Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    96 pinmux tiva työtä löytyi, hinnoittelu EUR

    We are a small company with a custom board based o...Black). During prototype revisions we've been running with Linux kernel 4.14 kernel provided by in the TI-SDK. With 4.14 going End-Of-Life in Jan 2024, we want to migrate to Linux kernel 5.10. I have been trying to bring the board up on the latest SDK/5.10 Kernel with difficulties. Although the board boots and we have serial communication, there are issues with the peripheral devices (ethernet, pinmux gpio, etc) I attribute to DTS changes in the SDK and kernel differences. We no longer employ someone with this skillset. We are looking to outsource the migration to the latest SDK. The latest TI-SDK contains, • U-boot 2021.01 • Linux kernel 5.10.100 • gcc-x86-arm-9.2-2019.12 toolchain ref:

    €4093 (Avg Bid)
    €4093 Keskimäär. tarjous
    7 tarjoukset

    By using tiva c series tm4c123g board, a mini project code & circuit diagram needs

    €14 (Avg Bid)
    €14 Keskimäär. tarjous
    2 tarjoukset

    We want to make a microcontroller control card for the inkjet system. (HP45 cartridge is our preference.) Main card has to control DC motor and step motor. Microcontroller will be USB or serial port controlled. (MCU: STM32 or TIVA TM4C123G.) Below is the reference link.

    €505 (Avg Bid)
    €505 Keskimäär. tarjous
    10 tarjoukset

    We have a project where the Ardupilot library is to be used with controller Tiva C Launchpad from Texas Instruments. Please note that this is not a currently supported by the community. This is a new development, do share your thoughts. If you are new to Ardupilot, it's an open source software library built to operate different type of vehicles. For more details on it, visit the following link.

    €568 (Avg Bid)
    €568 Keskimäär. tarjous
    3 tarjoukset

    ...LED Yellow. When the Alarm goes off toggle between RED and BLUE and generate a 1KHz tone on the Piezo buzzer. Key Action 0 Toggle between 24 hour time and 12 hour time. 1 Time setting mode 3 Alarm setting mode 4 Hour Setting using potentiometer 5 Minute Setting using the potentiometer 6 Toggle seconds between 0 and 60 * Accept the hour or minutes # Stops the Alarm The system will consist of two Tiva boards. One board is to be the clock and the alarm, and the other board for the displays (numeric keypad and the terminal). The two boards must communicate using a packet based protocol that you design and it must use an interrupt driven serial communication that is not a UART. You may draw the seven segment displays on the Terminal. See the following link to use colours...

    €111 (Avg Bid)
    €111 Keskimäär. tarjous
    8 tarjoukset
    Trophy icon Modern Logo- Modeling Agency Loppunut left

    We want a modern logo designed in gold that uses the designs in the uploaded attachments for our modelling agency, 1. The name of the logo is “Tiva, Inc.” So, the words Tiva, Inc. should be on the logo. 2. We want the words to be in the same gold color and font as the Sunshine sample logo in the uploaded files, 3. We want a sample of the logo with a black background and with the same gold color background as in the Sunshine sample logo attachment. 4. We want a sample of the logo with any of the design frames have included in the attachments. However, a frame is not necessary, 5. We want to see samples of the logo with the coon cat and with the birds designs included in the attachment, Thank you for your entries.

    €46 (Avg Bid)
    Taattu
    €46
    431 työtä

    i need help for my project with Tiva C Launchpad

    €94 (Avg Bid)
    €94 Keskimäär. tarjous
    5 tarjoukset

    i need help for my project with Tiva C Launchpad

    €182 (Avg Bid)
    €182 Keskimäär. tarjous
    7 tarjoukset

    Hello, I would like to run few things on Tiva microcontroller while displaying the data on the 4d systems touch screen, which can use either SPI or Serial communication. I am attaching the display module link and the tiva series I am talking about.

    €249 (Avg Bid)
    €249 Keskimäär. tarjous
    5 tarjoukset

    PHP,MySQL,JavaScript,Bootstrap to implement solution with cookies, etc. I have a story board with the forms that I would like to use to gather the event info that will end in MySQL tables.

    €34 / hr (Avg Bid)
    €34 / hr Keskimäär. tarjous
    55 tarjoukset

    Hello brother, I have a project related to tiva launchpad.

    €93 (Avg Bid)
    €93 Keskimäär. tarjous
    1 tarjoukset

    Hi, its me, Tennesse99 :) I have to continue on this on this account. I hope that is okay. I am making the payment for the assignment segment A-B-C, delivery time until Wednesday 8PM IST

    €61 - €61
    €61 - €61
    0 tarjoukset

    Hi Aditya C., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €61 - €61
    €61 - €61
    0 tarjoukset

    I need to use Kail to program Tiva C microchip and make a small piano. budjet is 40 usd

    €96 (Avg Bid)
    €96 Keskimäär. tarjous
    2 tarjoukset

    I need to use Kail to program Tiva C microchip and make a piano. budjet is 40 usb

    €82 (Avg Bid)
    €82 Keskimäär. tarjous
    2 tarjoukset

    I need to use Kail to program Tiva C microchip and make a piano. budjet is 40 usb

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    4 tarjoukset

    I need to use Kail to program Tiva C microchip and make a piano. budjet is 40 usb

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    1 tarjoukset
    make piano on keil Loppunut left

    I need to use Kail to program Tiva C microchip and make a piano. budjet is 40 usb

    €28 - €232
    €28 - €232
    0 tarjoukset
    make piano Loppunut left

    hello , could you help me with my lab? I need to use Kail to program Tiva C microchip and make a piano.

    €198 (Avg Bid)
    €198 Keskimäär. tarjous
    3 tarjoukset

    people with good knowledge on tiva c microcontroller. who are good at using it, please text me back.

    €101 (Avg Bid)
    €101 Keskimäär. tarjous
    3 tarjoukset

    I need help with tiva c microcontroller. if you can help me out text me back.

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    1 tarjoukset

    I need help with tiva c microcontroller. text me back if you are interested in it.

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    1 tarjoukset
    Project for Mehmed Loppunut left

    I need help with tiva c microcontroller. text me back if you can help me out.

    €6 (Avg Bid)
    €6 Keskimäär. tarjous
    1 tarjoukset

    I need help with tiva c microcontroller. text me back if interested

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    1 tarjoukset

    I need help with tiva c launchpad.

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    1 tarjoukset

    I need help in experimenting with tiva c launchpad

    €6 (Avg Bid)
    €6 Keskimäär. tarjous
    1 tarjoukset

    Anyone with good skills on tiva c launchpad please let me know. I need help with some experiments.

    €6 / hr (Avg Bid)
    €6 / hr Keskimäär. tarjous
    3 tarjoukset

    I want to hire a tutor who can help me understand and solve the embedded C workshops based on Tiva ARM cortex in keil uVision software. This will involve working with GPIOs, UART and Interrupts.

    €112 (Avg Bid)
    €112 Keskimäär. tarjous
    6 tarjoukset

    The following functions should be fulfilled in this project 1. Be able to generate variable 5 - 10kHZ square wave frequency with 50% duty that requires to drive H-bridge IGBT circuitry with dead band. 2. Be able to phase shift by adding delay to the square wave on each individual channel 3. Be able to change the frequency and phase shift by 1 Hz and 1us respectively by toggling GPIO high/low. 4. Be able to store switching frequency, phase shift delay in memory and shall retain on power up.

    €151 (Avg Bid)
    €151 Keskimäär. tarjous
    8 tarjoukset

    ...with 1000 readings per cycle needs to be received by a TI Tiva board. Should find metal objects 1-1,000,000 cm3 at depths 1-300cm underground. Wire material enameled copper (later enameled aluminum). TDEM-principles need to be understood. TDEM-Patents need to be read. (google geonics & ebinger). An analysis of read papers needs to be given to check rate of understanding. Pictures of existing PCBs of an old pro version must be analyzed. Focus needs to be on super light weight construction. The TDEM-detector will be mounted under a drone travelling up to 25m/s if possible. Power supply will be lipos 6s batteries (up to 44V as seriel). you need to be fully equipped with the tools needed. project-dependent components are paid (wires/pcb/tiva board). If this challenge sound...

    €1958 (Avg Bid)
    €1958 Keskimäär. tarjous
    9 tarjoukset

    ...with 1000 readings per cycle needs to be received by a TI Tiva board. Should find metal objects 1-1,000,000 cm3 at depths 1-300cm underground. Wire material enameled copper (later enameled aluminum). TDEM-principles need to be understood. TDEM-Patents need to be read. (google geonics & ebinger). An analysis of read papers needs to be given to check rate of understanding. Pictures of existing PCBs of an old pro version must be analyzed. Focus needs to be on super light weight construction. The TDEM-detector will be mounted under a drone travelling up to 25m/s if possible. Power supply will be lipos 6s batteries (up to 44V as seriel). you need to be fully equipped with the tools needed. project-dependent components are paid (wires/pcb/tiva board). If this challenge sound...

    €998 (Avg Bid)
    €998 Keskimäär. tarjous
    9 tarjoukset

    i am 2 very small/simple microcontroller programs i need help with. i have an extremely tight deadline so help asap is requested. it is coding a tiva c microcontroller in code composer studio embedded c. please see attached task. also attached is my attempt at the first task, however it does not work. note i configuration of the microcontroller should be correct it is just the main functions i need help with.

    €30 (Avg Bid)
    €30 Keskimäär. tarjous
    4 tarjoukset

    I need a developer who has experience with mbed TLS and lwip to implement the TLS layer on a project that currently has MQTT and HTTP tasks running FreeRTOS on a TM4C1294 ARM processor. The Tiva TM4C1294 dev board and CCS can be used to complete the code development.

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    2 tarjoukset

    I need to learn the interfacing between ARM Cortex M4 (on Tiva C lunchpad) and a generic Sensors (Gyro/Accelerometer) like ICM-20948. I'll need tutor to guide me through the steps and concepts.

    €19 / hr (Avg Bid)
    €19 / hr Keskimäär. tarjous
    7 tarjoukset

    there are multiple parking slots. the program will keep on checking which slot is available . and also meanwhile will count the time of a car occupying any slot.

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    1 tarjoukset

    Hello! I have few task to complete on Texas Instrument "Tiva™ TM4C129ENCPDT Microcontroller". IDE for that is Code Composer Studio. Programming Language C. Need a quick response.

    €162 (Avg Bid)
    €162 Keskimäär. tarjous
    8 tarjoukset
    Embedded Project Loppunut left

    The project is as follows: 1. The project uses TI Tiva C Board. There are four transmitting stations and one receiving station. 2. Each transmitting station has a Arduino Nano board + LM 35 temperature sensor + HC-05 Bluetooth module. 3. Base station continuously receives temperature readings from the four transmitting stations. The base station will have a TI Tiva Board + HC - 05 Bluetooth module + Nokia 5110 LCD + Speaker. 4. If the temperature goes below a specific value, the temperature reading will start flashing on the Nokia LCD for that respective transmitter and an audio message will be given for the user. 5. We want to store the pre-recorded warning messages in an SD card/ Flash memory of Tiva board and use DMA (Direct Memory Access) to fetch them and giv...

    €83 (Avg Bid)
    €83 Keskimäär. tarjous
    2 tarjoukset

    hey there,I need expert to help me out in C programming for my ARM Cortex Tiva Launchpad? Only timer is required. The deadline is 26th April, so apply asap

    €70 (Avg Bid)
    €70 Keskimäär. tarjous
    5 tarjoukset
    engineering Loppunut left

    Use C coding to create time delay for the Stellaris Arm Cortex Tiva Launchpad's LED to blink at a certain rate. Other codes are given - theres a template for it.

    €137 (Avg Bid)
    €137 Keskimäär. tarjous
    5 tarjoukset

    i am creating a mechanical leg which will be controlled by a tiva board. The leg will have two servo motors which will be controlled by a servo motor.

    €541 (Avg Bid)
    €541 Keskimäär. tarjous
    4 tarjoukset

    Looking for someone to port FreeRTOS+TCP to the TI Tiva-C (TM4C1294NCPDT). Must Implement at a minimum the following Demos: The CLI using a UDP Socket HTTP Web Server TCP Echo Server UDP Logging 1 Second On/1 Second Off Blinking LED to show the system is alive (Can be a task or a timer) Should also include the Tivaware library for hardware access IDE be either Code Composer Studio Must be FreeRTOS+TCP

    €223 (Avg Bid)
    €223 Keskimäär. tarjous
    2 tarjoukset
    Rtos Programming Loppunut left

    Rtos programming will be made with Texas instrument Tiva C series Launch pad will be used. TM4C1294 model. Code Composer studio will be used. Details of the data sheets etc in the attachment TASK: They realize a production factory. Each task assumes the role of a production line (PD). You can start a PD at the touch of a button or keyboard (There may be N PD, the upper limit of N is up to you, example N = 10). You can also customize the production speed of each task by entering it (for example, it can be varied from 1-5 product / second up and down). You also need a task to read in the inputs and to transmit and control them. The input can be made via polling or interrupt. You need a display manager (also a task) that handles the output. Number and ID of the active tasks Number...

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    3 tarjoukset

    want C programmer who can write an application for ADC and LAN combination. Take 12 channel input data from ADC, store it in one packet and send it over network via LAN port. Microcontroller: TI Tiva C series TM4C129 Note: hardware you have to manage on your own.

    €199 (Avg Bid)
    €199 Keskimäär. tarjous
    5 tarjoukset

    PCB for the system contains Tiva MCU, opamps and Si devices

    €13 / hr (Avg Bid)
    €13 / hr Keskimäär. tarjous
    4 tarjoukset
    SD copy and upload Loppunut left

    I am a mechanical engineer who has worked with many domestic USA vendors and overseas vendors on embedded products. I currently have one product that needs to be ported from a Tiva MCU to an ESP32. All current code is written in c. We currently have code written for TM4C1294NCPDT on a custom board with 2G modem. However, now I want to use an inexpensive ESP32 board with external SD card and external Xbee LTE M Module. STEP 1: Connect to WIFI SD card and copy pictures over to board SD card – This Code has not been written Digital pictures are located on a WIFI SD card in external camera. This card…. This SD card natively runs a web server that allows images to be saved on it from a camera while also allowing a

    €1412 (Avg Bid)
    €1412 Keskimäär. tarjous
    13 tarjoukset

    Hi! I need urgent help in a project. Project: Altutude click is getting some values. These values should be send via CAN-module to the second Tiva board EK-TM4C1294XL, which should give out these values in a beep sound via Buzz click.

    €104 (Avg Bid)
    €104 Keskimäär. tarjous
    4 tarjoukset

    I am a mechanical engineer who has worked with many domestic USA vendors and overseas vendors on embedded products. I currently have one product that needs to be ported from a Tiva MCU to an ESP32. All current code is written in c. We currently have code written for TM4C1294NCPDT on a custom board with 2G modem. However, now I want to use an inexpensive ESP32 board with external SD card and external Xbee LTE M Module. STEP 1: Connect to WIFI SD card and copy pictures over to board SD card – This Code has not been written Digital pictures are located on a WIFI SD card in external camera. This card…. This SD card natively runs a web server that allows images to be saved on it from a camera while also allowing a

    €1888 (Avg Bid)
    €1888 Keskimäär. tarjous
    12 tarjoukset
    tiva c launchpad Loppunut left

    interfacing of LCD, keypad, stepper motor and light sensor with tiva c series launchpad

    €113 (Avg Bid)
    €113 Keskimäär. tarjous
    3 tarjoukset
    Tiva C series Loppunut left

    interfacing lcd , keypad, stepper motor, and electronic brick sensor RB-ite-24 using TIVA C series launchpad

    €121 (Avg Bid)
    €121 Keskimäär. tarjous
    2 tarjoukset

    write a program to interface LCD , keyboard with tivc c board. control stepper motor position using keypad interface sensor ( light sensor ) with tiva board

    €106 (Avg Bid)
    €106 Keskimäär. tarjous
    9 tarjoukset