Oscilator orcad työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    443 oscilator orcad työtä löytyi, hinnoittelu EUR

    hello, do you have experience with PSPICE orcad capture cis lite?

    €44 (Avg Bid)
    €44 Keskimäär. tarjous
    1 tarjoukset

    hello, do you have experience with PSPICE orcad capture cis lite?

    €45 (Avg Bid)
    €45 Keskimäär. tarjous
    1 tarjoukset

    We have a 2 layer PCB layout that needs some changes: 1. PMOS have drain and source inverted. This has to be fixed. 2. The connection that was missing from R24 to R26 has to be fixed. 3. Terminal Block connector footprint to be changed. We will provide the PCB files once the job is awarded.

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    1 tarjoukset

    We have a 2 layer PCB layout that needs some changes: 1. PMOS have drain and source inverted. This has to be fixed. 2. The connection that was missing from R24 to R26 has to be fixed. 3. Terminal Block connector footprint to be changed. We will provide the PCB files once the job is awarded.

    €23 (Avg Bid)
    €23 Keskimäär. tarjous
    4 tarjoukset

    Need to design a differential bjt amplifier in two hours. Instructions will be given and have to make the circuit in PSPICE Orcad accordingly. Simple job. A experienced person can do in 10 mins. budget = $20. Quick work.

    €21 (Avg Bid)
    €21 Keskimäär. tarjous
    8 tarjoukset

    DESIGN OF A HALF W...HALF WAVE, ZENER REGULATED VOLTAGE SUPPLY NOTE: YOU CAN USE EITHER MULTISIM (Ver. 11 and higher) OR ORCAD FOR THIS PROJECT. IF YOU CHOSE TO USE ORCAD, ADJUST THE SCHEMATIC AND SIMULATION OUTPUT PARAMETERS TO MATCH THOSE DESCRIBED. IF THE ORCAD OUTPUT IS NOT AS DESCRIBED IN THE PROJECT, WHICH ASSUMES YOU WILL BE USING MULTISIM

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    1 tarjoukset
    pcb layout design Loppunut left

    pcb layout design,library creation and verification,migration boards,cadence,metorgaphics,orcad,altium

    €4 / hr (Avg Bid)
    €4 / hr Keskimäär. tarjous
    2 tarjoukset

    Convert simple ORCAD PCB Schematic (DSN File) to Eagle PCB Format Schematic (SCH File). File attached. We have several more files to convert and are also looking for a good Eagle PCB CAD designer for future projects.

    €116 (Avg Bid)
    €116 Keskimäär. tarjous
    37 tarjoukset

    ...then one hundred customers with sixteen designers distributes throughout the Netherlands and Belgium. We make use of the following CAD applications, Altium Designer, Cadence Orcad, Allegro, Mentor Expedition, Pads, DxDesigner, Zuken Cadstar, CR5000. All designers make use of the central footprint library following the IPC-7351 standard and symbol library

    €37 (Avg Bid)
    €37 Keskimäär. tarjous
    11 tarjoukset

    ...54 mm RMC (details shared later). PCB specifications: refer our PCB fabricator (details shared later) PCB size: l x b x h 55 mm x 26 mm x 22 mm (h max) PCB CAD: KiCAD / OrCAD-Allegro Microcontroller: STM8S003F3P6 with Cosmic compiler with STVD IDE Requirement: The circuit would be connected in series between the AC source and fan as load. The

    €443 (Avg Bid)
    €443 Keskimäär. tarjous
    22 tarjoukset

    ...then one hundred customers with sixteen designers distributes throughout the Netherlands and Belgium. We make use of the following CAD applications, Altium Designer, Cadence Orcad, Allegro, Mentor Expedition, Pads, DxDesigner, Zuken Cadstar, CR5000. All designers make use of the central footprint library following the IPC-7351 standard and symbol library

    €54622 (Avg Bid)
    €54622 Keskimäär. tarjous
    7 tarjoukset

    We have a 2 layer PCB layout that needs some changes: 1. PMOS have drain and source inverted. This has to be fixed. 2. The connection that was missing from R24 to R26 has to be fixed. 3. Terminal Block connector footprint to be changed. We will provide the PCB files once the job is awarded.

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    1 tarjoukset

    orcad symbols for some power circuits and a connector ..................................................................................................................................................

    €113 (Avg Bid)
    €113 Keskimäär. tarjous
    14 tarjoukset
    orcad symbols Loppunut left

    orcad symbols for some power circuits and a connector ..................................................................................................................................................

    €44 (Avg Bid)
    €44 Keskimäär. tarjous
    1 tarjoukset

    I need an expert of electronic schematic entry, and especially ORCAD, for capturing an electronic schema. I have the paper version with a similar design and need to transform in electronic format using ORCAD. The schema is based on XILINX ZYNQ FPGA and DDR memories, and power supply.

    €586 (Avg Bid)
    €586 Keskimäär. tarjous
    4 tarjoukset

    Design a Orcad lib with some xilinx devices and more.. we can talk about the price and scope of this job during the start

    €104 (Avg Bid)
    €104 Keskimäär. tarjous
    6 tarjoukset
    power Electronics Loppunut left

    You are free to choose any simulation software, such as Pspice (Orcad Cadence Capture), Matlab/Simulink, Matlab/SimPower, or MultiSim. I have a case study and I need to answer the question

    €42 (Avg Bid)
    €42 Keskimäär. tarjous
    7 tarjoukset

    I need a design to be build on OrCAD. The project will have about 3000 pins. Should handle some DDR3, DSP, microcontrollers. I need an estimated bid and if can give a per-pin price it would be great. Feel free to bid.

    €5953 (Avg Bid)
    €5953 Keskimäär. tarjous
    11 tarjoukset
    OrCAD Designer. Loppunut left

    I need a design to be build on OrCAD. The project will have about 3000 pins. Should handle some DDR3, DSP, microcontrollers. I need an estimated bid and if can give a per-pin price it would be great. Feel free to bid I understand this project is not between $10-30.

    €1957 (Avg Bid)
    €1957 Keskimäär. tarjous
    5 tarjoukset

    We have a 2 layer PCB layout that needs some changes: 1. PMOS have drain and source inverted. This has to be fixed. 2. The connection that was missing from R24 to R26 has to be fixed. 3. Terminal Block connector footprint to be changed. We will provide the PCB files once the job is awarded.

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    19 tarjoukset
    Get Data Entry Done Loppunut left

    Orcad or Pads Logic schematic capture on ITAR restiricted data. Worker must present proof of US Citizenship. NDA required. We will provided List of Material in Excel for one or more complex RF and digital circuits and a point-to-point netlist. We estimate 300 hours of time to complete one of two projects.

    €596 (Avg Bid)
    €596 Keskimäär. tarjous
    15 tarjoukset

    ...job is about converting an electrical schematic made in Kicad / Altium into Orcad format. - Main schematic, Kicad, comprised of 4 pages. - Two smaller schematics made in Altium, comprised of 2 pages. See attachment for preview. You will deliver schematic file into Orcad (allegro cadence)16.3, or lesser version. Work under NDA, confidential

    €13 - €22 / hr
    Mainostettu Kiireellinen Sinetöity Salassapitosopimus
    €13 - €22 / hr
    6 tarjoukset
    €200 Keskimäär. tarjous
    12 tarjoukset
    Project for Atom7 Loppunut left

    ASA Taimoor. I have a project that needs to be drawn in orcad schematics and also layout. Is this somethign you would be interested in? Thanks.

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    1 tarjoukset

    I am seeking someone to convert OrCAD/Allergo PCB/Schematic files to Eagle (7.0+) for Beaglebone Black See here: [kirjaudu nähdäksesi URL:n]:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28C.29 System Reference Manual Rev C.1(PDF) Schematic (PDF) Schematic (OrCAD) BOM (xls) PCB Files (Allegro and Gerbers) 6 layers PCB. The goal is to be

    €918 (Avg Bid)
    €918 Keskimäär. tarjous
    25 tarjoukset

    PCB layout design for a specific size is required PCB Size: 91 X 71 mm No of layers: Double Sided PCB We can supply: Schematic, Netlist file, suggested PCB layout...layout design for a specific size is required PCB Size: 91 X 71 mm No of layers: Double Sided PCB We can supply: Schematic, Netlist file, suggested PCB layout in old OrCAD 8.0.

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    26 tarjoukset

    ...[kirjaudu nähdäksesi URL:n] The schematics/board layouts for the devkit available for download in OrCAD/PADS formats: [kirjaudu nähdäksesi URL:n] [kirjaudu nähdäksesi URL:n]

    €238 (Avg Bid)
    €238 Keskimäär. tarjous
    22 tarjoukset

    someone whose familiar with amplifier so he/she can do some calculation related to it .Also some one know to build circuits using OrCAD capture or Pspice

    €29 (Avg Bid)
    €29 Keskimäär. tarjous
    4 tarjoukset

    I have Altium files (GM1,GM2,GTP) and i need orcad (BRD,DSN,OPJ)

    €23 (Avg Bid)
    €23 Keskimäär. tarjous
    3 tarjoukset

    Looking for a person to do a simple project for Designing and simulation of an audio amplifier using Orcad PSpice. Need it done in 2 days so people who are available during this time only those should apply.

    €102 (Avg Bid)
    €102 Keskimäär. tarjous
    3 tarjoukset

    ...ON/OFF lights, fans, LPG gas leakage alarming and water valve controlling etc. vi. Pre-Amplifier Design for constant Current Transmission Design Team ORCAD vii. Solar Tracking System using Signal Microcontroller Firmware Team Embedded C programming, Si-Labs IDE Involved to design and develop the Firmware and Hardware

    €508 - €1016
    €508 - €1016
    0 tarjoukset

    Need an OrCAD professional to review my .brd files for errors, and generate the Gerber files for production of the board. Currently the board has been produced for testing, but will not boot, so there must be an error with the trace or something that is causing the issue. The professional selected will need to supply boot information and instructions

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    2 tarjoukset

    Need to design PCB for Ardiuno Uno based 4 Channel Datalogger. 2 layer PCB The circuit consis...Terminal block for input and power. input from us * Schematic on paper delivery * Schematic on design tool with ERC * PCB design with DRC * 3D model of PCB simple version OrCad preferred. Altium also Ok Budget: 80 USD More VC details on private chat.

    €100 (Avg Bid)
    €100 Keskimäär. tarjous
    29 tarjoukset

    Need to design PCB for Ardiuno Uno based 4 Channel Datalogger. 2 layer PCB The circuit consist of RTC chip ...Terminal block for input and power. input from us * Schematic on paper delivery * Schematic on design tool with ERC * PCB design with DRC * 3D model of PCB simple version OrCad preferred. Altium also Ok More VC details on private chat.

    €180 (Avg Bid)
    €180 Keskimäär. tarjous
    9 tarjoukset
    EXPERT ADVISOR Loppunut left

    need expert advisor for forex trade as per some point depend on bollinger band stock oscilator parbolic sar + my template ---------- number of open trade must not be exeed 5 trades and lot size 0.01

    €109 (Avg Bid)
    €109 Keskimäär. tarjous
    3 tarjoukset

    Hi, i...too much work to do this on my own. i already created the schematics in orcad capture . preferable i want the layout developed in ultiboard by importing the netlist or redraw the schematic. But i also accept that you finish the PCB in orcad layout. The component placing in orcad is done for 90%, so footprints are also created and assigned.

    €371 (Avg Bid)
    €371 Keskimäär. tarjous
    15 tarjoukset

    i have rough design of pcb and want a gerber output of it.. u can design in any software(altium, eagle, orcad, dip trace...) required in 3 days.. i have daily basis requirement.. so if i like your work i will give project every week.

    €11 (Avg Bid)
    €11 Keskimäär. tarjous
    12 tarjoukset

    i have rough design of pcb and want a gerber output of it.. u can design in any software(altium, eagle, orcad, dip trace...) required in 3 days.. i have daily basis requirement.. so if i like your work i will give project every week.

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    20 tarjoukset

    Hi, i...too much work to do this on my own. i already created the schematics in orcad capture . preferable i want the layout developed in ultiboard by importing the netlist or redraw the schematic. But i also accept that you finish the PCB in orcad layout. The component placing in orcad is done for 90%, so footprints are also created and assigned.

    €345 (Avg Bid)
    €345 Keskimäär. tarjous
    22 tarjoukset

    ... I have open source design of sim900 based gps tracker , as [kirjaudu nähdäksesi URL:n] My requirement is 1. Redesign pcb [ to make smaller ] [ Orcad file will be provided , allegro files will be deliverabels ] 2. Prototype samples with assembled parts 3. Test prototype with basic code [ provided by the dsscircuits ]

    €411 (Avg Bid)
    €411 Keskimäär. tarjous
    8 tarjoukset

    Two layers simple design. I will provide all the information. The design should include: Part searches for footprint calculation Schematic footprint creation/import PCB layout Gerber file creation and verification (include the drill file, the top, bottom and outline layers, silk screen and solder mask)

    €150 (Avg Bid)
    €150 Keskimäär. tarjous
    4 tarjoukset

    ...PCB y aplicar pequeñas mejoras para posterior fabricación de prototipo. Plazo aproximado de dos meses. Perfil ingeniero técnico con conocimientos de electrónica de sonido y ORCAD o similar....

    €242 (Avg Bid)
    €242 Keskimäär. tarjous
    12 tarjoukset

    using a schematic i need a PCB designer in ALTIUM or Orcad ...

    €487 (Avg Bid)
    €487 Keskimäär. tarjous
    15 tarjoukset

    Hi, Can somebody help me installing cadence allegro v16.6 on windows 10 you must have the software so you can install remotely or guide me how to install

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    2 tarjoukset

    Convert a schematic and PCB layout done in Orcad to Altium 16.x.x. I'd like the output to be a PCB project in Altium with the Schematic and Layout linked. Please fix reference designators as needed if they get screwed up in the transfer.

    €322 (Avg Bid)
    €322 Keskimäär. tarjous
    26 tarjoukset

    ...regulator and power IC, from AC input to DC output. • Experienced in assembly, Serial Peripheral Interface, PCB fabrication, electronic components, PCB layout, Schematic Capture OrCAD, PADS, Documentation BOM, Schematic capture tools. • I am able to write some codes in Python, Java, Selenium, HTML, XML, REST API webdriver for automation test.

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    5 tarjoukset
    Orcad PCB design Loppunut left

    Hi , I need to design thermometer PCB in OrCad Capture

    €292 (Avg Bid)
    €292 Keskimäär. tarjous
    10 tarjoukset

    ...components -Route PCB -Arrange reference designation on silkscreen and Assembly Drawing -Generate Gerbers -Back-Annotate in OrCAD -Generate the Pick and Place (x y) file I do layout occasionally and I'm using PADS 2007 and OrCAD 16.5. If you use a higher version of PADS you would need to save in ASCII format so I am able to open your files. I estimate

    €8 / hr (Avg Bid)
    €8 / hr Keskimäär. tarjous
    6 tarjoukset

    I have a PCB Project that is nearly finished. The original engineer designed the PCB in Orcad and PADS. I don't like these software and would like the PCB Project to be recreated in Completely in ALTIUM 13 or newer. I will provide Full Schematics disclosed to the final candidate. This project pays Exactly $1000USD, Not More, Not less. All bidders

    €903 (Avg Bid)
    €903 Keskimäär. tarjous
    31 tarjoukset

    Hi, I have a schematic which can be completed in day 1 or 2days and has the following TQFP 44 pin uC Sugar Cube Relay IRFZ44 mosfet - 4 nos 7805 and LM1117 I hope you imagine the design complexity with this. I prefer designer from Chennai or Bangalore. Pls contact via Freelancer chat at the earliest

    €110 (Avg Bid)
    €110 Keskimäär. tarjous
    17 tarjoukset