Snmp project työt

A C or C++ source code example to use Net-SNMP () on a Linux embedded system. The example must allow 1) to receive and answer to SNMP request regarding the status of I/O 2) to send SNMP trap on input change. The example must allow to set 1 output, to read 1 input and to read a 1-wire temperature sensor. I need instruction to configure the board, list of libraries, drivers, etc. to install and how. ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law. Employer will receive exclusive and complete copyrights to all work purchased. (No 3rd party components unless all copyright ramifications are explained AND AGREED TO by the employer on the site per the worker's Worker Legal Agreement). ## Platform The...

I want SNMP (Simple Network Protocol) project to be done.

...must be three applications or discussed prior to project start. Applications may not be scripts, they must be compiled applications. An installer is required. Multiple sets of application 1+2 running on a client must be able to report information to application 3 running as a server. Data collected must be on a per minute basis, data collection must not create any form of meaningful system load, applications must not call external apps. Application details: 1. Application to collect and record WMI data - this needs to run as a system service. Must be extendable to add further WMI data sources in the future. Must be extendable to add checks from other data sources later - I.E. adding new subroutines to pull data from SNMP, command lines, or other...

...printed or sent by email. Maintenance: Ability to easily install patches, updates and upgrades. GUI should have option to backup database. Licensing: Program will need to require a licensing mechanism for installation. License should be single use. Monitoring: Secondary consideration would be to have program proactively warn about data capacity and/or integrity issues. Possible interface into SNMP could be considered....

Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.

Please see attached for details of this project. Please provide quote for POC - I think is pretty easy as I can do most of this in Excel. After POC it will be expanded to handle source IP, destination IP, AND Port. It will then condense multiple entries into a few entries. Phase 2 is Given a set of route tables, and SRC and DST IP addrs, return names of path taken. Route tables can be uploaded using txt, csv, copy/paste, AND SNMP polling. Phase 3 is A GUI version of " return names of path taken" from Phase 2. + Adjust path taken, and thus the changes required to take this new path Generate network map by looking at routing tables AND also by pasting Visio diagrams - this would be very very cool. User specifies preferred optimal path, app t...

I'd like to get a MikroC Pro TCP/IP Stack Implementation for the PIC18 series, very similar to the library provided by Microchip. The library must support the same protocols (TCP,UDP,ARP, IP, ICMP, UDP, TCP, DHCP, SNMP, HTTP, FTP, TFTP,SSL)as the Microchip library and work with MikroC v3.80 and up. I need full source code and API documentation.

I'd like to get a MikroC Pro TCP/IP Stack Implementation for the PIC18 series, very similar to the library provided by Microchip. The library must support the same protocols (TCP,UDP,ARP, IP, ICMP, UDP, TCP, DHCP, SNMP, HTTP, FTP, TFTP,SSL)as the Microchip library and work with MikroC v3.80 and up. I need full source code and API documentation.

We need an SNMP library that can be called from a Flex Application. We cannot use remoting / BlazeDS, because the SNMP call needs to be made from the client. ## Deliverables This library must be self-contained. We cannot install anything on the machine other than the Flash application. Remoting will not work b/c the client needs to make the connection to the local machine to query using SNMP. This library must support SNMPv1,v2. SNMPv3 is a plus but it is not a requirement for this project. You will probably have to use the Flex socket library to create the library (unless you know of a better way - we are open to suggestions!!!)

...production equipment • Scripting, automation and troubleshooting of processes and systems • Design, configure and report on server and systems monitoring, backups, and utilization • Perform system monitoring for load, availability, and capacity • Perform regular security monitoring • Diagnose and troubleshoot system failures in a speedy manner • Production deployment experience with TCP, NTP, SNMP, SMTP, ARP, HTTP, BIND, SSH, SSL using Redhat Enterprise • Maintain and support existing applications • Perform regularly performance tuning • Develop automated approaches for system administration tasks • Apply upgrades and patches to software, storage and processor capacity as necessary Requirements: • ...

Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.

Our project requires the periodic polling of a list of managed network switches via SNMP. Given a list of switches, the application should query each switch (asynchronously, if possible), retrieving a list of each MAC address connected to each port on the switch. It will then return the complete list of each switch port with each MAC. The C# interface I envision looks something like this: IEnumerable<SwitchPollResult> PollSwitches (IEnumerable<Switch> switches); A SwitchPollResult will consist of a list of switch ports, each containing a list of 0 or more MACs. A null value would indicate the port couldn't be reached. My preference is to do this in 100% managed code, using C# and .NET 4. There is an open source SNMP project call...

Our project requires the periodic polling of a list of managed network switches via SNMP. Given a list of switches, the application should query each switch (asynchronously, if possible), retrieving a list of each MAC address connected to each port on the switch. It will then return the complete list of each switch port with each MAC. The C# interface I envision looks something like this: IEnumerable<SwitchPollResult> PollSwitches (IEnumerable<Switch> switches); A SwitchPollResult will consist of a list of switch ports, each containing a list of 0 or more MACs. A null value would indicate the port couldn't be reached. My preference is to do this in 100% managed code, using C# and .NET 4. There is an open source SNMP project call...

...of the discovery scan to a network range as entered by the user in the XML file. You can assume that will be in the same folder as the . Network discovery portion This purpose of this routine will be to use a variety of techniques to scan a network range and detect as many devices as possible that respond to one or more of the various probes such as ping, snmp get, wmi, arp, FTP, TELNET, SMTP, HTTP, POP3 etc. The scan is limited to the range found in the file. The discovery routine will create (or update on subsequent executions) a MS sql table (NetDevices) of all devices that were discovered including their ip address, mac address, and other discovered data. (See database columns later in this document). The discovery routine must

...script and/or template designed to run via Cacti that allows us to set thresholds using values calculated via the Bytes/s + total bandwidth template included. The ultimate goal is to be able to send an alert to a specific email address when the combine total traffic_in and traffic_out for a given interface goes over a threshold we can set on an individual basis. The interfaces are being polled via snmp on a 1min interval with a 1mon rrd refresh time. Interfaces will all have unique names to limit confusion. The script needs to be able to handle a discovery refresh as the name/quantity of interface on a given host may change over time. ## Deliverables I expect that there will be data and threshold templates for cacti provided. If required for calculation, additional scripts ma...

...application installations, configurations, and day-to-day administration. 4. Troubleshoot hardware and software issues as they arise. 5. Work with Apache and IIS6 on a daily basis to support customers and ensure maximum uptime. 6. Staying familiar with new versions of applications used on servers. 7. Working with and troubleshooting all of the following, including, but not limited to: SMTP, SNMP, SNTP, POP, FTP, SSL, SSH, HTTP, HTTPS, telnet, SFTP, DNS, RDP, TCP, ICMP, and UDP. 8. Use knowledge of each of the above listed technologies as related to the issue at hand. 9. Use and maintain zone file for name servers. 10. Work with basic applications and their ports: backup, MSSQL, MySQL. 11. Work with permissions in Microsoft Server 2003. 12. Setup and maintain Open Databas...

...management software? that inventories network equipment, such as network printers and routers, and allows you to manage them by using the SNMP protocol, to manage network computers especially remotely, to generate IT inventory reports for full picture of the? network computers,servers and device configuration.? ## Deliverables requirements notice: As originally posted, this bid request does not have complete details. Should a dispute arise and this project go into arbitration "as is", the contract's vagueness might cause it to be interpreted against you, even though you were acting in good-faith. So for your protection, if you are interested in this project, please work-out and document the requirements onsite. 1) All deliverables will be c...

We are looking to engage a proven cutting edge code writer on a contractual basis to provide a turnkey solution for a monitoring system for a Broadcast Production center. This involves knowledge of SNMP, MySQL (or similar db), custom MIB integration/creation, UI design and other elements that may be needed to arrive at the finished product. The end result we are looking for is a fully integrated system utilizing open-source web-based technologies and providing an ?€œat a glance?€ web interface for real-time systems monitoring purposes. Full documentation as well as training for our personnel would be required. Travel would not be development, installation, configuration and training could be done via web or telephony. ## Deliverables See attached .zip file

Hello, We have MRTG working on Windows and we are looking for someone who can assist us in setting up UDP monitoring on one of our switches. If anyone can help please let me know. Thanks Dave Geoghegan

We require a Schematic Design and PCB layout for an STM32 based Ethernet Switch Module. Potentially we would also be interested in embedded code development for this device. The circuit blocks consist of STM32 F107 a Micrel or other 3 port ethernet switch chip, a precision A to D chip...chip (TBA) plus Phoenix conectors, Power Integrations or other direct offline Switch Mode Power Supply, 2 PHY circuits and connectors. We require Schematic Capture and circuit design from block diagram level and double sided 6 to 8 layer PCB layout approx size 70mm by 55mm. Optional Embedded code development for Interniche IP Stack, web server, ethernet switch management on telnet / CLI / web / SNMP etc. Web based programmable datalogger application, approx code budget 256K inc Stack. We are...

Zlecę napisanie aplikacji pod Linuksa (język obojętny), która będzie monitorować stan moich serwerów (ping, dostępność, usługi czy działają itp.). Musi posiadać łatwy sposób dodawania kolejnych serwerów i usług. Monitorowanie może odbywać się po snmp, może być też rozwiązane w inny sposób. Aplikacja nie musi mieć graficznego interfejsu, musi jedynie powiadamiać użytkownika (mnie) o wszelkich awariach via SMS a raz dziennie wygenerować raport z użycia serwerów (transfer, ilość wejść na stronę, ilość logowań, ilośc wysłanych maili itp.) i wysyłać ten raport na mój email. Słowem - potrzebuję narzedzia do monitorowania serwerów. Nie interesują mnie gotowe rozwiązania jak cacti itp.

Do napisania jest program który działa na serwerze (system win xp). Aplikacja ma zbierać p ruchu na switchu tzn na którym porcie switcha jest ruch, jaki jest adres MAC powiązany z tym ruchem, kiedy to nastąpiło i jaka była prędkość tego. Te informacje należy wrzucić do bazy danych. Termin 10 maj. więcej informacji gg 19521134 (od 8 do 16) lub 1347431 w pozostałych godzinach lub na maila doradztwo@ Proszę o wycenę.

Interesuje mnie napisanie prostego programu do analizy ruchu sieciowego w oparciu o model wieloagentowy W programie moze byc wykorzystany protokol SNMP ale musialyby byc zastosowane programy instalowane na poszczegolnych maszynach klienckich ktore beda pobieraly te dane i wysylaly do serwera centralnego. Program na serwerze musialby analizowac ruch sieci lokalnej i za pomoca algorytmu Forda-Felkursona (lub jakiegos innego) wyznaczac najkrotsza droge dla danej maszyny jesli ta wykazuje czesty ruch w danym kierunku. Generalnie chodzi o to zeby ulatwic modyfikacje tablicy routingu adminowi sieci. Jezeli chodzi o to dla jakich systemow maja byc agenty to chcialbym i Windows i Unix. Jesli potrzebne bedzie wiecej szczegolow to oczywiscie udziele.

Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.

Model a generic router through a MIB definition using SNMP SMIv2 (RFC 1213). Simple definition, containing just two tables of MIB objects (router fan on/off and 1 interface card), it should compile in MG-Soft MIB compiler. The MIB definition should be well commented. ## Deliverables Brief description of the router. And provide assistance in compiling the MIB definition.

Vb.net snmp printer toner status. Function should receive an ip address as parameter and a community string (public). Function should return a collection of toner information (if the device is a printer) Function should also return the printer status (paper jam, out of paper, ...) Library to use : Class toner information should contain: toner name, color,total toner capacity,toner status,toner used. For the colors use a new set of constants to uniquely define the colors. Example: Black = 1 Green = 2 ... Function should work on the major printer brands (with the possibility to extend the function later for other vendors)

*** PROJECT INFO *** I have a JAVA project that needs to be completed and looking for expertise to clean up new developer code and complete the project. Project approx. 80% complete and need to finish last bit. Uses SWING & SNMP4J libraries to capture SNMP log information from Linksys routers capable of SNMP logging. System shows logged events real-time scrolling in the application. *** NEEDS *** 1. Enhance GUI to display output in a grid with titles vs just scrolling in a listbox. 2. Add configuration screens to store local settings. a. Log directory name (Text Field) b. File Prefix (Text Field) c. Upload Server name (Dropdown listbox with server name and “non”) d. Upload Server credentials...

I require a sniffer that can sniff multiple interfaces for Modbus traffic (<http://en.wikipedia....XML file with the fields and values of the IP, TCP and Modbus fields. The sniffer will be configured by SNMP to indicate which interfaces should be recorded, where to save the files and whether to be run or not. The application needs to run on Ubuntu 9.10 Desktop edition, and provided with a full Eclipse project to allow further debugging and development. **Note that you MUST read the specs in the attached zip file to understand the full scope of the project. Do not send a bid prior to reading and understanding it. I invested a lot of time and effort to make the specs as clear as possible.** ## Deliverables Remember to read the full specs attached as a zip fi...

This is a simple java program for SNMP AdvenNet.I will will the PDF to the winner bidder which gives more accurate info. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software installation package that will install the software in ready-to-run condition on the ...

Interesuje mnie napisanie prostego programu do analizy ruchu sieciowego w oparciu o model wieloagentowy W programie moze byc wykorzystany protokol SNMP ale musialyby byc zastosowane programy instalowane na poszczegolnych maszynach klienckich ktore beda pobieraly te dane i wysylaly do serwera centralnego. Program na serwerze musialby analizowac ruch sieci lokalnej i za pomoca algorytmu Forda-Felkursona (lub jakiegos innego) wyznaczac najkrotsza droge dla danej maszyny jesli ta wykazuje czesty ruch w danym kierunku. Generalnie chodzi o to zeby ulatwic modyfikacje tablicy routingu adminowi sieci. Jezeli chodzi o to dla jakich systemow maja byc agenty to chcialbym i Windows i Unix. Jesli potrzebne bedzie wiecej szczegolow to oczywiscie udziele.

...graphs on the Logitech G15Keyboard (http://www.logitech.com/index.cfm/434/3498&hub=1&cl=us,en). The graph would represent the in bytes/sec and out bytes/sec from an SNMP OID (i.e. router interface) similar to a simple MRTG graph (). The xxis should be labeled so I have some idea of what the current traffic rate is. Both graphs should be displayed at the same time. Side by side or top and bottom. Existing code samples for G15 can be found at The program should use a plain text configuration file that contains the OID, IP address, SNMP community name, a text label for the interface that willd display on the LCD screen, the refresh interval in seconds, and the maximum bytes/sec. I'm looking for something

We are after an energy monitoring device. We need to measure a maximum of 32 amps @ 230volts passively using a current transformer. It needs to have multiple channel support, i.e. measuring 48 branch circuits in a distribution board. We are open to offers re design / programming / production. Initially we are after a ...230volts passively using a current transformer. It needs to have multiple channel support, i.e. measuring 48 branch circuits in a distribution board. We are open to offers re design / programming / production. Initially we are after a system that will measure unto 48 circuits. This can be made up of 6 x 8way boards if needed. The output needs to be able to be queried via a HTTP get process or SNMP get request. The voltage will be regulated by a UPS system @ ...

Hello Bidders, BACKGROUND ========== We have created a very simple SNMP trap listner on a CENTOS5 platform. This listner sits on a network and receives traps from many servers etc. on the network. It receives the following 6 traps from these servers and the IP address of the server which generated the trap: authenticationFailure 1.3.6.1.6.3.1.1.5.5 coldStart 1.3.6.1.6.3.1.1.5.1 linkDown 1.3.6.1.6.3.1.1.5.3 linkUp 1.3.6.1.6.3.1.1.5.4 warmStart 1.3.6.1.6.3.1.1.5.2 CPU utilization We consolidate these traps and now want to send an alert or trap to HP Openview. The HP OV will get the trap details and the IP address of our listner as the trap sender. The idea is that instead of putting all the many servers in HPOV, we use the trap listner that we developed, to rece...

...able to send an SNMP SET command to another device on the network. To be clear, this must be 100% lua code. I am unable to include any libraries. I realize there is a LUA SNMP library on lua forge, but I have no way of installing this on the device. The code must be written 100% in lua. It should accept text strings for the fields listed below, generate the SNMP packet (with all of the correct lengths and checksums) then open UDP socket to port 161 of the specified ip and send the packet. With your code I should be able to easily do something like this: snmpset(ip, community, controlmib, setvalue(int)); example: snmpset("10.1.0.80", "public", "1.3.6.1.4.1.320.1.1.12.2.2.1.1.4.2", 3) Some helpful links to get you star...

We are looking for an application that allows a person to visually see their firewall SNMP stats in a Windows application. Deliverables: 1) Windows app, vista widget and google widget that displays the firewalls statistics. 2) Statistics include CPU usage %, memory usage %, and TCP session % in use. Visually displayed as realtime gauges. 3) Display firewall's firmware version. 4) Visual history bar graph of statistics over last 24 hours. 5) Visual history bar graph of statistics over last 24 hours. 6) Tool must use our company logo in design. 7) Area near bottom should query a website page to display promotional information once every 8 hours. 8) App must be able to minimize to to lower-right tray. 9) Design must be attractive / cool. Our target audience is n...

We are a WISP (Wireless Internet Service Provider). We provide a metered internet service, and collect data via SNMP using an open source tool called Cacti. Cacti stores traffic information for each subscriber and stores this data into a round robin data base (RRD files). We want to provide a web-based application to allow any of our subscribers to see (1) Month to date data usage, and (2) Historical data usage, (3) Calculation of bandwidth surcharges if applicable. Other users' data should not be available. We already run a Cacti plugin (called Reportit) that runs a daily report, and saves the report in a CSV file. Unfortunately, the server that collects the data and stores the CSV report is behind a firewall, and is not accessible from the network. This is a Ce...

I need someone familiar with Ubuntu, Linux, SNMP, and Apache to install SNMP and configure it on our web server. The version of Ubuntu we are using is 7.1 and I will need the following components installed and configured to check for hardware status, banswidth usage, uptime, etc. 1. Net-SNMP 2. Mod-Apache-SNMP

The original pfflowd can be found here: I need two changes made to pfflowd: 1) Add support for exporting in netflow v9 format as described here: 2) if_index_in and if_index_out must be correctly populated in all netflow export routines. I would think that running a SNMP query on localhost could allow you to capture the information needed to make this work. Some netflow collectors need these two fields to be correctly populated, otherwise they will discard the packets (i.e. Solarwinds Orion NPM with the NTA add-on module). ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2)Once verified working, source

I have nagios running on a server of mine, I need to change 2 things. - Change the SNMP timeout, so things wait longer before giving up. - Setup the alerting escalations (email bob after 5 minutes of being down, email bob and steve after 10 minutes) This is super easy, I need it done ASAP.

We are setting up a PHP page that will execute several getsnmp commands. Specially, we are wanting to execute SonicWALL OIDs to SonicWALL firewall devices. I have attached the manufacturer provided files. Deliverables for this project: Show us how to add the MIB files so that we can execute commands such as: snmpget(some_ip_address, "public", "sonicCurrentCPUUtil"); where as sonicCurrentCPUUtil is one of many unique SNMP queries. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverables intended to only ever ...

Hi Coders! I need a vb.net project that can query a SNMP device after it's ip address is provided to the app. It should list the available prperties that can be retrieved, and be able to retrieve them when the user requests it. I'm not interested in a nice GUI, just the functionality as this will be ported into an existing application. If possible i would like this to use no 3rd party componants so the project is completely self contained. Thanks Tom

I have 3 sites running OpenBSD connected by openvpn. Owner wants SNMP implemented. SSH access provided. To follow through configuration, testing, feedback, amendment and handing over. Per hour rate or lump sum welcome.

I have a small C program that is compiled in? Linux? that send an SNMP request to a host. I would like to change the SNMP and send a sip packet instead. and parse? the? results. Thats it. A? knowledge of C and sockets is? required. IT is already created so this will require minimum? recreation? of code.? ## Deliverables I want to software to send the sip packet just like the script doe sand get a response just like the script does just parse the results? differently. A way to choose what the outgoing packet will be would be most helpful.

We have 6 WANROUTERS (see ) that use snmp. The company has told us that MRTG is what they recommend for gathering data from the routers. We are looking for someone that can setup MRTG and compile the information from the routers. We are looking for graphs and information by ip address - we want to find out who how much bandwidth and what type of traffic they are using (p2p, http, etc). We would like this to be realtime as well as cumulative totals.

Install Cacti on Linux based machine

Hello Bidders, For a simple programming project, we need urgent help from someone who knows SNMP and PHP and its inner workings well. We have a very simple PHP application that takes SNMP traps and simply lists them in a queue. This application has been developed in PHP on a CENTOS 5.3 server. We need to test and demo this application. What is needed is the following: Part 1: ======= A PHP script that can generate traps on-demand for a Cisco router (since we do not have a cisco router to physically generate traps). The trap should be for the following 2 events: 1. Router up/down 2. Threshold exceed on interface errors the trap should send some fictitious OID information to a particular IP Address that will be the IP Address of our server. We ne...

I need a script that will install SNMP on all XP computers in domain. option1: the dfault path for the windows installation in the registry will have to chage [should be able to acomplish this with or other tool] an answer file needs to be created. option2: i may place needed file on network share and script will have to point to the share and install, answer file still needed. option3: whatever you want :) best result is to install & start this without a restart.

For you Windows Scripting Host gurus: I am using the following WSH script to change SNMP setting on a list of TCP/IP ports: - - - - - - - - - - - - - - - Set objWMIService = GetObject("winmgmts:") Set objNewPort = _ ("Win32_TCPIPPrinterPort").SpawnInstance_ = "IP_" = 1 = "" = "9999" = False objNewPort.Put_ - - - - - - - - - - - - - - - I need this script adjusted to pull from a text file of IP's. For instance: = "" would use a variable instead of a single IP to pull IP's from the text file (one IP per line) and execute the script for the entire list. Note that it would also need

Project requirements Build an ISAPI filter that will work with IIS on 2000, 2003, 2008 server. There are two components of this project: The ISAPI Filter A control application/service that will get data from MS perfmon and SNMP ## Deliverables Control application ??" Can run as a service The control application will allow you to enter a server by Hostname, IPaddress or simply local host You can then select monitoring method ??" DROPDOWN option1?Perfmon/remoteperfmon or option2?SNMP. When using SNMP it will try and use an appropriate MIB bases on the OS, if it can’t find one then it will allow you to select one from another dropdown. The dropdown will list the files names of a directory. A user can copy their own MIB to this file and sel...

Vb.net snmp printer toner status. Function should receive an ip address as parameter and a community string (public). Function should return a collection of toner information (if the device is a printer) Function should also return the printer status (paper jam, out of paper, ...) Library to use : Class toner information should contain: toner name, color,total toner capacity,toner status,toner used. For the colors use a new set of constants to uniquely define the colors. Example: Black = 1 Green = 2 ... Function should work on the major printer brands (with the possibility to extend the function later for other vendors)