Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Taidot
Kielet
    Työn tila
    8,091 motor ebay työtä löytyi, hinnoittelu EUR

    The main goal is to write a program for a ST32 mc that drives a stepper motor driver. (STEP-DIR) The hardware has a touch screen that requires menu system where user can set various settings. Although we already built the hardware but it needs to be changed as we want it to be able to save and store profile settings. Currently we don't have memory

    €984 (Avg Bid)
    €984 Keskimäär. tarjous
    32 tarjoukset
    SOLIDWORKS_01 5 päivää left
    VARMENNETTU

    ...all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5

    €2 / hr (Avg Bid)
    €2 / hr Keskimäär. tarjous
    11 tarjoukset

    We've developed an e-Bicycle and are in the process of developing a motor package, hence we need reduction gearing which will be made of a polymer. I have no idea what it's likely to cost to develop what we want (referring to estimated budget below).

    €2352 (Avg Bid)
    €2352 Keskimäär. tarjous
    20 tarjoukset
    SOLIDWORKS_ANSYS -- 02 4 päivää left

    ...all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5

    €54 (Avg Bid)
    €54 Keskimäär. tarjous
    12 tarjoukset
    Crane_design_Mechanical_electrical 4 päivää left
    VARMENNETTU

    ...all parts has to be 2 ○ Assume a service (Bearing) life of 120 kh ○ Extend shaft 4 inches past housing with ½ inch transverse hole for a pin fastening ● Input (from electric Motor, McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5

    €91 (Avg Bid)
    €91 Keskimäär. tarjous
    11 tarjoukset

    INTERESTED CANDIDATE CONTACT FOR MORE DETAILS

    €725 (Avg Bid)
    €725 Keskimäär. tarjous
    19 tarjoukset
    Kaman Corpration 4 päivää left

    Kaman Distribution is a leading distributor of industrial parts, and operates more than 200 customer se... electrical, linear, hydraulic and pneumatic systems as well as belting and rubber fabrication, customized mechanical services, hose assemblies, repair, fluid analysis and motor management. The distribution group is a segment of Kaman Corporation.

    €30 / hr (Avg Bid)
    €30 / hr Keskimäär. tarjous
    17 tarjoukset

    ...physical, emotional, and mental health, including: • Appetite, digestion, and hunger • Cellular energy • Emotions • Memory • Metabolism • Mood • Motivation, pleasure, and reward • Motor control • Immune function • Inflammation • Pain • Reproduction and fertility • Sleep • Stress response • Temperature regulation ...

    €49 (Avg Bid)
    €49 Keskimäär. tarjous
    48 tarjoukset
    Web Scraping system 3 päivää left

    We w...python->mysql; ... server hosted, crawlers specialized hosting, etc..). The five websites to be crawled (for now) are: [kirjaudu nähdäksesi URL:n] [kirjaudu nähdäksesi URL:n] [kirjaudu nähdäksesi URL:n] [kirjaudu nähdäksesi URL:n] [kirjaudu nähdäksesi URL:n] We probably need maintenance services after the end of the project.

    €189 (Avg Bid)
    €189 Keskimäär. tarjous
    12 tarjoukset
    EMW(Easter motor works) 3 päivää left

    Automobile workshop

    €64 (Avg Bid)
    €64 Keskimäär. tarjous
    4 tarjoukset
    Car Yard part 2 3 päivää left
    VARMENNETTU

    ...basically any one that would like to sell there car without having to do it cause they dont have the time and hassle free. We also want to add trucks, boats motor bikies,earth moving,caravans, motor homes. URL [kirjaudu nähdäksesi URL:n] URL [kirjaudu nähdäksesi URL:n] URL [kirjaudu nähdäksesi URL:n] If you don't know

    €13 / hr (Avg Bid)
    €13 / hr Keskimäär. tarjous
    11 tarjoukset
    Stepper motor bluetooth 2 päivää left
    VARMENNETTU

    I'm looking for someone able to design a stepper motor turning left or right through bluetooth from app Android. More details will be provided after NDA signature.

    €416 (Avg Bid)
    Salassapitosopimus
    €416 Keskimäär. tarjous
    66 tarjoukset
    Stone Ridge Wipe 1 päivä left

    design small pump motor control timer control with both selectable on time and selectable off time. I wish to tell the pump to go on from 0-99 sec then stay off for 0-999 secs in a series of repeating cycles. Fractional horse peore 12 v.

    €1831 (Avg Bid)
    €1831 Keskimäär. tarjous
    27 tarjoukset

    MAVERICK MOTORS USA INC, MANUFACTURER DEVELOPER, DESIGN AND MANUFACTURER AS WELL ASSEMBLER OF OWN BRAND NAME OF UTILITY VEHICLES , ALL TERRAIN VEHICLES AND MOTOR SCOOTERS , PROJECT MAVERICK IS BUILDING A NORTH AMERICAN MANUFACTURING AND ASSEMBLY PLANT

    €17 / hr (Avg Bid)
    €17 / hr Keskimäär. tarjous
    28 tarjoukset

    Our company provides pre-purchase surveys for sailing and motor yachts in Greece and the Mediterranean. I want to appear in the first page of google search results for "yacht survey' etc... We have a TON of experience but we're just starting to get formalized around our marketing this year and need help becoming more visible.

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    43 tarjoukset

    ...Voltage module for 12 volt main = N103 5. L298N PWM DC motor drive for 4 drive motors w/ encoders. Drives to be variable and one set trimmable via control panel (auto match rotation for forward/reveres/spin). 6. 2 6DOF (left/right) manipulators, selectable control a/tandum/b. 7. Gimbal motor controler, On/off variable speed from control panel (360

    €428 (Avg Bid)
    €428 Keskimäär. tarjous
    9 tarjoukset

    [kirjaudu nähdäksesi URL:n] I like the above Video, i want to ad my voice to something similar and use it for my company. Looking for new freelancer who want to make some good work, no fantasy prices. We are chiptuning company.

    €354 (Avg Bid)
    €354 Keskimäär. tarjous
    65 tarjoukset
    Write Content Loppunut left

    ...Preparation & Auditing Industry Advertising, Marketing and PR Aerospace and Defense Alcoholic Beverages Alternative Energy Sources Audio, Video and Photography Automobiles, Boats and Motor Vehicles Automotive Repair and Maintenance Banks Biotechnology Chemicals and Petrochemicals Colleges and Universities Computer and Electronics Computer and Electronics Other

    €31 (Avg Bid)
    €31 Keskimäär. tarjous
    48 tarjoukset
    Robotics Project Loppunut left

    Write the motion control software for 4 DOF arm and integrate with vision system. The system will be based on raspberry pi platform running ubuntu. The servo motor company provides very good libraries and documentation. Will need kinematics figured out basically.

    €30 / hr (Avg Bid)
    €30 / hr Keskimäär. tarjous
    19 tarjoukset

    Need assembly code for Dragon12 board that will use a motion sensor or ke...Dragon12 board that will use a motion sensor or keypad code to open a door with a stepper motor. The motor needs to turn so many rotations to open, then display on the LCD closing door with a count down of 10 seconds and then close the door/turn the stepper motor the other way

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    5 tarjoukset

    I have a patent by Nicola Tesla of his combution motor and I need someone to interpret and draw a working model so I can reproduce the motor if I took it to a manufacturer

    €145 (Avg Bid)
    €145 Keskimäär. tarjous
    30 tarjoukset

    need to remove heat by the water cooling jacket i have 3d design

    €57 (Avg Bid)
    €57 Keskimäär. tarjous
    13 tarjoukset
    Qlik Project Loppunut left

    ...attached wireframe as a mock-up for your dashboard. Background: TSheets is our timetracking tool. Employees and vendors log in daily and enter time by Customer (i.e. Ford Motor Company) and Job (or project, i.e. GDIA Engagement). Vendors are subcontractors, but employees and vendors are really the same thing as they both log time against jobs. Non-billable

    €190 (Avg Bid)
    €190 Keskimäär. tarjous
    13 tarjoukset

    ...purchase and assemble all the mechanical parts and motor in my end and it is exclusive from the project price. Below are the work requirement : 1. Design chassis that supports 2/3 axis rotation, hold the gas cutter. 2. Help me to choose the right motor according to our need. 3. Help me to install motor both mechanically and programmatically. FYI : I know

    €251 (Avg Bid)
    €251 Keskimäär. tarjous
    6 tarjoukset

    Wanted Sales agents for selling Life Insurance. Health insurance, and motor insurance policies on commission basis.

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    1 tarjoukset
    Sales Agents Loppunut left

    Wanted Sales agents for selling Life Insurance. Health insurance, and motor insurance policies on commission basis.

    €12 (Avg Bid)
    €12 Keskimäär. tarjous
    2 tarjoukset

    ...board support which i am using to run DC motor of 3-4V and also use it as power bank by connecting it to USB step UP booster. I could successfully create the circuit and connected TP4056 battery protect with 3.7V Li-Ion 18650 battery from where i have connected directly the battery terminals through switch to motor and also i have connected input current

    €73 (Avg Bid)
    €73 Keskimäär. tarjous
    8 tarjoukset

    We are looking to develop a stepper motor driver board to control 7 stepper motor through RS485 (Modbus) protocol. It will control 4.5Nm (5Amps) & 8Nm (6Amps) Stepper motor with encoders. Input volt: 230

    €677 (Avg Bid)
    €677 Keskimäär. tarjous
    13 tarjoukset

    Construir uma base de dados sobre Angola com motor de busca rápido

    €3374 (Avg Bid)
    €3374 Keskimäär. tarjous
    11 tarjoukset
    Trophy icon Design a Logo A MARKETPLACE Loppunut left

    NAME: MOTOR PARTS MARKET Slogan: Africa's N0. 1 Autoparts Marketplace domain: [kirjaudu nähdäksesi URL:n]

    €13 (Avg Bid)
    €13
    44 työtä

    make a simple firmware for a gsm pcb board to switch on/off a motor when it receive a call from authorized numbers. the commands required: 1. Add a number 2. delete a number 3. report the registered numbers 4. change password 5. the board has wifi built in, so need to enable the firmware installation and update via wifi as well

    €148 (Avg Bid)
    €148 Keskimäär. tarjous
    26 tarjoukset

    ...to be transfered from kicad to eagle. we are using eagle 9.1 and we need to reconnect the board and make the board double sided and as small as possible. This board has 4 motor drivers that controll 8 motors. once we finish the board we need to remove those drivers and and add 2 better smaller drivers that contro 8 motors also. once we do this we

    €59 (Avg Bid)
    €59 Keskimäär. tarjous
    2 tarjoukset

    ...of the progrm however I have some debug issues to resolve The Arduino code C++ collects multiple serial and I2C data streams and then steers a robot using a Sabertooth 32*2 motor controller. The Adruino mega is commected to a gps, 2 compasses (one seria and one I2C) a LCD screen and SD card reader. The software works however I am having some trouble

    €175 (Avg Bid)
    €175 Keskimäär. tarjous
    8 tarjoukset
    arduino code help Loppunut left

    i have an arduino uno, adafruit motor shield, 10k joystick potentiometer, and nema 17 stepper motor from adafruit. i would like to cotrol the speed and dirction of the motor with the potentiometer.

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    2 tarjoukset

    I need you to develop an arduino program for my project, US sensors and motor control expertise is required.

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    21 tarjoukset

    ...the program (such as 20 meters per hour) and use a control function to correct the actual value so that the setpoint is reached. This should be done with two relays electric motor. I want to be able to influence the rule strength and it must be ensured that both relays are never operated in parallel. I will pay only after complete and correct completion

    €104 (Avg Bid)
    €104 Keskimäär. tarjous
    6 tarjoukset
    arduino coding Loppunut left

    A camera slider using a stepper motor, rocket switch to contol the position at wich side of the slider and a potentiomiter for the speed

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    14 tarjoukset

    an arduino code regarding a stepper motor a rocket switch and a potentiomiter i am making a camera slider for time lapses... need a bit of help but i would really really appreciate it if it was sooner

    €51 (Avg Bid)
    €51 Keskimäär. tarjous
    21 tarjoukset

    ...robot: [kirjaudu nähdäksesi URL:n]:1241491/#made With the addition of a servo motor gripper to pick up an object and place it at a predetermined position. The control is to be done using an Arduino UNO and CNC shield running 3 Nema 17 stepper motors and one servo motor. The program is to have an HMI to control the teaching and show the output angles

    €128 (Avg Bid)
    €128 Keskimäär. tarjous
    12 tarjoukset

    I need this inverter for driving 3phase asynchronous motor. I dont have 3phase AC input. This inverter's output should be at - 50Hz, - 2,2kW - 380V phase-to-phase voltage. Terminal box should be located closely (for input and output connections) Earth connection Cooler design and fan design for IPM and diodes TMS320 series microprocessor can be

    €2161 (Avg Bid)
    €2161 Keskimäär. tarjous
    24 tarjoukset

    Making some t-shirts & hoodies for my brand. Need some CREATIVE/ORIGINAL d...Products: T-Shirts, Hoodies, Sweatshirts & Caps Concept: Forbidden Fruit Styles I like: Renaissance Art (i.e. Francisco De Goya), Grunge, Punk, Alternative, Witch, Steam Punk, Motor Club Similar Brands: Anti Social Social Club, Killstar, Disturbia, GoodBye Bread, Drop Dead

    €75 (Avg Bid)
    Taattu Salassapitosopimus
    €75
    104 työtä

    Mobile App Development for pickup and the delivery of the goods using motor bike riders

    €1380 (Avg Bid)
    €1380 Keskimäär. tarjous
    155 tarjoukset

    ...receive a PIC SIGNAL level of 3,3 V (c) and will be connected to 3 LEDs (e). The last one (SWITCH 4) is a switch that turns “on” and “off” a motor. It will receive 5V (instead of 3,3V) and will be connected to a motor (f). Again, we are only looking for the design and prototype of the switch circuits (SWITCH 1 to 4) so we only need pads for allowing solder...

    €132 (Avg Bid)
    €132 Keskimäär. tarjous
    13 tarjoukset

    Hi! I've been ask...I've been asked to find a Mexican-born, native Spanish speaker to help us translate an entire website (approx. 140,000 words). The topic is a bit technical, dealing with fine motor control, angular position, and torque transmission technology used widely in consumer electronics, automotive, aviation, medical, and other industries.

    €3812 (Avg Bid)
    €3812 Keskimäär. tarjous
    74 tarjoukset

    Hi , i need custom code ...provided. 3 x Analog Inputs 2 x Temperature Monitoring 1x Voltage Monitor - With Conditional Logic to Control VSD - 1 Analog Out Put Alternatively Control 1x Small Servo Motor All inputs and outputs must be supplied with wiring schematic and comments in code for custom parameter sets. All source files must be supplied.

    €144 (Avg Bid)
    €144 Keskimäär. tarjous
    33 tarjoukset

    ...input from sensors a. Ultrasonic sensor Where distance from the object is registered b. Microphone Where any kindof sound waves are registered 3. Output as SMD motor vibrations a. Passing raw output from above sensors to motors in any way that it can be easily distinguished when values vary, like in case of UltraSonic, it can be based

    €56 (Avg Bid)
    €56 Keskimäär. tarjous
    10 tarjoukset

    I need someone who have proper knowledge of Fuzzy Type 2 and how to implement it in MATLAB on a model. like DC motor (details will given in message) Modelling should be done on Simulink.

    €116 (Avg Bid)
    €116 Keskimäär. tarjous
    8 tarjoukset

    ...Jewellery castable prototypes. This printer will be able to print a 3D design in a photopolymer resin. For This project I have decided to use a DLP LIghtcrafter 6500EVM , steper motor for Z-axis ,Touch screen , and DRV88825 control ic along with the Aurdino [kirjaudu nähdäksesi URL:n] Lightcrafter 6500EVM has to be modified for the wavelength 405nm and a shorter focus

    €1893 (Avg Bid)
    €1893 Keskimäär. tarjous
    5 tarjoukset

    info to attach 2017 Ranger Z521C For Sale, Mercury Pro XS 250, Lowrance HDS 12 & HDS 9; structure scan, Minnkota Fortrex 112, loaded, only 28.5 hours on motor, Like New Condition size w: 2550 h: 1650 px the winner will get permanent job up to 800 $ per month

    €6 (Avg Bid)
    Taattu
    €6
    45 työtä