Ryu controller työt
I need a PLC-based solution that will take over the quality-control stage of my manufacturing process. The goal is to move from manual checks to a fully automated, repeatable system that flags defects in real time and logs production data for traceability. Here’s what I expect: ...pass/fail logic, reject gate actuation, and data capture. • Electrical and mechanical integration drawings so my in-house team can wire and mount everything exactly as intended. • A concise commissioning guide plus the source program, so future tweaks are straightforward. During hand-off I’ll validate the installation by running a short production batch; the deliverable is accepted once the controller reliably detects defects, actuates the reject mechanism, and logs each event w...
We're looking for an experienced accountant or financial controller to support a portfolio of international technology and ecosystem ventures. This is a flexible, ongoing engagement — open to independent professionals and agencies — with the potential to grow into a fractional CFO role. ABOUT US We operate multiple ventures across ecosystem infrastructure (B2B SaaS), e-commerce, technology solutions, and startup ecosystem coordination. Our activities span Europe and North America, and we work closely with accelerators, innovation hubs, and tech startups globally. We manage multiple legal entities across jurisdictions, including Dutch BVs and potential US structures. WHAT WE NEED We need someone who can handle the full financial picture across our ventures. Here�...
Project Overview We are developing a production-grade ESP32-S3 based IoT pulse controller for self-service car wash and vacuum stations. The device receives payment commands via MQTTS or HTTPS and generates configurable “coin pulses” through dry contact and open-collector outputs into industrial controllers. The device operates in noisy industrial electrical environments (heavy motors, high-pressure pumps, and high current loads). We require high-reliability firmware that ensures 100% financial transaction integrity and extreme long-term stability. Scope of Work The selected engineer will deliver firmware with the following capabilities: • Precision Pulse Engine: Non-blocking, deterministic control of PhotoMOS SSR, Mechanical Relay (SPDT), and Opto-isolated...
...PDF, which I’ll forward immediately. • Once the parts are ready, you’ll position them inside a base housing roughly 10 in × 9 in × 2.5 in, then add a second enclosure that stacks neatly on top. • Please illustrate the electrical and fluid links: a triple-lumen 1⁄16″ ID umbilical running between the tiers, and wiring that ties a water-level sensor, a peristaltic pump, and an Arduino-class controller to the main board. A clear, uncluttered pathing of these connections is important because the model is strictly for visualising the design at this stage. Deliverables: • A fully assembled Shapr3D file (.shapr) with all components properly grouped and named. • Native files (STEP or STL) for any custom parts you build from sc...
Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.
I’m rolling out a round of improvements to an existing Laravel-based web portal that touches every layer of the stack—Blade views, controller logic, and the MySQL schema. The goal is to polish the user experience while extending back-end functionality and cleaning up a few database quirks that have surfaced as the project has grown. Scope of work • User Interface: update layouts, adjust colour/theme choices, and introduce a handful of new reusable components so pages feel consistent and load quickly. • Back-end: refine current controllers, add several API endpoints, and streamline service classes to reduce latency and improve code readability. • Database: create and run Laravel migrations for new tables/columns, refactor some existing relations, and...
I urgently need a clean, 150,000-record database of United States executives matching the following functions: CFO, CEO, COO, Project Manager, Project Accountant, Accounting Director or Controller (including supervisor / manager level), Chief Accounting Officer, Accounts Receivable lead, and Escrow Officer. Any industry is acceptable as long as the contact truly holds one of those titles. Here is exactly what I expect: • Source the contacts from ZoomInfo and PitchBook—those two platforms are mandatory for this project. • Verify every email through a recognised email-validation service and cross-check the contact details on LinkedIn so bounce rate stays negligible. • Provide each record with, at minimum, the corporate email address and the executive’...
We have an existing 6-axis driver for our plotter. We need to build a simple web interface where users can upload pictures for the plotter to draw. The system uses stepper motors with encoders and limit switches for XYZ axis. Key Requirements: - Web interface for image upload - Image-to-G-code conversion pipeline - Plotter communication and control - Support for stepper motors with encoders and limit switches - Testing and final tuning Skills Required: Python, Embedded Linux, C#, Firmware Development This is an ongoing project, estimated 1-3 months.
I'm seeking a skilled web developer to create a mobile-friendly website for my fractional CFO and financial controller company. The site should have a modern and sleek design. Requirements: - 3-4 tabs: Services, About Us, Contact Us, FAQ, Pricing - Services to highlight: Budgeting and Forecasting, Cash Flow Management, A Trusted Strategic and Financial Resource - Modern and sleek design Ideal Skills: - Experience in creating mobile-friendly websites - Strong design skills with a portfolio of modern and sleek websites - Proficiency in website development and SEO optimization - Excellent communication skills for project updates and collaboration Please provide examples of previous work and a brief outline of your approach.
...ebike throttle ( running 5v red, black (gnd) and white control wire and its controller : (DO NOT CUT these) Throttle RED (+5V) ------------------------------------ Controller RED (+5V) Throttle BLACK (GND) ------------------------------------ Controller BLACK (GND) (ONLY cut/switch the WHITE signal) Throttle WHITE (signal) ----+-----------------------------> Switch T1 | +----[ Rseries 1kΩ ]----+-----> Switch T2 = LIMIT NODE | +-----> Pot BLACK (wiper) Pot RED ---------------------------------------------> Controller BLACK (GND) Pot YELLOW ...
Embedded Firmware Engineer (ESP32-S3, MQTT/HTTPS, OTA, Local Installer Wizard) – Industrial Pulse Controller Description We are building an industrial Wi-Fi “pulse injector” controller (Payter/Nayax-like) for self-service car wash / vacuum stations. Customer scans a QR on the bay, opens our webapp, pays online, and the device generates configurable “coin pulses” (dry contact and open-collector) into the wash/vac controller. We need an experienced embedded engineer to deliver production-grade firmware for ESP32-S3 with: • Reliable Wi-Fi connectivity and auto-recovery • MQTT (preferred) or HTTPS command channel • Configurable pulse generation (timing, mapping, NO/NC/OC outputs) • Local Installer Wizard (AP mode + web UI) ...
SITUACIÓN ACTUAL: Sistema RelojControl en producción (GitHub: ) - Backend: Node.js 16 + Express + Sequelize + SQL Server - Frontend: Vue.js 2 + Vuetify + Vu...OTs asignadas al usuario) - Asignación masiva array orders FRONTEND: - Admin: (tabla OTs + checkboxes usuarios) - Operador: filtrada → solo mis OTs asignadas - Upload Excel asignaciones masivas DATABASE: - Migración Sequelize user_ot_assignments - Integrar con filtro workplace existente ENTREGABLES: - Branch GitHub: feature/assign-module-2 - Backend: models/controller/route funcionando - Frontend: componente + store asignaciones - npm run dev backend/front OK - POST /assign-ot testeado REQUISITOS: Español nativo Latam, experiencia Sequelize/Vue producción
...The focus of this project is the **base platform and system enablement**. Application-level dashboards or advanced UI development are **explicitly out of scope**. --- ## 3. System Architecture Overview ### 3.1 Hardware Platform - Custom-designed hardware (already functional) - Raspberry Pi Compute Module 4 - Ethernet and WiFi connectivity - Industrial-grade SD memory card 32MB with memory controller (or higher capacity if needed) **Important requirement:** The software architecture must **minimize or eliminate write cycles to the SD card** to significantly extend SD card lifetime (read-only root file system, RAM-based logging, or equivalent strategies). --- ## 4. Hardware Components and Peripherals ### 4.1 USB Interfaces The system uses **two independent USB ports** ...
Project Brief: Industrial 230V ESP32-C3 Toshiba AC Gateway & I/O Controller 1. Project Overview Design and develop a production-ready, CE-compliant, DIN-rail mounted (EN 60715) industrial controller for Toshiba AC systems. The device serves as a Master Gateway bridging three domains: • Toshiba AB Protocol – Galvanically isolated UART interface to AC indoor units • Modbus RTU (RS-485) – Expansion bus for modular field I/O (relays, temperature, analog modules) • Local Analog I/O – 0–10 V interfaces for direct HVAC integration The system must be stable, thermally suitable for sealed enclosures, and follow Screaming Architecture principles for long-term maintainability. 2. Hardware Specifications Power & Safety &bul...
...core engine programming. I’ll supply game design direction (it will be a frog sprite that hops tree to tree using his tongue to achieve a high score, simle arcade styled game), but to start the project I need: • 6502 assembly source code • Build scripts or makefiles that assemble a runnable ROM image • A simple demo level proving horizontal scrolling, sprite animation, collision detection, controller input, and basic audio playback • Clear documentation of memory layout, interrupts, and any mapper/bank-switch strategy used Acceptance criteria 1. Demo ROM runs flawlessly on real hardware and popular emulators for the Atari 7800. 2. Source assembles without modification using known working assemblers, matching the documented memory map. Than...
I’m building a desktop application in C# with WPF that will become the main human-machine interface for my CNC router. The immediate focus is a smooth, modern UI that drives fully automated routing operations and can later be wired to my Beckhoff controller. Scope of work • Create a WPF desktop application (targeting .NET 6 or later) with a clear, touch-friendly layout. • Implement workflow screens that guide the operator through job selection, automatic tool-change, start / pause / stop, and real-time progress feedback. • Architect the code so that all machine calls are abstracted behind a service layer; I will plug this layer into the Beckhoff PLC via ADS or another Beckhoff-compatible protocol after the UI is finished. • Include basic safety inte...
I need a mechanical engineer who can take me from a rough idea to a fully documented, production-ready CNC machin...vibration and thermal checks to be sure the design will hold tolerances under production loads. • Assembly instructions and exploded views so a fabricator can build it without guesswork. • A short design report explaining key calculations and assumptions (feeds, speeds, rigidity, repeatability targets, etc.). If you are also comfortable advising on control electronics (stepper/servo sizing, controller choice such as Mach3, LinuxCNC or similar) let me know—that will be a plus. Please share examples of CNC, robotics or other precision machinery you have designed, and tell me which CAD/analysis tools you will use. I am ready to start as soon as I fin...
...essential. Here’s what I expect at hand-over: • Detailed load calculations and equipment sizing that reflect Chennai’s climate and the thermal profile of an industrial process floor, offices, and ancillary spaces. • Single-line and double-line refrigerant piping diagrams showing branch selectors, refnet joints, and maximum allowable runs. • Control wiring schematics tied to LG’s central controller and BMS interface. • Coordinated AutoCAD (or Revit, if you prefer) drawings ready for my MEP set, with layer discipline and clear annotations. • Bill of materials listing model numbers, quantities, and recommended installation accessories. • A short design report summarizing diversity factors, simultaneous cooling/heating assump...
...what I need from you: • Data source – Shopify: I only care about the store’s Total revenue figure. A lightweight call to the REST Admin API (or GraphQL if you prefer) is enough. I will supply the private-app credentials. • Destination – Hardware counter: It connects over Wi-Fi. You can target it with plain HTTP, WebSocket, or MQTT; whichever is simplest to flash onto a common ESP8266/ESP32 controller. I can handle the flashing if you give me the compiled binary or the Arduino/PlatformIO project. • Service layer: A Python, Node.js, or similar script that polls Shopify at a reasonable interval, parses the JSON response, and publishes the updated number to the device. The script should start on boot, survive network drops, and require minimal conf...
...goal is to let learners explore immersive scenes, move between key points of interest, and interact with contextual media—text panels, voice-overs, and simple quizzes—without breaking presence or exceeding the standalone devices’ performance limits. You’ll be responsible for setting up the Unity project with the official Oculus Integration, implementing locomotion (teleport or smooth), gaze- or controller-based interactions, and an intuitive UI that works in-world. I’ll supply the learning script and any multimedia assets we already have; you’ll wire everything up, optimise lighting and textures for Quest, and deliver a signed APK along with the clean, well-commented source project. A build that hits at least 72 FPS on both Quest 2 and 3 and ...
I want to build a Windows-only application that watches the live screen, detects people—including stylised in-game characters—in real time, and immediately drives a game controller so the crosshair locks onto and tracks that target as it moves. The workflow I picture is straightforward: the program captures frames, an AI model spots the person, and a virtual stick signal (XInput, vJoy or a comparable driver) nudges the aim every frame so it stays centred. Smoothness and speed are critical. On a 1080p feed I’m aiming for roughly 60 fps with no more than 40–50 ms end-to-end latency, so techniques such as YOLOv8, TensorRT or a lightweight custom network combined with OpenCV screen capture should fit. You’re free to choose Python, C++, or another language ...
I have individual, validated firmware blocks for the STM32L432KBU6 that handle an LIS3DH accelerometer (interrupt-driven), an EM4095 RFID front-end, the MCU’s internal touch-sensing controller, and a UART-based E220-400T22S LoRa module. My next step is to merge these routines into one cohesive, ultra-low-power application on our custom PCB. Power optimisation is the top priority. I want the system to remain in STOP mode most of the time, waking through the LIS3DH interrupt and periodic RTC events. When active, each peripheral must communicate reliably without compromising the sleep budget. Key points • Integrate existing C-based drivers into a single project • Configure and test the STOP-mode strategy, ensuring wake-ups from both the LIS3DH and the RTC function ...
I need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby project). • Load: 220VAC traffic light LED modules • Operation: Continuous (24/7) • Experience with ESP32 hardware • Experience with AC mains / industrial electronics • Comfortable designing fail-safe systems • easy eda check image . PCB1 is main and then i can connect few pcbs like pcb2
hi here is my offer
I need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby project). SYSTEM: • MCU: ESP32 • Load: 220VAC traffic light LED modules • Outputs: ~19 relay-controlled channels • Operation: Continuous (24/7) RELAY CONTROL: • Relay outputs driven via 74HC595 shift registers (SPI-style) • 3 × 74HC595 chained • OE pin must have hardware pull-up (outputs OFF at boot) • ESP32 enables outputs only after startup • Relay drivers with proper flyback protection FAILSAFE / SAFETY: • Master relay/contactor that cuts power to ALL lamp outputs • Must drop on: - ESP32 crash - Watchdog timeout - Power instability • Safe power-up a...
This project involves the design and 3D printing of a PS5 controller stand inspired by a crystal-shaped geometric form. The stand is designed to securely hold the controller while enhancing desk or gaming setup aesthetics through a faceted, crystal-like appearance. The project includes 3D modeling, dimensional optimization for controller stability, and material selection suitable for 3D printing. Emphasis is placed on balance, ergonomic placement, and print efficiency, resulting in a functional and visually appealing accessory for PlayStation 5 users.
...integrators (e.g., Technomark, Sic Marking, Pryor). Machine Comparison: A written comparison of the top 3 viable setups (Brand/Model) that offer: Large flatbed area (>A2). High-frequency solenoid or pneumatic heads (>100Hz preferred). Precise force control (to create a "white" pixel without causing deep structural cracks). Technical Roadmap: Advice on the controller/software workflow. How do we feed a raster image (JPG/BMP) to a dot-peen controller efficiently? (Raster-to-Gcode vs. Proprietary software). Q&A Call: A 30-minute video call to discuss tooling (diamond vs. carbide) and maintenance. Required Expertise: Deep knowledge of CNC, Dot-Peen, or Impact Marking technologies. Understanding of brittle material processing (Glass/Ceramics) is a h...
...RESTful (or GraphQL) API hosted on AWS, with a clean data model for lockers, users, and biometric templates • Biometric logic that can accept fingerprint or facial recognition data, hash it securely, and return match / no-match results in under two seconds • Automatic locker assignment, occupancy tracking, and remote release commands, exposed through a simple JSON interface for the IoT locker controller • Admin dashboard with full access to every feature (user search, live locker status, override release, logs). A limited “demo” role will show read-only metrics for stakeholders • Encryption at rest and in transit, plus sensible key rotation and IAM policies • Written in either Node.js or Python—whichever lets you deliver clean,...
...3 project, mapping the EtherCAT I/O for the new cabinet, tweaking motion parameters where the mechanics differ, and then loading everything to the CX controller. After deployment, I will need the full functional test: start/stop, homing, safety chains, and a complete production cycle to prove repeatability. Once the arm is cycling cleanly, spend some time beside the line with my maintenance crew. A practical “teach-as-we-go” session is perfect—show them how to tweak set-points, clear common faults, and pull updated source code. Deliverables • Updated TwinCAT project files and source code • Runtime loaded and verified on the new controller • Test report confirming successful control of the robotic arm • Hands-on training plus ...
...you’ll wire those in alongside Stripe’s PHP SDK. • Navigation tweak – on the fourth item in the header slides forward to the third slot; I want that exact switch on my own menu so the user flow matches. • Light API assistance – another developer is building a REST API that powers mobile apps. I’ll need you to look over his work, answer questions, and patch any CodeIgniter routing or controller issues that block . In detail: Milestone 1 — Stripe Core Payments (Foundation) Goal: Working Stripe payment flow with DB logging + webhooks. Deliverables 1. Stripe PHP SDK installed and configured (test + live mode env keys) 2. Payment flow implemented Choose ONE: • Stripe Checkout (preferred for speed) OR • Stripe Payment Element...
I have a Yaskawa GP7 running on a YRC1000 controller, paired with an OnRobot RG2-FT gripper and a Mitsubishi M70 CNC mill. I’m ready to move from concept to a fully automated machine-tending cell and need someone who is comfortable working inside MotoSim, writing the robot jobs, and guiding the real-world deployment. Scope • Build a MotoSim simulation that shows the GP7 loading and unloading parts from the CNC, including door sequencing and part hand-off positions. • Generate clean, well-commented YRC1000 job files that I can load directly onto the robot. • Map and test the RG2-FT gripper I/O, grip-force settings, and part-present feedback. • Provide the hand-shake logic between the robot and the Mitsubishi M70 (M-codes, signals) • Supply a sh...
...driver does not support hardware rotation, and therefore the function lv_display_set_rotation(disp, LV_DISPLAY_ROTATION_90); does not work in this setup. Technical context: - MCU: ESP32-P4 - Development environment: ESP-IDF with VS Code - Display controller: JD9365D (MIPI-DSI Bus) - Touch controller: GT911 (to be implemented and made fully functional with UI) - UI: to be developed using SquareLine Studio Requirements: - Implement software-based display rotation in LVGL (landscape mode) - Integrate and make fully functional the GT911 touch controller - Integrate a graphical user interface generated with SquareLine Studio Notes: I already have a working ESP-IDF project in which the display initializes correctly (no rotation, no touch, no UI). This task requires an ...
...every technical element of a published study on an Electric Vehicle dual-charging system inside MATLAB/Simulink. That means rebuilding the paper’s mathematical models, running the same simulations, and then matching the resulting plots, tables and efficiency numbers through solid data analysis. I already have the PDF and a partial set of parameters (converter ratings, battery specs, and a few controller gains), yet several key values are missing. Your first task will be to track down or logically derive those gaps so the model behaves exactly as described by the authors. You’ll be working in MATLAB R2025a (Simulink + Simscape Electrical). Each subsystem—DC-DC converters, dual-port charger topology, control loops, and SOC estimation—must be organised, nam...
Main Controller: ESP-WROOM-32 (ESP32 module) GPIO Requirements: • 8 GPIO pins for DC motor control via motor driver IC • 2 PWM GPIO pins for servo motors • 2 GPIO pins for ultrasonic sensor (TRIG, ECHO) • 2 GPIO pins for I2C bus (shared for LED matrix driver and OLED display) • Minimum 8 additional free GPIO pins for external sensors/modules Display Interface: • LED Matrix controlled through I2C driver IC • Optional OLED display on same I2C bus (shared SDA/SCL) Communication & Programming: • USB to UART (CP2102 or CH340) for programming • I2C header exposed for external modules Power System: • 5V input via USB and/or external source • Onboard voltage regulator converting 5V to 3.3V for ESP32 • Multiple 5V output pin...
I’m building a live remote-monitoring dashboard that ingests MQTT messages from a teltonikak rtu 901 gateway along with temperature, pressure, and oxygen sensors and many other parameters from a controller. The stack I have in mind runs on DigitalOcean or AWS and is driven by Python on the back-end and JavaScript on the front-end, but I’m happy to discuss refinements if you can justify them. Current status • Devices is yet to publish raw readings over MQTT. • No cloud pipeline, storage layer, or UI exists yet. What I need next • A lightweight yet secure ingestion service (Python is preferred) that subscribes to the topics, validates payloads, and writes them to a scalable store on DigitalOcean. • A real-time dashboard in JavaScript that show...
...control system must be replaced, all electrical components re-engineered and rewired, and the mechanical assemblies fully overhauled so the machine leaves the shop in “as-new” condition. What matters most to me is proven experience integrating modern CNC controls into legacy iron without compromising accuracy or rigidity. If you have recently worked with Siemens, Fanuc, Heidenhain—or another controller you feel is better suited—let’s discuss the architecture you would recommend and why. Likewise, I’d like to hear how you handle mechanical scraping, bearing replacement, ball-screw refurbishment, and alignment so we can agree on tolerances before any metal is cut. Deliverables I expect: • Detailed retrofit plan and timeline, including cont...
...and tighten up overall API responsiveness. Your main focus will be feature development; at the same time, I’d like you to dive into the current API layer, profile its performance, and trim any bottlenecks you uncover. Here’s how I picture the collaboration: • Feature work – create well-structured, fully tested modules that slide neatly into the current codebase. • API performance – audit controller logic, queries, middleware and caching, then refactor for noticeable speed gains. Please document the before/after metrics you record with tools such as Laravel Telescope, Horizon, or Xdebug so improvements are clear. I work with Git, run deployments through Forge, and rely on PHPUnit for automated tests, so your pull requests need to pass the pip...
I’m building a proof-of-concept access controller that uses Fujitsu’s PalmSecure sensor on a Raspberry Pi. I already have the broad concept sketched out; what I need is a partner who can take it from idea to a working, desk-tested prototype. Hardware setup, software development, and full PalmSecure integration are all in scope. That means choosing the right Pi model, wiring the PalmSecure unit and any relays/LED indicators, and making sure the power budget is solid. On the software side I’m leaning toward Python or C++ on Raspberry Pi OS, but I’m open as long as the PalmSecure SDK runs reliably on ARM. The application must handle: • User authentication via palm-vein templates • Secure data storage and quick retrieval of templates and event logs ...
I’m building a Spring-based service router and need robust CSRF protection on all API endpoints. The idea is to leverage Public Key Infrastructure so that every incoming request carries a verifiable, signed token before it reaches any controller logic. Here’s the core of what I’m after: • A Spring Security configuration (Boot-compatible) that intercepts every request—GET, POST, anything—and checks a PKI-backed CSRF token. • A lightweight way for upstream services or clients to obtain and refresh that token; we can refine the flow together once you see my current architecture diagrams. • Server-side validation that ties the token to the session (or an equivalent stateless approach) so replay attacks are blocked. • Clean, re...
Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.
...locations, so the solution must support centralized control, secure remote access, and centralized data storage. Scope of Work Windows Setup Install & configure Windows 11 Pro on all 25 devices Domain join & centralized login Security hardening, updates, optimization Microsoft Server Setup Install & configure 1 Windows Server 2022 as master device Configure: Active Directory (Domain Controller) User & group policies Central authentication Centralized Login & User Data Configure system so: Any user can log in to any PC or laptop User can access their files & folders from any device Implement best-practice solution (Folder Redirection / Roaming / Modern equivalent) NAS Configuration Configure NAS for: Central file storage User-wi...
Create a portrait-oriented, cozy, ...the man, very touchy and comfortable, not posed. Man: brown hair with visible gray, glasses, short beard. Wearing Dr Pepper pajama pants and a subtle nerdy graphic T-shirt. PC gaming setup subtly visible near him. Woman: long wavy hair with a slightly red tint, no glasses, flattering but natural features. Wearing leggings and a soft T-shirt in complementary colors to his outfit. A PlayStation controller rests near her. Include one open Dr Pepper can, one unopened can, and a nearby 12-pack, recognizable but understated. Background includes minimal nerd hints only (Star Wars or D&D elements), very subtle and not dominant. Camera angle should feel candid with a slight side view and gentle overhead feel. No text. Clean, Comic book style wit...
Our perinatal care application runs on the classic .NET Framework with an MVC architecture over a MySQL data store. The current print-friendly forms for the patient’s perinatal history are only half wired: the controller does not yet retrieve every field we need and the Razor templates themselves need several small layout tweaks. The assignment is to: • extend the existing controller so every relevant perinatal-history field is queried from MySQL, mapped to the correct view model, and passed to the view • refresh the print templates (we already have them, they just need updates) so the output matches the supplied layout exactly, including headers, footers, and page breaks • run through enough test cases to prove data integrity and visual consistency...
Provide remote KNX consulting to diagnose and optimise the HVAC / fan‑coil control in your Abdulla_villa project. The focus is on the 9 ABB FCC/S1.1.1.1 Fan Coil Controllers, the ABB RoomTouch panels used as room controllers, and their integration with the 1Home server and Crestron Home. Deliverables: 1. Review & mapping 2. Parameter recommendations – for one reference room (Fan Coil Controller: 1.1.22)
Need software enginner who will help for STM32 Programming Skills required : 1. C Programming and debugging 2. should know Free RTOS Concepts 3. Shall b...the input working using LORA and INTERNET (may be SIM800 Module) Process : 1. Requirement document will be provided 2. design document shall be prepared and reviewed after that only code shall be done 3. Must Follow MISRA 2012 Standards code shall be sent for review and review comemnts hsall be implemented 5. code shall be archived in github NOTE : the code shall be implemnted on STM32 Controller , so the person develoing should have STM32 Discover kit with him . I stay at bangalore ,so if you are in bangalore you can take from me for development purpose. i am excited to work with intellengent and wonderful people over t...
Assalam o alaikum, I am looking for MATLAB & Simulink Experts having expertise in following areas: Digital Signal Processing | Filter design | Fourier analysis Image Processing | Object Detection | Image Segmentation | Feature Extraction Control systems | PID Controller design | Observer design Power Systems | AC-DC Hybrid Micro-grid | Fault detection | Energy Management Artificial Intelligence | Machine Learning | Python Neural Networks | ANFIS | Fuzzy logic Actually I have multiple projects and I already have a team of engineers working on them but due to workload I am looking for few more engineers to be a part of my team and work with us on long term basis.
Project: Finalize real-time joystick controller (PID/MPC tuning, smooth tracking, stability) We have an application that is nearly complete. The remaining work is the joystick control layer: converting tracking error into smooth, stable analog stick commands (RX/RY) in real time. This is NOT a computer vision model training job and NOT a machine learning task. Detection/tracking and state estimation are already implemented. The work is primarily control engineering + signal shaping + real-time tuning. What you’ll do Improve RX/RY command generation for fast acquisition and smooth steady tracking Reduce jitter, stick-slip, overshoot, stalls, and inconsistent corrections under noise/latency Tune and/or redesign: error normalization & scaling response shaping (curves,...
I’m refreshing the visual identity of First Quest Mods, new video-game modding site, and need a logo that feels as forward-thinking as the mods we build. The style direction is modern and sleek. Instead of a generic controller or joystick, I want a distinctive custom mod icon that instantly signals “creative tinkering” and programming to gamers and developers. Color is completely open—feel free to experiment—as long as the final mark holds its punch on both light and dark backgrounds. Strong contrast and clean geometry will be key. Deliverables • Vector master files (AI, EPS, SVG) • Stand-alone icon and full word-mark lockup • Horizontal and stacked versions • Transparent PNGs plus a favicon set • Light-theme and dar...
I am looking for a freelancer to design both the schematic and PCB layo...with 3 or more ports ---> One port connected to the STM32 using RMII ---> Two other ports connected to SFP sockets -> The Ethernet switch can be Microchip KSZ8873 or a similar compatible device -> No high-speed requirement: ---> 10 Mbps is sufficient ---> 100 Mbps is more than enough Firmware requirements -> Firmware does not need to be complex -> It is sufficient to: --> Enable the Ethernet controller using STM32CubeMX --> Load a basic example so the board responds to PING -> No application-level features are required Scope of work -> Complete schematic design -> Complete PCB layout (including Ethernet, SFP, power, clocks, etc.) -> Design must be done in KiCad ->...
