Torque game engine jobs

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Taidot
Kielet
    Työn tila
    745 torque game engine työtä löytyi, hinnoittelu EUR

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €20 - €166
    €20 - €166
    0 tarjoukset
    electronic eng Loppunut left

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €20 - €166
    €20 - €166
    0 tarjoukset

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €71 (Avg Bid)
    €71 Keskimäär. tarjous
    2 tarjoukset
    electrical project Loppunut left

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    2 tarjoukset

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €73 (Avg Bid)
    €73 Keskimäär. tarjous
    1 tarjoukset

    Main purpose of the project was to design a machine having less mass and less losses thus different parameters were calculated...and different designs for hub mounted and rim mounted machine were compared keeping in mind how back iron thickness is effecting our mass and how slot shape is effecting our torque using the above mentioned design equations.

    €123 (Avg Bid)
    €123 Keskimäär. tarjous
    3 tarjoukset

    I have two models of generators built in OctaveFemm but now need to calculate and plot results such as cogging torque, 3 phase currents, EMF Vs rotor position followed by getting my rated torque.

    €165 (Avg Bid)
    €165 Keskimäär. tarjous
    18 tarjoukset

    ...of a generator in FEMM using LUA scripting but currently I am getting almost 0 torque for my machine after putting a current density in each of the 3 phases. To meet the specification I need to get my rated torque value followed by optimising the machine in terms of torque and mass by changing variables such as slot depth, tooth width, height of the

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    1 tarjoukset

    Brushless Alternators for Wind and Water Turbines from 200W up to 100KW. High torque-to-weight. Compactness. High efficiency. High accuracy. Reliability.

    €357 (Avg Bid)
    €357 Keskimäär. tarjous
    10 tarjoukset

    Hi! I've been asked to find a Mexican-born, native Spanis...native Spanish speaker to help us translate an entire website (approx. 140,000 words). The topic is a bit technical, dealing with fine motor control, angular position, and torque transmission technology used widely in consumer electronics, automotive, aviation, medical, and other industries.

    €3778 (Avg Bid)
    €3778 Keskimäär. tarjous
    74 tarjoukset

    Make a mockup and convert to wordpress single page website. Color preference White nd Blue. No need logo for now. Just use a text "torque". Page will have banner, Welcome text, What we do section, testimonial and footer with social link.

    €101 (Avg Bid)
    €101 Keskimäär. tarjous
    39 tarjoukset

    We are currently in the process of developing a custom-built VTOL-drone specifically designed (Bi-copter+innovative dedicated torque-reaction propeller for balancing) to harvest fruits from Coconut, Nutmeg and Palm trees. It is decided that commercially available ones are not suitable for the purpose due to their inability to get closer to tree. The

    €315 (Avg Bid)
    €315 Keskimäär. tarjous
    5 tarjoukset

    I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. 1. What motors do you want compared? Give details, PM, IM, SPM

    €110 (Avg Bid)
    €110 Keskimäär. tarjous
    7 tarjoukset

    ...elevator, showing the Earth and a cable slightly lose, extending outward with a spinning wheel at the end that spins at the apogee (semi-major axis of elliptical orbit) to create torque to move inward, with rocket fire shooting outward, to prevent weight at end of cable from being to tight. Also, rocket fire must shoot in the west direction to prevent Kepler

    €300 (Avg Bid)
    €300 Keskimäär. tarjous
    38 tarjoukset

    ...replacement. Nevertheless, due to the difficulty in applying the required torque to remove the nuts, most of the time, driver rely on the tow truck and available nearest mechanic to solve the problem. This always happen to the elderly or female drivers. Based on the capability of torque application by these drivers, a vehicle all-wheel-nuts remover is designed

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    3 tarjoukset

    ...need someone, preferably from India, who can promote https://www.SpaceHose.com. The successful candidate must understand basic physics (centrifugal versus gravity) forces, torque from spinning objects, thrust from H2-O2 rockets as a function of fuel rate, Kepler's laws, and some basic materials engineering, like stress versus strain calculations, free

    €3 / hr (Avg Bid)
    €3 / hr Keskimäär. tarjous
    7 tarjoukset

    We are looking to develop a stepper motor driver board to control 8 stepper motor through RS485 protocol. Each stepper motor will have different Holding Torque.

    €170 (Avg Bid)
    €170 Keskimäär. tarjous
    25 tarjoukset

    I ne...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. My budget is about 50-80$ Upper bids will not be accepted

    €53 (Avg Bid)
    €53 Keskimäär. tarjous
    3 tarjoukset

    I ne...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. My budget is about 50-80$ Upper bids will not be accepted

    €117 (Avg Bid)
    €117 Keskimäär. tarjous
    12 tarjoukset

    I need to compare 2 phases Tesla motor with 3,4,5 phases standar...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    €53 (Avg Bid)
    €53 Keskimäär. tarjous
    4 tarjoukset

    Looking for someone who is expert in this software http://motoran...I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. Characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    €69 (Avg Bid)
    €69 Keskimäär. tarjous
    12 tarjoukset

    I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. Characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report. I need characteristic, electric, mechanic, and other Models of the

    €75 (Avg Bid)
    €75 Keskimäär. tarjous
    12 tarjoukset

    I need to compare 2 phases Tesla motor with 3,4,5 phases standar...need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    €58 (Avg Bid)
    €58 Keskimäär. tarjous
    12 tarjoukset

    I need to compare 2 phases Tesla motor with 3,4,5 phases stan...I need basic operating characteristics. So that compare them. Model of the motors, with the Magnetic field of motor Distribution of magnetic inductions. characteristics of Torque, currents, speed and other if will able summary and comparison that's all. And at finally I need a report.

    €148 (Avg Bid)
    €148 Keskimäär. tarjous
    17 tarjoukset

    ... and V-type gasoline engine , namely , a Chevrolet 5.7 , is experimentally performed in terms of engine speed at laboratory conditions by using of an exhaust gas analyzer and the special software called “NetDyn” and “WinDyn” . The engine test set up includes a dynamometer to determine the engine torque and data a...

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    1 tarjoukset

    I have part of a crane boom that I need a CFD run on using ANSYS Fluid. The goal is to find the torque values acting around a certain point along the boom from a range of windspeed values and angles. For the project I just need someone to do up step-by-step instructions on how to setup the simulation in ANSYS that I can use to model all of the different

    €134 (Avg Bid)
    €134 Keskimäär. tarjous
    33 tarjoukset
    Mobile development Loppunut left

    I need an Android app. I would like it designed and built. I need to build an simple app with bluetooth conection interface, for car scanning data and some ... I would like it designed and built. I need to build an simple app with bluetooth conection interface, for car scanning data and some features, similar to “Carista” and “Torque Pro”.

    €232 (Avg Bid)
    €232 Keskimäär. tarjous
    61 tarjoukset

    Given the specifications and design details, a 3D Solidworks assembly is required

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    24 tarjoukset

    Design a Torque Multiplier of the given specifications in Solidworks

    €149 (Avg Bid)
    €149 Keskimäär. tarjous
    4 tarjoukset

    I am working at a workshop that manufactures CANOPY. We have a customer who wants to work CANOPY and wants to know the torque table for screws for five different umbrellas in length only. the details 1. Glass used 14 mm 2-tubular iron unloaded 10 * 10 thickness 5 mm 3-height 7 meters 4- The structure on the concrete and not the stone 5. We will use

    €155 (Avg Bid)
    €155 Keskimäär. tarjous
    11 tarjoukset
    Control panel Loppunut left

    Controller that control the speed, the torque and reverse rotation for 9v brushless motor

    €136 (Avg Bid)
    €136 Keskimäär. tarjous
    8 tarjoukset

    ...inverse kinematics engine unnecessarily complex. ViSP provides a generic interface for robot manipulators up to 6 DOF, but in this case 5 would suffice. To keep the construction of the arm light and strong, any polycarbonate based material such as Lexan 9034 or PVC Sheet will be used. The choice of servos that provide the necessary torque for needed manipulation

    €400 (Avg Bid)
    €400 Keskimäär. tarjous
    9 tarjoukset

    ...configuring a robotic arm rather then software, sensors, drives and controllers. You will need to do calculations such as: 1. Working out gearing ratios to achieve the desired torque in each axis 2. Working out the optimal length of each axis to achieve the desired payload 3. Calculating the reach of the robot 4. Provide assistance in choosing and sizing

    €170 (Avg Bid)
    €170 Keskimäär. tarjous
    11 tarjoukset

    Designing and testing of a speed reducer which will reduce the speed of the input by different ratios like (10,20,25,30,40...) which will increase the output torque subsequently. For example, if a speed of 1000RPM is applied as input to a 10-Ratio speed reducer, the output speed of the reducer would be 100RPM.

    €99 (Avg Bid)
    €99 Keskimäär. tarjous
    18 tarjoukset

    ...transform into the T logo……the T logo will ride the wave for 1-2 seconds and then should flip and spin in a powerful way to the middle of the screen, and in the dog voice say……Torque Jet Boards Coming soon…… Or we can change the story line to something else, this is just a sample idea. Now you can see the Mongrel dog on the opening of the websi...

    €24 (Avg Bid)
    €24 Keskimäär. tarjous
    8 tarjoukset

    This is a very simple project and we will select the lowest ...rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate the exact holding Torque to ensure that the table stops rotating at precise location. Also, a few more sections to be calculated.

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    2 tarjoukset

    We are developing a machine which has a rotary table with fo...rotary table. Rotary table will be rotating to 45 degrees in 1 sec and will stop in precise 45 degrees. Rotary table will have 8 stops. We need to calculate the exact holding Torque to ensure that the table stops rotating at precise location. Also, a few more sections to be calculated.

    €46 (Avg Bid)
    €46 Keskimäär. tarjous
    30 tarjoukset

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    €626 (Avg Bid)
    €626 Keskimäär. tarjous
    9 tarjoukset

    Provide maximum and minimum torque specifications for hold down bolts and driver compartment screws for cast aluminum streetlight housing. Provide Effective Projection Area (EPA) Calculations for wind load calculations. Submitter shall be qualified to perform structural calculations and certifications for roadway structures. Submittal shall

    €176 (Avg Bid)
    €176 Keskimäär. tarjous
    7 tarjoukset

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    €494 (Avg Bid)
    €494 Keskimäär. tarjous
    12 tarjoukset

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    €427 (Avg Bid)
    €427 Keskimäär. tarjous
    4 tarjoukset

    ...a autos: Usados : Auto Kilometraje Año Precio desde Nuevo :Auto Ficha técnica Moneda ( Moneda ) Precio desde Auto ( abstract ) Motor Potencia Torque Transmisión Tracción Ruedas Cilindrada Cilindros / Valvulas Distancia entre ejes Largo Ancho sin espejos Alto Baul Peso Tanque de combustible Modelo ( sport

    €443 (Avg Bid)
    €443 Keskimäär. tarjous
    26 tarjoukset
    Trophy icon Make a product flyer Loppunut left

    ...part. There are 2 product "classes" within this product category: SUPERFLEX and MEGAFLEX . SUPERFLEX is our High Performance line, MEGAFLEX is for extremely high power and torque applications. We want all our marketing materials to portray that our product is the Rolex of this product type. Please use 8.5" x 11" as a reference for size, as we

    €44 (Avg Bid)
    Taattu
    €44
    15 työtä

    ...with Jiffy Lube's quality performance policy. White area for signature and date. (see sample but don't copy) Check boxes: Oil Level Verified: Oil Cap Verified: Plug Torque Checked: Oil Filter Verified: Air Filter Box Checked: Window Quality Checked: Vacuum Quality Checked: Window Sticker Checked: Bottom area: Make look like a coupon

    €262 (Avg Bid)
    Mainostettu Taattu Huippukilpailu
    €262
    21 työtä

    Simulate timing cam ,air flow ,torque speed,fail and etc

    €381 (Avg Bid)
    €381 Keskimäär. tarjous
    10 tarjoukset

    PCBA - Firmware development for development of a machine. Unit will have Servo motor of high torque (20Nm), sensors.

    €612 (Avg Bid)
    €612 Keskimäär. tarjous
    11 tarjoukset

    ...RPM CONSTANT TORQUE, reversible direction unit. The motor will drive a small lathe via belt/pulley drive (this is NOT part of this job description) . The control box will have a basic functions: a display showing motor speed and CW/CCW direction switch). Your job is to - select DC suitable motor which can provide constant torque - design control

    €675 (Avg Bid)
    €675 Keskimäär. tarjous
    16 tarjoukset

    ...[kirjaudu nähdäksesi URL:n] TEMPERATURE & HUMIDITY SENSOR [kirjaudu nähdäksesi URL:n] SERVO [kirjaudu nähdäksesi URL:n] WATER SENSOR [kirjaudu nähdäksesi URL:n] N. 3 PERISTALTIC PUMPS Your task is to program our 4DUINO

    €175 (Avg Bid)
    Paikallinen
    €175 Keskimäär. tarjous
    2 tarjoukset

    Project scope: For a pers...[kirjaudu nähdäksesi URL:n] TEMPERATURE & HUMIDITY SENSOR [kirjaudu nähdäksesi URL:n] SERVO [kirjaudu nähdäksesi URL:n] WATER SENSOR [kirjaudu nähdäksesi URL:n] N. 3 PERISTALTIC PUMPS

    €223 (Avg Bid)
    €223 Keskimäär. tarjous
    15 tarjoukset