Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    1,712 stm32 primer2 työtä löytyi, hinnoittelu EUR

    I am looking for a freelancer to create a custom PCB with STM32 and TJA CAN Transceiver to convert UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages. The requirements for this project are as follows: - New design from scratch: The client does not have a schematic or design for the PCB and needs a new design from scratch. - Small form factor: The preferred form factor or size for the PCB is small, less than 5x5 cm. - Specific component requirements: The client has specific components in mind for the project. Ideal skills and experience for the job: - Experience in PCB design from scratch. - Strong knowledge of STM32(since libcanard drivers are already available) and TJA CAN Transceiver (or mcp2515 if that's easier) - Familiarity with UART BMS Data and DRO...

    €334 (Avg Bid)
    €334 Keskimäär. tarjous
    10 tarjoukset
    stm32 programming Loppunut left

    I have made a circuit using attached GPIO pin circuit diagram, i want someone to write the code , i have code for a another model of stm32.

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    14 tarjoukset

    ... Embedded Programming and Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer for verification. NOTE! Failure to check our profile will disqua...

    €336 (Avg Bid)
    €336 Keskimäär. tarjous
    51 tarjoukset

    Merhaba Biyosinyallerin kayit etmek icin STM32 ve moduller kullnarak bir proje yapmak istiyorym.

    €176 (Avg Bid)
    €176 Keskimäär. tarjous
    9 tarjoukset

    I am in need of a hardware+PCB designer who is familiar with Altium for a project involving circuit design. The complexity level of the design is moderate. I have specific components and materials that should be used in the design. Skills and experience required: - Proficiency in Altium - Strong knowledge of circuit design - Experience with modera...design. The complexity level of the design is moderate. I have specific components and materials that should be used in the design. Skills and experience required: - Proficiency in Altium - Strong knowledge of circuit design - Experience with moderate complexity level projects - Ability to work with specific components and materials provided by the client - People who has experience with STM32 is preferred(STM32+small LCD disp...

    €272 (Avg Bid)
    €272 Keskimäär. tarjous
    21 tarjoukset

    I am looking for an Electronic Design Engineer with a specific skill set in Hardware Design and Simulation. The ideal candidate should have experience in designing analog circuits and systems. Skills required: - Microprocess :STM32, ESP32, Arduino - Knowledge of circuit design principles and techniques - Familiarity with circuit simulation and analysis tools Experience: - The engineer should have at least 5-10 years of experience in circuit design - Strong understanding of PCB layout and component selection for circuit designs Software/Tools: - Familiarity with industry-standard circuit design tools and software - Proficiency in using simulation and analysis tools for several circuits Note: The specific software knowledge requirement was not mentioned by the client.

    €556 (Avg Bid)
    €556 Keskimäär. tarjous
    54 tarjoukset

    Hello! I am looking for an experienced freelancer to help me with learning STM32 programming. I am currently at an intermediate level with programming, and am interested in learning all aspects of STM32 programming – from basic concepts to specific applications to advanced techniques. I am ready to start the learning process immediately; please contact me if you are qualified to teach me the skills I need. Thanks for your time.

    €108 (Avg Bid)
    €108 Keskimäär. tarjous
    5 tarjoukset

    encoder, 2x16 lcd , stm32 , current sense , voltage sense , 100W (5A) motor control board.

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    11 tarjoukset

    I am looking for a freelancer to help with a project that involves electronic and programming development. Specifically, I am looking for someone to help with full system d...am open to suggestions regarding the specific platform and technology that may work best for this specific project, we think of Nano Pi to communicate with Thermal camera (rs232), we need to make communication and show the pixels on the LCD screen + be able to access that pixels from Nano PI externally via ModBus RS485 (PLC), PCB can be alternatively developed from beggining using for instance STM32 microcontroller. The turnaround time for this project is 1-3 months. Therefore, I am in need of a freelancer who can work efficiently and within the given parameters to ensure that the project is completed in a time...

    €139 (Avg Bid)
    €139 Keskimäär. tarjous
    1 tarjoukset

    stm32 , 48V PMM motor , 3 phases, current limitation and LCD. I need only PCB design.

    €1706 (Avg Bid)
    €1706 Keskimäär. tarjous
    35 tarjoukset

    Step 1 Power up STM32 (STM32 Mini F401 or similar) Step 2 Turn LED A "ON" Step 3 Wait 1min Step 4 Turn LED B "ON" Step 5 Wait 5min Step 6 Turn LED A & B "off" Step 7 Start timer 15min timer Step 8 Enter low power mode/stop till 15 min timer expires Step 9 Wake up (normal power) Step 10 Jump to step 2

    €108 (Avg Bid)
    €108 Keskimäär. tarjous
    36 tarjoukset

    We have a data logging software on windows C# that we use it with arduino normally, AND NOW, we want to use STM32 bluepill(or blackpill) and our software adaptation. Please read carefully below explanation and give your price. Dont waste our time if you dont have stm32 project experiences. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer and see values on our software. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will sh...

    €199 (Avg Bid)
    €199 Keskimäär. tarjous
    20 tarjoukset

    I am in need of experienced C coding services for a project involving an STM32 and GSM module. The code must be written in C and should be optimized to function most efficiently. Also, I need library support for both the STM32 and GSM module in the code. The freelancer for this project should have previous experience in working with STM32 or GSM modules, as well as expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7XXX. I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the SIM card is disconnected and reconnect it again. Please contact me if you have any ...

    €144 (Avg Bid)
    €144 Keskimäär. tarjous
    21 tarjoukset

    i need IOT based or STM32 based data logger. Need to read data from sensors i.e 4-20 mA or 0 - 10 volts or RS-485. and need to upload data to server by using LAN or SIM

    €570 (Avg Bid)
    €570 Keskimäär. tarjous
    13 tarjoukset

    I am the Chief Technology Officer of a medical device company that is looking for help with the development of firmware for our microcontrollers. We are using STM32CubeIDE as our development environment and we need someone with expert knowledge to help develop advanced firmware for our medica...firmware for our microcontrollers. We are using STM32CubeIDE as our development environment and we need someone with expert knowledge to help develop advanced firmware for our medical devices. We have been in business for several years and understand the importance of quality software, which is why we are seeking an experienced freelance firmware developer to help us. If you are proficient in the STM32 platform and have a history of creating advanced firmware, then this may be an ideal projec...

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    22 tarjoukset

    ...model 2. Develop PCB 3. Software development Assumptions 1. The board should have cable inputs to which an MAF sensor (a model commonly used in cars) will be connected. 2. Software for analyzing data from the MAF sensor. 3. The PCB communicates via Modbus Slave protocol, RS485 with a master device, providing information about the air flow/current airspeed. 4. The recommended microcontroller is STM32, and the programming environment can be C/C++/C#. 5. The board should have 4 mounting holes around the edges for designing a separate enclosure, which will be a separate project. 6. The PCB enclosure is not part of this project. 7. The model of the MAF sensor is not specified, but it should be cost-effective. The specific model will be chosen based on cost assessment and the availabi...

    €489 (Avg Bid)
    €489 Keskimäär. tarjous
    45 tarjoukset

    I've simplified my code to its bare essentials, yet I'm still encountering a HardFault_Handler error when trying to erase a single FLASH page. I'm seeking assistance from an experienced STM32 engineer to help diagnose and resolve the issue.

    €33 / hr (Avg Bid)
    €33 / hr Keskimäär. tarjous
    22 tarjoukset

    I am looking for a firmware developer who can review the existing firmware and find some potential issues. The candidate should be familiar with STM32 firmware development. I can provide the schematic and source code to the right candidate. Only apply if you have something to prove your skills. It would be a big plus if you have a public Github profile with the STM32 development history. Please include a word BMI270 in your proposal to be considered.

    €108 (Avg Bid)
    €108 Keskimäär. tarjous
    20 tarjoukset

    I am looking for a freelancer who is familiar with the STM32 F303RE microcontroller and bare metal programming, as I am in need of guidance for my project. Project Requirements: - Develop a program using Keil uVision in thumb2 mode - The program should read and display register values of the STM32 F303RE microcontroller - The displayed register values should be in hexadecimal format Ideal Skills and Experience: - Proficiency in bare metal programming for the STM32 F303RE microcontroller - Experience with Keil uVision and thumb2 mode - Strong understanding of register operations and display formatting in hexadecimal Please provide examples of previous projects or relevant experience in your proposal.

    €66 (Avg Bid)
    €66 Keskimäär. tarjous
    8 tarjoukset

    estoy programando en una STM32 F303RE y necesito un generador de voltaje variable por medio del DAC es decir que de una salida de voltaje dc variable, todo esto en C a nivel de registros o bare metal programming

    €9 - €28
    €9 - €28
    0 tarjoukset

    I am looking for a software developer/electronics and communication engineer to build a custom software for me. The key expertise I would need would be Python, as this would be the programming language used in this project. I am looking to develop a new software, as opposed to building on an existing one. The purpose of this software is to communicate with a micro-controller (STM32). This software must have great precision in communication, as well as a number of other custom features. It should be able to 'talk' to the micro-controller, and send commands and receive information from it. And the device I have made is a gaming controller for which I need a software which communicates with device and game. As such, I am looking for someone with experience in this. I'm a...

    €186 (Avg Bid)
    €186 Keskimäär. tarjous
    14 tarjoukset

    Wir benötigen eine Testsoftware, die die einzelnen Komponenten unserer neu entwickelten PLC auf STM32 Basis auf Funktion prüft. Getestet werden soll: • Speicher (RAM, SD-Karte) • Schnittstellen (Ethernet, RS232, RS485, KNX, CAN) • analoge und digitale Ports Die Software wird in C++ entwickelt. Folgeprojekte sind möglich!

    €62 / hr (Avg Bid)
    €62 / hr Keskimäär. tarjous
    5 tarjoukset
    STM32 GUI LCD Loppunut left

    I am looking for someone to create a GUI LCD for an STM32L431 board. The LCD display will be a TFT LCD (resolution 320x240) and the main function of this GUI will be displaying sensor data (display numeric data and make a histogram ). The GUI must be set to allow user input, provide menu navigation, display real-time sensor data, and store critical data. The system must also be able to handle various errors and be able to return to its original state afterwards. Additionally, the GUI should support professional standard features like fonts, screen orientation, window functions, and color control. This project requires experience working with STM32L4 boards and developing professional User Interfaces (UIs). If you feel qualified for this project, please contact me with your experience and...

    €1035 (Avg Bid)
    €1035 Keskimäär. tarjous
    29 tarjoukset

    I am in need of experienced C coding services for a project involving an STM32 and GSM module. The code must be written in C and should be optimized to function most efficiently. Also, I need library support for both the STM32 and GSM module in the code. The freelancer for this project should have previous experience in working with STM32 or GSM modules, as well as expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7XXX. I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the SIM card is disconnected and reconnect it again. Please contact me if you have any ...

    €69 (Avg Bid)
    €69 Keskimäär. tarjous
    7 tarjoukset

    I have several Mikroe click boards. I am going to design a system which get biomedical data using ECG EEG sensors(which are Mikroe ECG/EEG/PPG boards). Based on boards I have, I need somone who write STM32 codes (using HAL)and help me to implement the project. Additionally, I am interested in having the embedded system provide sensor integration functionalities. As a result, knowledge in communicating with sensors, obtaining data, and storing in SD card. For this project, experience with embedded systems and C++ programming is a must.

    €163 (Avg Bid)
    €163 Keskimäär. tarjous
    25 tarjoukset

    I am looking for a freelancer who can help me with the implementation of CAN BUS control on the NUCLEO F446RE board for the ZLAC 8015D motor driver. Programming Language: C++ , STM32 Cube IDE platform Timeline: I need this project to be completed within a week. Experience Level: I am looking for someone with intermediate experience in CAN BUS control implementation. Skills and Experience: - Strong proficiency in C++ programming language - Experience with CAN BUS control implementation - Familiarity with NUCLEO F446RE board and ZLAC 8015D motor driver would be a plus - Ability to work within a tight deadline and deliver high-quality results

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    3 tarjoukset

    I am looking for an experienced developer to interface STM32L4P5 MCU with usb MSC and FATFs over quadspi interface for NAND flash W25Q128 memory. Currently, we have not stable implementation Skills and experience required: - Strong knowledge and experience with STM32 - Expertise in NAND Flash (W25Q128JV) - Familiarity with FATFs and USB MSC library - Ability to troubleshoot and diagnose performance issues - Experience in implementing performance enhancements and optimizations If you have the skills and experience necessary, please submit your proposal.

    €476 (Avg Bid)
    €476 Keskimäär. tarjous
    21 tarjoukset

    I am looking for a freelancer wh...apparently does not seem to work as I kept getting ERRORS when trying to mount the SD card or do anything with the SD card. I keep getting the same ”ERROR in mounting SD card”. To make sure there was no hardware issues I compiled a DataLogger example from Arduino that uses the SD card with SDIO and that works just fine but in my case I would like to make this work with standard C and using the STM32 Cubeide. This is not a a project for profit but something I am personally trying to use for myself todo some data logging. I am sure if you are knowledgable with the STM32F4 series and the STM32CubeIDE this code should not be a very difficult task. If you are confident in your skills and can meet the timeline, please reach out to discus...

    €96 (Avg Bid)
    €96 Keskimäär. tarjous
    17 tarjoukset

    I am looking for a freelancer to create a custom PCB with STM32 and TJA CAN Transceiver to convert UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages. The requirements for this project are as follows: - New design from scratch: The client does not have a schematic or design for the PCB and needs a new design from scratch. - Small form factor: The preferred form factor or size for the PCB is small, less than 5x5 cm. - Specific component requirements: The client has specific components in mind for the project. Ideal skills and experience for the job: - Experience in PCB design from scratch. - Strong knowledge of STM32(since libcanard drivers are already available) and TJA CAN Transceiver (or mcp2515 if that's easier) - Familiarity with UART BMS Data and DRO...

    €314 (Avg Bid)
    €314 Keskimäär. tarjous
    9 tarjoukset

    I am looking for a freelancer to create a custom PCB with STM32 and TJA CAN Transceiver to convert UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages. The requirements for this project are as follows: - New design from scratch: The client does not have a schematic or design for the PCB and needs a new design from scratch. - Small form factor: The preferred form factor or size for the PCB is small, less than 5x5 cm. - Specific component requirements: The client has specific components in mind for the project. Ideal skills and experience for the job: - Experience in PCB design from scratch. - Strong knowledge of STM32(since libcanard drivers are already available) and TJA CAN Transceiver (or mcp2515 if that's easier) - Familiarity with UART BMS Data and DRO...

    €139 - €418
    €139 - €418
    0 tarjoukset

    to write a C code for EA-DOGMA162 LCD and nucleo-l432kc MCU. the target is to print hello world on the LCD.

    €50 (Avg Bid)
    €50 Keskimäär. tarjous
    1 tarjoukset

    ...MicroController STM32 peripheral device. The application should have the following features: - Communication Protocols: The software should be able to communicate with other devices using various protocols. - Data Logging: The application should be able to log and store data for analysis and troubleshooting purposes. - User Interface: The software should have a user-friendly interface for easy navigation and control. I have a specific microcontroller model in mind and I am looking for someone who has experience with this particular model. (STM32) The expected time frame for this project is more than 2 weeks to ensure thorough testing and debugging of the software. Ideal skills and experience for this job include: - Proficiency in programming microcontrollers, specific...

    €1611 (Avg Bid)
    Salassapitosopimus
    €1611 Keskimäär. tarjous
    24 tarjoukset

    I am looking f...I do not have all details fleshed out yet, I have a rough idea of the features and functionality that I need from the firmware. The project will require building the firmware from scratch. The end-product should be able to drive the device's tasks and control its operation. The right candidate for this project will be experienced in firmware development and have a solid understanding of native STM32 L4 series. They will need to be organised, communicative, and capable of working with me to ensure that the firmware meets my expectations. Time efficiency is essential as timelines should be respected. If you feel that you have the skills and experience, please don't hesitate to get in touch. I'm looking forward to discussing this project further and ho...

    €295 (Avg Bid)
    €295 Keskimäär. tarjous
    12 tarjoukset

    ...with microcontrollers and be familiar with the Arduino platform. Requirements: - Range: The desired range for the baitboat autopilot system is approximately 300 meters. - Microcontroller: The system should be developed using Arduino/STM32. - Functions: In addition to basic autopilot functions, the system should include GPS navigation capabilities. The autopilot system should be able to control the movement of the boat and have the ability to release bait automatically. Skills and Experience: - Proficiency in microcontroller programming, specifically Arduino/STM32. - Experience with GPS navigation integration. - Knowledge of baitboat autopilot systems and their functionalities. - Recording and selecting points on the remote control - Strong problem-solving skills and at...

    €222 (Avg Bid)
    €222 Keskimäär. tarjous
    16 tarjoukset

    Hello, I am looking for a freelancer to help with a project that involves electronic and programming development. Specifically, I am looking for someone to help with full s...am open to suggestions regarding the specific platform and technology that may work best for this specific project, we think of Nano Pi to communicate with Thermal camera (rs232), we need to make communication and show the pixels on the LCD screen + be able to access that pixels from Nano PI externally via ModBus RS485 (PLC), PCB can be alternatively developed from beggining using for instance STM32 microcontroller. The turnaround time for this project is 1-3 months. Therefore, I am in need of a freelancer who can work efficiently and within the given parameters to ensure that the project is completed in a time...

    €1213 (Avg Bid)
    €1213 Keskimäär. tarjous
    58 tarjoukset

    I am looking for a freelancer to help me with a project for starting a new enterprise. The project involves using an STM32 MCU to control 2 stepper motors and have them follow a complex contour. Skills and experience required: - Proficiency in programming STM32 MCUs - Strong understanding of stepper motor control - Experience with complex contour following algorithms - Ability to work under tight deadlines and deliver results - Any experience with use of the STM CORDIC co processor may be very helpful here. If you have the required skills and can complete the project then I look forward to the possibility of working with you. Best regards Luigi

    €26 / hr (Avg Bid)
    €26 / hr Keskimäär. tarjous
    27 tarjoukset

    ...experience and expertise to make this project. The freelancer needs to submit the all design source files including Altium files for Schematic, PCB, BOM list and Source code firmware files. We ll make prototype, so necessary technical support guidance needs to extend by freelancer through virtual mode to complete the prototype testing. The desired microcontroller shall be choosen as TMS / STM32/ PIC family only for switching of the circuit and for oled purpose ESP32 may be used or same PIC will be used. The scope including all electronics design, heat sink design, Fan fixing, cooling arrenging, cassing or chessboard design, Cabinet size, bus bar design to make an aesthetic look of the products. The detailed specification is attached addition to this for reference. I...

    €983 (Avg Bid)
    €983 Keskimäär. tarjous
    3 tarjoukset

    I have a system using a STM32 and need to be able to send a csv file from Realterm to my processor and parse it Deliverables Expectations being communication from Realterm to the PC with correct commenting and seeing on realterm software the response from the STM32 stating it got the file. Here is code zip file link. I have done 90% + already. thanks. [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    5 tarjoukset

    ...manufacturing documentation and contribute to prototype/device development. - Work both independently and collaboratively within a team environment to meet project milestones. - Demonstrate strong problem-solving skills to address technical challenges that may arise during the project. Requirements: - Proficiency in C/C++ programming languages, hardware and software development, embedded systems, and STM32 microcontrollers. - Proficient in AutoCAD and design elements. - Proven experience in sourcing component materials or alternative BOM items, specifically Red, Infrared, & White LEDs. - Established relationships with PCB manufacturing organizations in Asia. - Ability to compile necessary manufacturing documentation and assist in prototype/device development. - Ability to wo...

    €23 / hr (Avg Bid)
    Salassapitosopimus
    €23 / hr Keskimäär. tarjous
    7 tarjoukset
    STM 32 Programing Loppunut left

    I need someone who has experience programming stm32. The data from uart must be logged 24/7 for one to 3 months. Data will be draw on line chart, can be logged to CSV or whatever file. A file need to be save in daily to avoid cut off electricity. Data speed about 1 M bit per second. The board is simple which have 6 inputs, 1 PWM control. The critical is data login. I am learning STM32, too. I was hoping you could teach me how to program this STM32, too ( just for function used in this project). I have much experience in Arduino, but STM32 is different. I need your ethics and patience, and I want to teach. The project needs to be completed within a tight deadline of 1-2 weeks. Start from next week.

    €152 (Avg Bid)
    €152 Keskimäär. tarjous
    23 tarjoukset

    Need to create code ( i will create and connect hardware) for STM32+ethernet based controller that will control musical devices using ethernet (cable connected) and based on websockets and OSC protocol commands. The websockets commands - nee to read from mixer using wireshark. Ned to decode the mixer websocket commands and use it to can controll audio mixers by STM32+ETHERNET board using encoders, buttons lets and so on. Need to can use up to 16 audio channels, each channel need to can controll by encoders: Volume, Panorama, EQ Gain Low.id-Low, Mid-High, High, Freq, Q, HPF, Aux1 send, Aux2 send, Fx1 Send, Fx2 Send, Fx3 Send, Fx4 Send, and few other commands. Using Buttons need to can set each channel to Mute/Unmute, also need to can load/save presets by buttons, and few othe...

    €506 (Avg Bid)
    €506 Keskimäär. tarjous
    14 tarjoukset

    Need to create code ( i will create and connect hardware) for STM32+ethernet based controller that will control musical devices using ethernet (cable connected) and based on websockets and OSC protocol commands. Ned to decode the mixer websocket commands and use it to can controll audio mixers by STM32+ETHERNET board using encoders, buttons lets and so on. Need to can use up to 16 audio channels, each channel need to can controll by encoders: Volume, Panorama, EQ Gain Low.id-Low, Mid-High, High, Freq, Q, HPF, Aux1 send, Aux2 send, Fx1 Send, Fx2 Send, Fx3 Send, Fx4 Send, and few other commands. Using Buttons need to can set each channel to Mute/Unmute, also need to can load/save presets by buttons, and few other features (its all in doc file with specifications) Also need to ...

    €479 (Avg Bid)
    €479 Keskimäär. tarjous
    25 tarjoukset

    Arduino IDE codes must be written for our project, which will be implemented with one of the ESP-32 or STM-32 or nano iot 33 processors using the Arduino OCCP1.6 library. There will be a server connection via Ethernet and Wi-Fi connection. There will be OTA support. Schematics and PCB drawings were made. The charger, which will have a 3-phase 22KW power, will show current, voltage and drawn power values ​​on the screen. Other details will be communicated later.

    €1601 (Avg Bid)
    €1601 Keskimäär. tarjous
    17 tarjoukset

    In the firmware of we have a memory leak, possibly caused somewhere around lines 360 to 376 in file "FOCSS.c" in folder "ECSS-6". This leads to spurious overwrites in the memory. Hence sometimes after about 1..10 Minutes the system / FreeRTOS crashes.

    €153 (Avg Bid)
    €153 Keskimäär. tarjous
    19 tarjoukset
    Stm32 programming Loppunut left

    I am looking for an experienced programmer to help me with a project using an STM32 microcontroller. Specifically, I would like for the programmer to use C programming language for the project and I am asking for the STM32 microcontroller to perform communications. I already have a specific STM32 microcontroller model in mind. The programmer must have experience with the STM32 platform and should be able to quickly understand and design the project. If the programmer has experience with control systems and/or data processing, that would be a great additional bonus. This project is part of a larger goal and an important component within it, so I am looking for a reliable programmer who can complete the project to the highest standards and on time. I am open to d...

    €645 (Avg Bid)
    €645 Keskimäär. tarjous
    54 tarjoukset

    Hi , Considering to low power consumption and high power efficiency I propose: -. use a high power efficiency of the charger controller like bq24560 - .Active diode instead of the passive one -. Latching relay as you mentioned or low power loadswitch -. Low power microcontroller like stm32 or atmega -. Synchronous switching buck converter, _. Etc I can design the board in 4 layers and double side Thank You - Hendra

    €927 (Avg Bid)
    €927 Keskimäär. tarjous
    1 tarjoukset

    PCB design for a scale with a 4G module to send results to WebServer using HTTP Post. Circuit is intended to be powered from battery with a support of solar panel. MCU will STM32 and 4G GSM module will using SIM7000

    €491 (Avg Bid)
    €491 Keskimäär. tarjous
    16 tarjoukset

    ...logging software on windows C#, STM32 and our software adaptation Please read carefully below explanation and give your price. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The project can not be separa...

    €203 (Avg Bid)
    €203 Keskimäär. tarjous
    9 tarjoukset

    ...Program We are looking for an experienced freelancer to design an embedded circuit and develop a microcontroller program for a control system using a PIC/stm32 microcontroller. Skills and Experience Required: - Strong knowledge and experience in embedded circuit design and microcontroller programming, specifically with the PIC microcontroller. - Proficiency in C/C++ programming language. - Experience in developing control systems. - Familiarity with analog input/output functionalities. - Strong problem-solving skills and attention to detail. Project Scope: - Design and develop an embedded circuit for a control system using a PIC/stm32 microcontroller. - Program the microcontroller to perform the desired control system functions. - Implement analog input/output functi...

    €14 / hr (Avg Bid)
    €14 / hr Keskimäär. tarjous
    20 tarjoukset

    ...who has experience with STM32 devices and ESP8266 ESP-01 module. The project involves implementing a Firmware Over The Air (FOTA) update for an STM32 device using the ESP8266 ESP-01 module. Requirements: - Knowledge and experience in firmware development for STM32 devices - Familiarity with ESP8266 ESP-01 module and its integration with STM32 - Proficiency in implementing Firmware Over The Air (FOTA) updates using Wifi - Strong understanding of UART communication protocol The main objective of the project is to improve the performance of the STM32 device through a firmware update over Wifi. The update will involve bug fixes or adding new features to enhancing the device's performance. If you have relevant experience and skills in wifi firmware...

    €312 (Avg Bid)
    €312 Keskimäär. tarjous
    37 tarjoukset