Software create detailed furniture drawings työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    14,007 software create detailed furniture drawings työtä löytyi, hinnoittelu EUR
    Texturing of the furniture models #1 6 päivää left
    VARMENNETTU

    The main goal of this project is: Make textures of the furniture models from laser scanning. For texturing you have to use attached photos. For wooden parts you can use any similar available textures. There will be need to improve models like close holes, little bit of sculpting. List of items in this part: - Table with 8 chairs - set of 2x sofa with

    €173 (Avg Bid)
    €173 Keskimäär. tarjous
    24 tarjoukset

    ...Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be familiar with NFPA

    €232 (Avg Bid)
    €232 Keskimäär. tarjous
    1 tarjoukset

    Task: Get the content done for a 3-page pdf overview for Leap's Security review offering. I have attached the security review proposal which we want to turn into an overview PDF. I have also attached some similar product overviews from other businesses which might help you the layout and flow for the content. I have attached all the other files as well that contain different case studies for...

    €117 (Avg Bid)
    €117 Keskimäär. tarjous
    27 tarjoukset

    I have a list of architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing sheets should be listed ...

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    19 tarjoukset

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    €305 (Avg Bid)
    €305 Keskimäär. tarjous
    6 tarjoukset

    Furniture design - re-styling an existing fixed seat

    €621 (Avg Bid)
    €621 Keskimäär. tarjous
    25 tarjoukset
    2D and 3D Drawings 5 päivää left

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    €355 (Avg Bid)
    €355 Keskimäär. tarjous
    8 tarjoukset

    This is not rendering gig!!! We manufacture and supp...review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full time job. We will be paying per set of drawings. AutoCad and architectural drawings navigational knowledge with 3 years experience must.

    €10 / hr (Avg Bid)
    €10 / hr Keskimäär. tarjous
    36 tarjoukset

    ...freelancer who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in

    €556 (Avg Bid)
    €556 Keskimäär. tarjous
    85 tarjoukset

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    €84 (Avg Bid)
    €84 Keskimäär. tarjous
    26 tarjoukset
    Edit two drawings 5 päivää left

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    €11 (Avg Bid)
    €11 Keskimäär. tarjous
    35 tarjoukset

    ...sofa 2) Long format general furniture 3) Short format High graphic design skill required, as well as Ruby on rails Brief- -Propose graphic concept/layout -Refine curent UI / UZX -oversee page development -migrate products Need Ability to choose modules / fabrics Referece egs. [kirjaudu nähdäksesi URL:n]

    €633 (Avg Bid)
    €633
    4 työtä
    Creating shop drawings 5 päivää left

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    €124 (Avg Bid)
    €124 Keskimäär. tarjous
    68 tarjoukset

    We are seeking a copywriter with an experience writing product descriptions for ecommerce site. Specifically, we need a copywriter to revise/edit all product descriptions on our site. Our online store has over 1,200 skus. Proficiently in Microsoft Excel and Word preferred. I suggest you, if you don't live in North America, please don't apply.

    €101 (Avg Bid)
    €101 Keskimäär. tarjous
    19 tarjoukset

    We are a UK based online e-commerce store supplying vintage home furniture. We are looking for a Facebook Ads expert that has proven to deliver results and able to provide valuable support to best optimise a conversion funnel. We are ideally looking for a professional company or a specialist that has a proven track record of results (not promise results)

    €182 (Avg Bid)
    €182 Keskimäär. tarjous
    10 tarjoukset

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    €137 (Avg Bid)
    €137 Keskimäär. tarjous
    18 tarjoukset

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    €144 (Avg Bid)
    €144 Keskimäär. tarjous
    19 tarjoukset

    Hello Everyone! We need a new logo for our brand - Operand... We need a new logo for our brand - Operando. Operando make a industrial office furniture & equipment (coffee table, shelves, etc.). Requirements: -vertical and horizontal logos -thin font -additional profile graphics for facebook. The graphics will refer to furniture and office equipment.

    €44 (Avg Bid)
    Taattu
    €44
    82 työtä

    We are polish, small company, produsing upholstery. Our brand is ower 10 years on a market. Our prduc...brand is ower 10 years on a market. Our prducts are high quolity, up to date design, cosy and ergonomic. Most of our collections are modular. We looking for designers who create some new products for us. Enclosed three pictures of our collections

    €334 (Avg Bid)
    €334 Keskimäär. tarjous
    9 tarjoukset
    CAD Drawings (House Elevations) 4 päivää left
    VARMENNETTU

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    40 tarjoukset
    Construction Drawings 4 päivää left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    39 tarjoukset
    patent drawings 4 päivää left
    VARMENNETTU

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    €123 (Avg Bid)
    €123 Keskimäär. tarjous
    15 tarjoukset
    AutoCad drawings 4 päivää left

    ...about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also. Ultimately I want to create accurate 2D plans of the other 2 Pyramids

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    62 tarjoukset

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    €7 / hr (Avg Bid)
    €7 / hr Keskimäär. tarjous
    24 tarjoukset

    I am going to send you pictures with details of how I want the website to be like. I have five furniture houses in different countries and I want each of them to be on the website all existing independently with payment options and a blog

    €640 (Avg Bid)
    €640 Keskimäär. tarjous
    27 tarjoukset
    Contsruction Drawings 3 päivää left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    €283 (Avg Bid)
    €283 Keskimäär. tarjous
    54 tarjoukset
    CAD drawings 3 päivää left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    11 tarjoukset
    Trophy icon CAD drawings 3 päivää left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    €56 (Avg Bid)
    €56
    12 työtä

    I am working on developing a website for a client and I need to have to whole journey of visitors to the website very clear and exact. I would like to find someone who could help me with the project.

    €101 (Avg Bid)
    €101 Keskimäär. tarjous
    15 tarjoukset

    My business partners and I started a custom furniture/decor business. The website has been developed and we are in the process of adding all of the pieces to the website and a number of other websites. We need product descriptions that written that draw the consumer in and describe the quality of the craftsmanship. The successful descriptions would

    €253 (Avg Bid)
    €253 Keskimäär. tarjous
    31 tarjoukset

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    €27 (Avg Bid)
    €27 Keskimäär. tarjous
    28 tarjoukset

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    €128 (Avg Bid)
    €128 Keskimäär. tarjous
    62 tarjoukset

    We are a Electrical Control Panel Manufacturer in Noida. We design, manufacture and commission ACDB, PLC panels. We have been in business since 2014. We are a professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years....

    €18 (Avg Bid)
    Paikallinen
    €18 Keskimäär. tarjous
    3 tarjoukset
    3D component drawings 3 päivää left

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    €243 (Avg Bid)
    €243 Keskimäär. tarjous
    103 tarjoukset

    We are in online furniture selling, want to build a mobile app

    €259 (Avg Bid)
    €259 Keskimäär. tarjous
    25 tarjoukset

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    €34 (Avg Bid)
    €34 Keskimäär. tarjous
    37 tarjoukset

    I have a request to verify t...as low as possible:). I will be getting these every now and then, so will consider you who will help me in this task. - Study the AWR reports of RAC Database. - Provide a detailed analysis of the identified spikes. - Provide solutions/fixes and corrective actions to fix performance problems and enhance the performance.

    €31 (Avg Bid)
    €31 Keskimäär. tarjous
    7 tarjoukset
    Trophy icon Logo Designing for Furniture Store 1 päivä left

    *Business Name - Complete Furniture* This is a UK based High Street furniture store who sell Sofa's, Bed's, Wardrobes, Tables, Chairs. Minimal, Modern and Clean looking Logo needed for the shop front and Website. [kirjaudu nähdäksesi URL:n]

    €79 (Avg Bid)
    €79
    124 työtä

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    €4673 (Avg Bid)
    €4673 Keskimäär. tarjous
    33 tarjoukset
    cartoonised drawings 1 päivä left

    Need 8-10 still image drawings if cartoonised characters. The drawing needs to be done in adobe illustrator and file provided in .svg format. Similar to this in the video attached. [kirjaudu nähdäksesi URL:n]

    €122 (Avg Bid)
    €122 Keskimäär. tarjous
    22 tarjoukset

    Modeling of 3S Max furniture I would like to provide pictures. Please build a model through 3Ds Max based on pictures and specifications.

    €54 (Avg Bid)
    €54 Keskimäär. tarjous
    46 tarjoukset

    PLEASE: Read carefully & fully We are looking for an experienced, detailed oriented product or project manager to help define the requirements for SaaS application. This individual must have excellent communication skills. Our desired SaaS application is based on a combination of existing services / websites. We will provide the specific websites

    €110 (Avg Bid)
    €110 Keskimäär. tarjous
    3 tarjoukset

    Installing a boiler - feed tank - blow-down tank - water softener with heat exchangers (steam shell , water tube) to act as a split system to provide hot water to 30 wash stations for CIP and two different temperature zones (120 degree x 29 zones and 170 degree 1 zone)

    €317 (Avg Bid)
    €317 Keskimäär. tarjous
    34 tarjoukset
    Logo Design for Furniture Website 17 tuntia left
    VARMENNETTU

    I need a Logo designing for a furniture retail store named 'Complete Furniture'. They sell Sofa's , Furniture, Beds and Tables. Logo for this website and Business cards. [kirjaudu nähdäksesi URL:n]

    €75 (Avg Bid)
    €75 Keskimäär. tarjous
    124 tarjoukset
    Need acad drawings 17 tuntia left

    I need Autocad designs copied from a PDF.

    €39 (Avg Bid)
    €39 Keskimäär. tarjous
    16 tarjoukset

    Have 2d drawing of a machine with 26 parts. I require a 3d model with assembly and motion simulation using catia kinematics

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    49 tarjoukset

    Seeking animated artist to assist in project.

    €152 (Avg Bid)
    €152 Keskimäär. tarjous
    9 tarjoukset

    Shopify App development (capable to apply on univertial themes) customize the 'add to cart' button according to our inventory database - When a visitor is checking the product page, the app need to make an api call to our inventory database sending the visitor's ip address and user agent. Our inventor database will return the product quality in stock at that specific location(based...

    €30 / hr (Avg Bid)
    €30 / hr Keskimäär. tarjous
    22 tarjoukset

    I have a lot of old doll patterns from magazines. I would like to find someone who can reproduce the pictures in a larger size and clearer than they are. They do not have to be exactly the same as the pictures. My interest is in the clothing. If you can finish adding the legs that would be a plus. PLEASE DO NOT BID BEFORE LOOKING AT THE SAMPLES. There are 45 pictures in a batch and I will ha...

    €113 (Avg Bid)
    €113 Keskimäär. tarjous
    31 tarjoukset