI setup project. As an AI-focused technology solutions company, we have an exceptional track record in AI Development and Machine Learning. Our expertise aligns perfectly with the deep learning algorithms and model optimization your project requires. With regards to your hardware decisions, we are well-versed in current GPU options, cloud computing solutions and can provide a comprehensive cost-performance analysis to help you make an informed decision. This includes assessing the VRAM requirements, expected performance based on different configurations and providing a simple ROI breakdown. We understand the importance of not just installation but also practical familiarity with the chosen model, so we offer tailored tutorials and dedicated post-installation support to ensure your team is fully empowered to make the most of the setup. Our live call and screen-share sessions will guide you through workflows, while our follow-up session leaves no stone unturned in answering any subsequent queries. Being based in a similar timezone (Singapore), we guarantee ease of communication and prompt response times. Let Nexora Technologies help you optimize your Local Chinese AI Model Setup; let's bring document management and workflow efficiency to new levels together. Only results matter, not hourly rates!.
$20 SGD in 40 days
3.5
3.5

Hi there, The hard part is not selecting the right LLM; it’s ensuring your hardware can support its needs effectively. I can provide a detailed comparison of buying a GPU versus renting cloud resources, focusing on cost, VRAM, and expected performance based on your use case. Once we finalize the hardware, I’ll assist with the installation and configuration of the chosen model, including runtime setup and model weight management. I’ll also guide you through practical usage, covering prompting, fine-tuning, and setting up retrieval-augmented generation for your documents. Could you share any specific performance metrics or capabilities you’re looking to achieve with this setup? Thank you.
$25 SGD in 40 days
2.7
2.7

Hi there, I hope this message finds you well. I am excited about the opportunity to assist you with setting up a local Chinese AI model for document analysis and workflow management. Your project requirements align perfectly with my expertise in AI Model Development, Machine Learning, and Cloud Computing. I understand your need to evaluate the most cost-effective and performance-efficient hardware solution for hosting an LLM like Qwen, Deepseek, or Kimi. I will provide a detailed comparison of purchasing a dedicated GPU, renting a cloud GPU, or starting with an entry-level card, focusing on costs, VRAM needs, and expected performance. Once the optimal hardware is selected, I'll ensure the seamless installation and configuration of your chosen model, optimizing performance to meet your specific needs. We'll conduct thorough performance tests and I'll guide you through the usage process, including everyday operations like prompting, fine-tuning, and retrieval-augmented generation for your documents. My experience with Chinese LLMs and self-hosting solutions positions me well to deliver this project effectively. I’m committed to providing a comprehensive hardware recommendation report, assisting with installation, and offering insightful demonstrations and support to ensure you can confidently manage the system. Looking forward to collaborating on this exciting project. Best Regards,
$20 SGD in 10 days
2.8
2.8

Your project requires a clear comparison of hardware options for running a Chinese LLM, and I can help guide that process. First, I will research the GPU alternatives, considering cost, performance, and VRAM needs to provide a tailored recommendation. After deciding on the hardware, I can assist in installing and optimizing your chosen model, ensuring it runs efficiently on your local setup. I will also provide documentation for everyday usage, including prompting and fine-tuning. My experience in deploying AI models and using cloud services aligns well with your requirements. For similar work, please see my AI-powered project here: https://www.freelancer.com/portfolio/AI-SEO-SaaS. Let's schedule a time to discuss your specific needs in more detail. What specific tasks are you most concerned about in the AI model setup?
$20 SGD in 7 days
1.4
1.4

I can deliver 'Local Chinese AI Model Setup' end to end — clean architecture, tests, and deployment. I'll start with a short plan, share progress daily, and hand over production-ready code. Could you confirm your timeline and must-have features so I can lock the scope?
$23.75 SGD in 7 days
0.0
0.0

Hi, there. I successfully deployed a Qwen Chinese LLM on a mid-range GPU for document analysis and workflow management, achieving 80% of production performance with 30% reduced VRAM usage. Features implemented included custom runtime optimization, model pruning, and efficient data loading. Challenges were mitigated by leveraging multi-threading and asynchronous processing, resulting in a 40% boost in token throughput. I plan to apply similar techniques to your project, leveraging the latest GPU architectures and cloud pricing models to optimize performance and cost. I offer to provide a detailed hardware recommendation report, including a simple ROI breakdown, to inform your hardware decision. I will also assist in installing and configuring the chosen model on your selected hardware or cloud instance, ensuring smooth performance and optimal VRAM usage. Performance test results, including latency, token throughput, and VRAM usage, will be provided to ensure optimal performance. One live call or screen-share will be scheduled to demonstrate workflows and answer additional questions. If I use my previous experience, your project will likely be completed successfully. Hope to discuss this in detail. Through detailed discussion, I think I can find the better solution to finish your project successfully. Thank you.
$20 SGD in 40 days
0.0
0.0

I’ve deployed self-hosted Qwen and DeepSeek document assistants using Docker, Ollama, and GPU-backed RAG pipelines, including Chinese PDF and Word retrieval. For this project, the key is sizing VRAM against the target model and concurrent workload, because that determines whether local ownership or cloud rental gives the best value. I’ll produce a practical GPU buy-versus-rent comparison with ROI, VRAM tiers, expected throughput, and suitable Singapore-region cloud options. I’ll then install and optimize the selected runtime, model weights, embeddings, and local-network access. You’ll receive benchmark results for latency, tokens per second, and VRAM use, plus a live walkthrough covering prompting, document ingestion, RAG, fine-tuning options, and repeatable troubleshooting. My rate can be agreed based on the final scope. Thanks, Kittipong
$25 SGD in 28 days
0.0
0.0

Hi, Your rate range works for me, and I can work during Singapore hours. My honest advice on hardware is to rent a cloud GPU for one week first and test which model size gives you good enough results on your own documents. A Qwen model at 14B or 32B size runs well on one 24GB card, like a used RTX 3090, which is much cheaper than buying new. The full DeepSeek and Kimi models are far too big for home hardware, so locally you'd use their smaller versions. Buying before testing is how people end up with a card that's either too weak or way more than they need. Setup would take about 2 days. That covers installing the runtime, loading the model and running the benchmarks for speed and VRAM use, plus RAG for your PDF and Word files. For most document work, RAG gives you what you need without fine-tuning, so I'd start there and only fine-tune if the answers still miss. You'll get the hardware report with costs and ROI, the test results and the live call to show you the daily workflow. I've set up AI integrations for clients before, including an AI chat feature that was rated 5 stars. I've also done local model setups similar to this, and I'm happy to show you more if you contact me. I can start work right away. Contact me to discuss more details. Thanks. Smit
$25 SGD in 40 days
0.0
0.0

I can help you turn this idea into a practical, private document assistant, with clear guidance on hardware choices, costs, and everyday use. I’m based in China, in the same UTC+8 time zone as Singapore. I can review Chinese-language model documentation directly and explain the relevant options and trade-offs in clear English. I would start with your actual document tasks and a representative sample, then recommend suitable models and compare buying a GPU, renting cloud hardware, or starting with a smaller setup. The recommendation would explain what each option can handle, its limitations, and when an upgrade would be worthwhile. For your PDF and Word collection, I would assess document retrieval and fine-tuning separately, so you understand which approach fits your needs before spending on hardware or training. After we agree on the approach, I would remotely configure the selected setup, measure its performance, and demonstrate how to add documents, use the system, and troubleshoot common issues. You would receive a hardware recommendation, a working setup, benchmark results, and practical instructions, followed by a walkthrough and one follow-up session.
$40 SGD in 40 days
0.0
0.0

Hi there, I'd like to take on this self-hosting project. I'm based in China (UTC+8) — the same timezone as Singapore — so we can work together with zero time-zone friction. I run my own AI/LLM API platform, so I'm fluent with Qwen and DeepSeek models and LLM workflows, with hands-on Linux/GPU deployment experience. Here's what I'll deliver: 1. **Hardware report**: clear comparison of buy-one-GPU vs cloud GPU vs start-modest-and-upgrade — cost, VRAM and expected performance for Qwen/DeepSeek/Kimi — with links and a simple ROI breakdown; 2. **Deployment**: chosen model installed and configured on your hardware/cloud — runtime (Ollama/vLLM), weights loaded, sensible quantisation, verified working on your local network; 3. **Benchmarks**: latency, token throughput and VRAM usage measured and reported; 4. **Training**: a live call/screen-share covering prompting, fine-tuning on your documents, RAG for PDF/Word, and repeatable troubleshooting — plus a follow-up session. **My rate:** SGD 30/hour. Alternatively, I can offer a fixed project package — happy to discuss a total that fits your budget. To start, please share your preferred model, approximate document volume for RAG, and any hardware you already have in mind — I'll prepare the comparison right away. Looking forward to working with you.
$30 SGD in 40 days
0.0
0.0

I build and run these systems myself: Luvira, my contract law application with retrieval over legal text; Galdai, speech-to-text and extraction; and Mayan EDMS, an open-source document management backbone with OCR and workflows. PhD in physics, FRM, MBA, former CTO of a Singapore deep-tech company. This is work consulting firms bill at several hundred dollars an hour; I take on a few projects independently because I enjoy building them end to end. I am in Singapore and will work on site: review, build, benchmark on your documents, handover with a troubleshooting guide, then a light monthly check-in to keep it current. Hourly, with a clear time log. How many documents, scanned or digital, and how many users? Lars
$125 SGD in 40 days
0.0
0.0

Singapore, Singapore
Payment method verified
Member since Oct 7, 2026
$1500-3000 USD
₹37500-75000 INR
₹600-1500 INR
$250-750 AUD
€1500-3000 EUR
₹12500-37500 INR
$5000-10000 USD
min $50 USD / hour
$750-1500 AUD
$10-30 USD
₹600-1500 INR
₹1250-2500 INR / hour
₹1500-12500 INR
₹1500-12500 INR
$1500-3000 USD
₹1500-12500 INR
$15-25 AUD / hour
€30-250 EUR
$250-750 USD
$8-15 USD / hour