Print my 3d model työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    220 print my 3d model työtä löytyi, hinnoittelu EUR

    Hi, I need some one who can 3D model my logo. I need the output in STL format as I will 3d print. Interested people please contact.

    €15 (Avg Bid)
    €15 Keskimäär. tarjous
    43 tarjoukset

    ...who can help me create a 3d model of small parts that often go missing so I can 3d print them. They are very small simple parts, but I just dont have the software or ability to create the 3d files. Looking for someone with some knowledge on how to design a 3d model to be 3d printed. Thanks for taking your time looking at my inquir...

    €35 (Avg Bid)
    €35 Keskimäär. tarjous
    7 tarjoukset

    I’m looking for someone to take. Image of a finger print of my late Mother and create a 3D mould that can then be used to transfer the actual finger print to a clay mould to create a piece of jewlery as a keep sake for my family to remember our Mother, the image was take using Garda finger print ink and is in a flat surface, so a high Rest image will

    €145 (Avg Bid)
    €145 Keskimäär. tarjous
    67 tarjoukset

    I need 3d printable model of the mask from movie Black Panther. - life size (1:1 replica) - fully detailed (extreme level of details) - model in one piece (air tight, merged, welded together) - 3D Print Ready (stl and obj file extension) (*please do not waste my time by biding on this project if you can't deliver)

    €162 (Avg Bid)
    €162 Keskimäär. tarjous
    48 tarjoukset

    Hello I am looking for a professional who translate my ideas into a 3d model ready to print, attached you can see the job of my previous contact, I am looking for something similar. Ideas will be given either in a handmade draw or a picture (see attached). Jewelry modeling will be much appreciated as well as jewelry casting and vacuum process knowledge

    €392 (Avg Bid)
    €392 Keskimäär. tarjous
    74 tarjoukset

    I'm looking for someone who is able to create a 3d model caps (see picture) that I will be able to print on my 3d printer (Tevo Tarantula). It's for my old car, for personal use. Need an exact replica high quality. Just the top to create, the back can be flat.

    €21 (Avg Bid)
    €21 Keskimäär. tarjous
    8 tarjoukset

    Hi, I am looking to 3d print a case and container for a small motor to power my canoe. The case will contain: 2 x 10cm diameter motors with impeller 12 batteries in Battery cases 2-4 round switches I have mostly drawn the above as components in 3D already and can give precise measurements for anything I have not drawn. The housing will need a lid which

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    12 tarjoukset

    I want to print a 3D model for my architecture diploma. I created the model with SketchUp, but when importing to Netfabb there are a lot of errors, so it cannot be printed with the 3D printer. I am looking for someone to find out what's wrong with my model and repair it.

    €54 (Avg Bid)
    €54 Keskimäär. tarjous
    37 tarjoukset

    ...make me a 3D model of a character (pictures) so i can 3D print it on plastic or resin, about 25 cm tall. This model would have to include the base and letters as the picture, but i would like to have them modeled separately so i can put them together later, since most 3D printers don't print over 20cm tall. I hope you can help me, sorry for ...

    €194 (Avg Bid)
    €194 Keskimäär. tarjous
    62 tarjoukset

    Hi Victor V., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I needed to design a color 3d model of a hindu diety. Accepted formats are For color 3D prints: DAE, WRL, X3D, X3DB, X3DV You can customize it using your own creativity while staying as close as possible to the original theme. here is

    €86 (Avg Bid)
    €86 Keskimäär. tarjous
    1 tarjoukset

    Job title : 3D modelling of a product. Job description: I want my product idea converted into 3D model, so that I can 3D print and test it. More details will be shared to hired person.

    €60 (Avg Bid)
    €60 Keskimäär. tarjous
    1 tarjoukset

    ...looking for a Designer with 3D modelling expertise that can convert my Architect’s 3D CAD model .dwg file to a format that I can print out on a 3D printer for use at an Expo in early July. My company is a Modular building company that builds 5-star hotels using steel modules that look like shipping containers. The model you will b...

    €223 (Avg Bid)
    €223 Keskimäär. tarjous
    24 tarjoukset

    Hello, I need someone that can model up three products that I intend to 3D print, and eventually go into production with, they are Bookends/PaperWeights/BookHolders . You will be provided with a brief for each item, rough images, and dimensions. The shapes are 'Polygon' style in nature. Simple, but geometrically outside my skill level and time capacity

    €105 (Avg Bid)
    €105 Keskimäär. tarjous
    19 tarjoukset

    Hi there! I am making a gift for my wife. I have a Makerbot Replicator Mini+ and need a model made that I can easily 3D print using it. I am looking for a geometric/abstract/polygon type figuring of a man and a woman walking a German Shepherd. Do not use a skirt/dress for the woman, and no leash is required for the dog. I would like it to be 2-3 inches

    €69 (Avg Bid)
    Taattu
    €69
    15 työtä

    ...Gauntlets 3d printing them. I allready have the model extracted from the game tho it needs some work on it befor getting printed, finger must be able to move and it has to be splitted up so that it will print in my surface area and be assembled later on. Priority is the gauntlet tho being able to print the rest of the armor is a plus. 3d printer surfa...

    €237 (Avg Bid)
    €237 Keskimäär. tarjous
    16 tarjoukset

    Hi my love bird lost her foot. I want someone to make a 3D model of a love bird foot so that I can 3D print it and attach it the her leg. You can come up with the design on your own but I want her to have a realistic food but obviously it will be made out of plastic.

    €54 (Avg Bid)
    €54 Keskimäär. tarjous
    38 tarjoukset

    I need a 3D model of something. Multiple ongoing projects 2D artwork & 3D modeling. Skills in concept art, character illustrations, character action scenes, hyper realism, 3d sculpting, textures, animation and rigging are a must. Multiple file formats needed including 3d printing formats. I am seeking a talented artist who is willing to take on a

    €12403 (Avg Bid)
    €12403 Keskimäär. tarjous
    46 tarjoukset

    I require a custom designed 3D model of a race mechanic (overalls and helmet) whose hands are arranged to hold a stick. This is so a lollipop can be held by the figure (example photo attached). I have recently purchased a few .stl figures from Heroforge and printed them on my 3D printer (4 different poses attached) but because that is a site for

    €155 (Avg Bid)
    €155 Keskimäär. tarjous
    7 tarjoukset

    I need a TEMPLATE (Adobe Illustrator) for my Infographics on a photography blog (it's not online right now) as well as for print projects (photography related) and - for example - Pinterest Campaigns to have a consistent look over these platforms. The focus for this challenge is more on style (color scheme, Typography, Frame yes/no, style of background

    €63 (Avg Bid)
    Taattu Sinetöity
    €63
    2 työtä

    I have a model in revit but I need it to be 3d print ready. Meaning fixing everything and making it a solid component to work in 3rd printer. If you have to redo it from scratch to make it work then do it. If you have to remove some parts then we will negotiate that. Just make it work 100% for 3d printing.

    €164 (Avg Bid)
    €164 Keskimäär. tarjous
    70 tarjoukset

    ...want to print my 3d models but I can't because there is an error when I upload them. Make my files 3d printable. I have 3 files in skp and stl format. Step 1 - Make Sure the Model is Seamless! Step 2 - Hollow the Model for Lower Prices Step 3 - Eliminate Non-Manifold Geometry Step 4 - Check Surface Normals Step 5 - Convert Your Mo...

    €133 (Avg Bid)
    €133 Keskimäär. tarjous
    57 tarjoukset

    I need a 3D Model of a MINI GOLF BALL MOULD (Two Piece Mould/ Both Sides). Gold Ball Size: 16mm Diameter Dimple Qty. +/- 300 I need it in SKETCHUP, nothing Else. Thus must be a .SKP File Type. I will print it on my 3D Printer at a stage, but will use CURA for that. Two Piece Mould will be used to make Mini Golf Balls from clay for video

    €134 (Avg Bid)
    €134 Keskimäär. tarjous
    7 tarjoukset

    I am having my site blue print. I need someone to build that into 3d movie model. I am having too low level knowledge on the implementation and how long it will take. I am ready to spend 5-10k

    €111 (Avg Bid)
    €111 Keskimäär. tarjous
    27 tarjoukset
    Car design project Loppunut left

    I need a 3D model of car body for SLS print. I want to transform my drawings in to 3D model. NDA is a must. If the first stage of modeling will be successful than I would like to continue cooperation with more advanced designs.

    €906 (Avg Bid)
    €906 Keskimäär. tarjous
    51 tarjoukset
    3D Model design Loppunut left

    My name is Mike Spencer. I am designing a drainage tray. I am in need of a 3D model so I can print a prototype. The dimensions are pretty simple. It is 2 pieces: 1 main bottom tray about 16" in diameter with a drainage spout, and 1 perforated grate. Obviously there are other details but overall it is not too complicated. I have pictures of a mock-up

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    24 tarjoukset

    negative 3D print (original size) of a .stl file to afterwards use as a form to build carbon parts.

    €1066 (Avg Bid)
    €1066 Keskimäär. tarjous
    25 tarjoukset

    ...and need 2D drawings and a 3D model (created from those 2D drawings) to document the current window dimensions, shapes and features. The 2D files must contain measurements, and callouts (that I will provide) so I can print blueprints. I will provide photos and pencil/Powerpoint sketches of the measurements. The 3D model should be zoomable and viewable

    €143 (Avg Bid)
    €143 Keskimäär. tarjous
    27 tarjoukset

    Hi there, I am Phil. I would like your help in my ANSYS (dynamic and static) model. The first part of the project is the 3D CAD design of the wheel (with an internal inclusion) and the rail according the railway standards. The second part is the simulation of wheel rotation of a rolling set at 80Km/h with an axial load of 130KN (dynamic analysis

    €288 (Avg Bid)
    €288 Keskimäär. tarjous
    16 tarjoukset
    Design project Loppunut left

    I need a 3D model of something. Hi, my company and I are looking for a quick 3D design. We have an idea for a new product and would like to 3D print an initial prototype. We are looking for someone who can develop quickly. Thank you, Aaron

    €223 (Avg Bid)
    €223 Keskimäär. tarjous
    5 tarjoukset

    I 10 graphics of my product to promote it online and through print media. The ads should be High res. with vectors vectors and 3D model of the product.

    €79 (Avg Bid)
    €79 Keskimäär. tarjous
    7 tarjoukset
    Ship Galley Loppunut left

    Hello, i can create a 3d model but i cannot do the rendering in order to be more realistic. I can export the file in stp, stl. My models is most of them galley. Files explanation: export: the file types that i can export from my 3d program galley and 02 mine sample view that is my purpose, 01-mine: print screen from my 3d progr...

    €34 (Avg Bid)
    €34 Keskimäär. tarjous
    15 tarjoukset

    This project is simple. According to attached image I will send you some reference images for 5 types of models then you make a 3D model and finally I will 3D print your models for my board game.

    €196 (Avg Bid)
    €196 Keskimäär. tarjous
    55 tarjoukset

    Dear Freelancer PLEASE READ ALL INFO!! I am looking for a new freelancer to work on my 3d projects. This first project will be 4 exterior and 4 interior renderings. However the exterior is going to be almost exactly same for two of them, only difference is because we are showing two versions of almost same house. With an extra addition on the

    €371 (Avg Bid)
    €371 Keskimäär. tarjous
    23 tarjoukset

    ...other). - Model View Controller Pattern and a local database for containing images, metadata of products. - 6 different items in Master Menu listed below: “Homepage” containing a nice graphic, either as a picture or 3D rendering; “List” of products with pictures for each model, together with pricing information for multiple print mater...

    €166 (Avg Bid)
    €166 Keskimäär. tarjous
    33 tarjoukset

    Hello, I'm looking to cut a pre-existing 3d model into 4 different parts. The model can be found in the link below. I have also uploaded a powerpoint that shows how exactly this needs to be cut. In the end, I need 4 pieces that are 4inch by 6inch in STL file format. The base will also need to be about 3mm thick. Any building that are cut in half

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    3 tarjoukset

    I have a 3d scan of myself which was executed at last year's nvidia GTC in San Jose [kirjaudu nähdäksesi URL:n] I want to print me out and give myself to my kids and assorted family members for xmas. The model needs some editing - there are a couple of artifacts - and might benefit from some post processing. It's pretty high res and I think ...

    €86 (Avg Bid)
    €86 Keskimäär. tarjous
    16 tarjoukset
    Trophy icon 3d project of a coin Loppunut left

    I have a 2d model (2d [kirjaudu nähdäksesi URL:n]) for a coin that I need to be design as a 3D model (STL) for print in high resolution resin. It has my son face and some details in both sides, attached you will find the coin in 2d ready, and the images used as references. It should be completely solid, the printing bureau said something like this: ...

    €9 (Avg Bid)
    Taattu
    €9
    1 työtä

    i have an idea for a 3D model that i want to 3D print after. i will provide everything needed "3d models" and you just have to use your skills in 3d modeling software to mix them and create my idea. must have history in 3D printing.

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    32 tarjoukset

    ...[kirjaudu nähdäksesi URL:n] I need someone to create the similar 3D model. It need to be read for 3d print. Please check the link and let me know how much would it cost in your bid proposal to model one of this. Check also the video link here to understand better: [kirjaudu nähdäksesi URL:n]

    €1650 (Avg Bid)
    €1650 Keskimäär. tarjous
    47 tarjoukset

    ...process of building a model of this ship. I posted about this on a 3d printer forum and someone suggested I ask here. The China was one of three identical sister ships on the Great Lakes. They were the first iron passenger ships on the lakes. Built in the 1880's they were as you can see very ornate Victorian ships. I have never seen a model of these ships

    €392 (Avg Bid)
    €392 Keskimäär. tarjous
    68 tarjoukset

    Looking for a 3d model of the general Ursus pistol from the original planet of the apes series in the 70s. This is the pistol that looks like it's made from wood. It's a pretty simple design, I have photos from all sides I can provide. Looking for something I can print on my son's 3d printer.

    €103 (Avg Bid)
    €103 Keskimäär. tarjous
    7 tarjoukset

    ...need the help of an expert guy to make my 3D model perfect and as close to as possible to the expected level I attached. I made this model in Maya 2013 and i request you to take .mb files from me and make it good enough to present to my client. character image attached is the character to be modeled and my model image is also attached to show ...

    €67 (Avg Bid)
    €67 Keskimäär. tarjous
    10 tarjoukset
    Camera Pole mount Loppunut left

    3D Model that I can use to print with my Maker Select 3d printer. It is for mounting a camera on a pole. I have included a picture and sketch of what I need. I only need the camera mount piece and a short pole. I don't need any of the hole modeled, just the U-shape piece and a pole 1. 3D Model that I can use with Cura for the U-shape piece...

    €155 (Avg Bid)
    €155 Keskimäär. tarjous
    12 tarjoukset

    Hello , i have sketch , you need to do 3d model (SOLID WORKS, INVENTOR, in my size "VERY IMPORTANT SIZE "to be correctly converted to print in 3d Printer . 15 $- one model

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    33 tarjoukset
    Trophy icon Design An Amazing 55' House Boat! Loppunut left

    ...ago. It was a sad day. The Kween was a 40 ft aluminum, twin engine, house boat made by a company (now extinct) called Kingscraft. It was an awesome boat and I want another! My boat partner and I purchased a 55' x 15' Kingscraft and soon it will begin a 2,400 mile journey from Page Arizona North to it's new home in Yellowknife, Northwest Territories

    €191 (Avg Bid)
    Taattu Sinetöity
    €191
    4 työtä
    Design project Loppunut left

    I need a 3D model of something. i need a 3D print of a diamond play button from youtube my son really wants one

    €36 (Avg Bid)
    €36 Keskimäär. tarjous
    8 tarjoukset

    I need help using 3D Max mParticles to generate a matching asymmetrical gear. Please see the attached documents. The gears depicted in [kirjaudu nähdäksesi URL:n] used proBoolean to subtract multiple copies of the gear #1 from gear #2. The result illustrates the result I am looking for, but does not have the detail I want and the

    €193 (Avg Bid)
    €193 Keskimäär. tarjous
    28 tarjoukset

    THIS IS A CREATIVE THINKING TASK THEN CONVERT TO 3D MODEL TO PRINTING ************************************************************************************* PLEASE READ AND UNDERSTAND CAREFULLY. ########################################################## If you have already worked with Business, Management Consulting; Marketing Consulting; Advertising

    €423 (Avg Bid)
    Mainostettu Taattu Sinetöity Huippukilpailu Salassapitosopimus
    €423
    10 työtä
    Design project Loppunut left

    I need a 3D model of something. Hi, I've been shopping around for someone to print up what I have come up with. I have some basic measurements and drawings but as they have all told me, to print up my design I will need further in depth drawings and measurements and that's where I'm stuck. If you could help please get back to me asap.

    €136 (Avg Bid)
    €136 Keskimäär. tarjous
    52 tarjoukset