HFSS Microstrip Antenna Simulation

₹1500-12500 INR

Suoritettu

Julkaistu 28 päivää sitten

₹1500-12500 INR

Maksettu toimituksen yhteydessä

I need a complete Ansys HFSS model of a microstrip antenna working in the high-frequency band 140 GHz. My aim is to make array and to analyse radiation pattern, impedance matching and gain exactly as they appear in a research paper I will share after kickoff. Your job is to recreate the antenna geometry from the paper, set up the correct substrate, ports, and boundary conditions, run the solver, and then fine-tune dimensions so the results align with the publication. Acceptance criteria • |S11| ≤ –10 dB at the paper’s centre frequency • Realised gain within ±0.5 dB of the reported value • 2D/3D far-field plots that visually match the paper’s patterns Deliverables 1. Native .hfss project containing geometry, setup, and post-processing 2. PDF summary with screenshots of model, mesh, convergence, S-params and radiation plots 3. CSV exports of S-parameter and far-field data for external processing If you are comfortable optimising microstrip layouts in HFSS and can hit those targets quickly, I look forward to working together.

Arena Simulation Programming

Electrical Engineering

Engineering

Finite Element Analysis

Simulation

Technical Documentation

Projektin tunnus (ID): 40318792

Tietoa projektista

6 ehdotukset

Etäprojekti

Aktiivinen 23 päivää sitten

Haluatko ansaita rahaa?

Sähköpostiosoite

Freelancerin tarjouskilpailun edut

Aseta budjettisi ja aikataulu

Saa maksu työstäsi

Kuvaile ehdotustasi

Rekisteröinti ja töihin tarjoaminen on ilmaista

Myönnetty käyttäjälle:

@roopantuli

I can deliver this — HFSS microstrip patch at 140 GHz, matched to your paper's results. I've designed and simulated microstrip patch antennas in HFSS across multiple projects, including a U-slot patch with ~10 dBi gain and 1.6 GHz bandwidth, and a PIFA dual-band antenna for PCB integration. I also have a published IEEE APS paper on EM simulation, so I understand what it takes to match simulation results to published data — not just get it "close." For your 140 GHz design specifically, here's exactly how I'll work: Once you share the paper, I'll extract the substrate parameters (εr, loss tangent, thickness), recreate the geometry with precise dimensions, set up the waveport with correct de-embedding, define radiation boundaries, and configure the solution frequency and frequency sweep. I'll then iteratively tune dimensions to hit your three acceptance criteria — S11 ≤ −10 dB at center frequency, gain within ±0.5 dB, and visually matching far-field patterns. Deliverables will be exactly as you listed: the .hfss file, PDF summary with mesh/convergence/S-params/radiation screenshots, and CSV exports. Timeline: 5-7 days after you share the paper. My bid: 8,000 I have one question before we start: is the paper targeting a single-element first, or do you want the array modeled directly? I'd recommend validating the single element first, then building the array — this is faster and gives cleaner convergence. Happy to discuss.

₹8 000 INR 7 päivässä

0,0

(0 arvostelut)

0,0

6 freelancerit tarjoavat keskimäärin ₹8 417 INR tätä projektia

@miskinarati

Hi there, I would be happy to assist with HFSS microstrip antenna simulation. With expertise in antenna design and electromagnetic simulation using HFSS, I can deliver accurate and optimized results for your project. Approach: Define antenna specifications (frequency, substrate, feeding method) Create parametric microstrip antenna model in HFSS Apply boundary conditions, excitation, and mesh setup Perform frequency sweep and parametric optimization Analyze S-parameters, VSWR, gain, and radiation patterns Fine-tune design for impedance matching and performance Deliverables: HFSS project file with fully defined model Simulation results (S11, VSWR, radiation pattern, gain) Optimization study (if required) Summary report with design insights Timeline: To be determined after discussing project scope. Budget: Open to negotiation based on complexity. Looking forward to collaborating on this project. Let’s connect to discuss further. Best regards, Arati M.

₹7 000 INR 7 päivässä

5,0

(27 arvostelut)

6,3

@ossamasaleem

Hi, I can design and simulate a 140 GHz microstrip antenna model in Ansys HFSS with accurate substrate definition, port setup, boundary conditions, and full solver configuration. I will optimize the layout to achieve |S11| ≤ –10 dB at the center frequency and match the reported realized gain within ±0.5 dB. You will receive the native HFSS file, detailed PDF report with radiation plots, and CSV exports of S-parameters and far-field data.

₹8 500 INR 5 päivässä

5,0

(6 arvostelut)

4,0

@engrhasan01

I am an Electrical and CAD Design Engineer with 5+ years of experience in high-frequency electronics and RF/microwave design. I can develop a complete HFSS model of your 140 GHz microstrip antenna as presented in your reference paper. I will recreate the antenna geometry, assign the correct substrate, ports, and boundary conditions, and run simulations to match the publication’s results. Dimensions will be fine-tuned to ensure: |S11| ≤ –10 dB at the specified centre frequency Realised gain within ±0.5 dB of the reported value 2D/3D far-field plots visually matching the paper Deliverables include: Native .hfss project with full geometry, setup, and post-processing PDF summary with screenshots of model, mesh, convergence, S-parameters, and radiation plots CSV exports of S-parameters and far-field data With my strong background in HFSS optimisation, microstrip layout design, and array antenna development, I can deliver precise, research-paper-accurate results quickly. I can start immediately and ensure the model aligns exactly with your publication

₹8 500 INR 7 päivässä

4,9

(7 arvostelut)

2,7

@hussainarh

Hello, I hope you are doing well. We have experience in designing antenna from HF Band to Ku, on PCB to all metal high power antenna. I have recently completed an antenna simulation for multi-Ham bands. The antenna simulations also included the effect of different soil conditions on the radiation patterns. Other than that, we extensive work experience in RF domain including developing TR modules, RF circuit components and a good antenna portfolio, some which can be seen in my profile. I am well versed in CST/HFSS simulations, and I think I am a good match for this job. Regards AbdulRahman

₹10 000 INR 10 päivässä

4,6

(1 arvostelu)

2,8

@Mostafaihab1

Hello, I can definitely help you with this project. I have solid professional experience using ANSYS HFSS and CST Studio Suite for high-frequency antenna design and optimization, having recently delivered 2×2 and 4×4 arrays, a 19/38 GHz dual-band microstrip patch, and a fabricated 1-to-4 Wilkinson power divider using ADS. This background makes me highly familiar with high-frequency behavior, impedance matching, and tuning for precise results. After reviewing the paper, I am ready to accurately recreate the 140 GHz GCPW patch geometry and ground via setup, configure the correct substrate and boundary conditions, and fine-tune the dimensions to ensure the S11, realized gain, and radiation patterns strictly align with the publication. I will quickly deliver the clean native HFSS project, a clear PDF summary with the mesh and convergence results, and the CSV data for your further analysis

₹8 500 INR 7 päivässä